Ricoh Network Issue
bura6868
Posted messages
5
Status
Member
-
JL Veco Posted messages 344 Registration date Status Member Last intervention -
JL Veco Posted messages 344 Registration date Status Member Last intervention -
Hello,
I have acquired a Ricoh Aficio MP C2050 photocopier.
Since my brother tinkered with the network, I can no longer send scans to the file server, which is my Freebox. Indeed, when I go to System Settings > Administrator Tools > Address Book Management > New Program > Browse the Network
it displays "Unable to find the specified path. Check the settings."
My Freebox is on the network 192.168.1.254
My printer is at the address 192.168.1.2 with a fixed IP
I have explored all the options with no results, thank you for your response.
For your information, the network printer works perfectly. And I am going through a router, which is the Freebox.
I have acquired a Ricoh Aficio MP C2050 photocopier.
Since my brother tinkered with the network, I can no longer send scans to the file server, which is my Freebox. Indeed, when I go to System Settings > Administrator Tools > Address Book Management > New Program > Browse the Network
it displays "Unable to find the specified path. Check the settings."
My Freebox is on the network 192.168.1.254
My printer is at the address 192.168.1.2 with a fixed IP
I have explored all the options with no results, thank you for your response.
For your information, the network printer works perfectly. And I am going through a router, which is the Freebox.
1 answer
Hello
The easiest way is through the web
launch your browser > address bar: IP address of your 2050.
click on connection to enter admin mode / login > admin > no password
click on address book > new user:
you can choose > email address or SMB.
for SMB > you must specify the username of the PC and the password, the address is of the form: \\computer name\shared folder
instead of the computer name you can also enter the IP address of your PC.
Best regards
JLV
The easiest way is through the web
launch your browser > address bar: IP address of your 2050.
click on connection to enter admin mode / login > admin > no password
click on address book > new user:
you can choose > email address or SMB.
for SMB > you must specify the username of the PC and the password, the address is of the form: \\computer name\shared folder
instead of the computer name you can also enter the IP address of your PC.
Best regards
JLV
I did as you told me
However, the printer displays "unable to find the specified location"
I would like the scans to go into a folder on my FREEBOX as before
so I put in the SMB box: \\FREEBOX_S\Hard drive\scan
and also \\192.168.1.254\Hard drive\scan
but without result. I think there are other settings to check but I can't find them.
It's the same for emails, it doesn't work. THANK YOU
the scan works, but the email still doesn't :( I'm still fiddling a bit, I think I'm going to find it
the solution was to put the IP address of the box and not FREEBOX in the link :p
in my opinion, you have an authentication problem
the smb protocol on the ricoh requires authentication AND a password
or you can install the scan folder on your pc
good luck
whenever you're ready