View original (French)

Enable TCP port on eMule

Solved
musashi34 Posted messages 11 Status Member -  
 gil -
Hello

It is impossible to activate the TCP port on eMule (so I'm on lowID)! Can someone help me? Thanks in advance!
Configuration: Windows XP Internet Explorer 6.0

34 answers

  • 1
  • 2
  1. Anonymous user
     
    You need to open the port on your router (or your box)
    and it depends on your equipment.
    18
    1. musashi34
       
      Hi and thanks for your response!

      I have a Neuf box (the latest one)! Nothing to activate on that side!
      What do you want to know about the equipment?
      0
    2. durden
       
      Hi, I have the same problem with my Neuf box... since I switched to them, I'm on low ID! (Free --> Neuf box) I think the problems come from that.
      Thanks for helping me configure it; for your information, I have already opened some ports on my Neuf box.
      0
    3. musashi34 > durden
       
      Hi

      thanks for your response! Sorry, I'm really bad at this, but how did you do it? I'm connected via Wi-Fi, does that make a difference??

      thanks!!!
      0
    4. fred > musashi34
       
      hello I had the same issue with my live box. You need to configure the router of the live box and everything works fine.
      0
    5. musashi34 > durden
       
      Hi

      As soon as I know more, I'll keep you posted.
      If all goes well, I should receive screenshots where everything is explained. If they arrive, I'll send them to you.

      Bye
      0
  2. Carolo_Carlito Posted messages 292 Status Member 21
     
    Downloading is not illegal; it's what you download that CAN be.
    4
  3. jp gourio
     
    Give me your email, I will send you an attachment with a screenshot of
    my personal settings or by phone if you prefer.
    2
    1. musashi34
       
      Hi and thank you for your response!

      Here is my email:
      Email address removed CCM Moderation

      That's really nice! Thank you!
      0
    2. LoulouMastaaa
       
      Hello,

      I am quite new, but I would still like to get my eMule working. Could you send me the file you mentioned to help me out? Thank you. Email address removed Moderation CCM
      0
  4. BJPG Posted messages 7 Status Member 7
     
    1° Install eMule
    2° Launch the assistant for the first launch of eMule (tools). When you reach the port selection, BEFORE running the test, launch "configuration
    of your Neufbox".
    3° Click on network
    4° Click on NAT
    5° Fill in the fields as shown in the screenshot. You will find your IP address by typing "ipconfig" in the "run" command.
    6° Don't forget to save your settings.
    7° Close your connection on the 9 and now perform the port test.
    Also, be careful with your firewall. I use Ashampoo without any problems.
    It works for me, so it should work for you too.
    Sincere regards. JP
    2
    1. toto
       
      Can you say what to fill in the boxes for those who don't have the screenshot?

      Thank you.
      0
    2. Folgor
       
      Hi,
      Can you send me the same thing, thanks.
      Email address removed CCM Moderation
      0
    3. zol
       
      same problem, but with the Freebox...
      I can't open the ports.
      0
    4. wellios
       
      Thank you JP for your advice on eMule,
      I just switched to high ID thanks to you...
      thank you

      wellios_lesversluisants...oooOOO///^_^\\\OOOooo...
      0
  6. alexgate
     
    Salut, je suis nouveau sur le forum, voilà j'ai eMule 48a et je n'arrive pas à régler eMule avec mes ports TCP/UDP. Je suis en low ID et j'aimerais passer en high ID. Merci de votre part pour m'aider, s'il vous plaît, mon email est ***********. Merci.
    1
  7. nickt00 Posted messages 1 Status Member 1
     
    I’m quite good with computers, but I'm stuck with my ports configured through my Livebox. I should mention that it’s the Thomson Mini Livebox, and the configuration is a mess. I'm still getting a low ID. I changed my IP address, but doing so caused the internet to stop working (we have two PCs on Wi-Fi and one via Ethernet). I need help quickly.
    1
  8. OldBoy
     
    Another nobody dares to question the regulars. I have a livebox & on the Mule I remain on low ID. Is there a way to activate the TCP ports or something else to switch to high ID?
    Thanks in advance.
    0
    1. ebuy
       
      Most of the time, you need to change the default TCP and UDP ports to other port numbers.
      Operators detect the default ports and prevent High ID (this is the case with non-unbundled Free, for example).
      Then you need to open these ports in the box (redirect them to the IP address of the PC where the mule is, in case there are multiple PCs in your setup), also open them on any Firewall installed on this PC, and that's it...
      That's the logic.
      In practice, it varies with the ISPs and the different user configurations.
      0
      1. noisettine > ebuy
         
        I understand the principle of changing the ports and then coordinating them with the box and the possible firewall, but how is it done?
        0
    2. melanie 59
       
      Hi, I have a problem with eMule.
      My connection is very slow and even worse, my download speed.
      I have the new version eMule 0.48. I don't know what speed I'm running at because I don't know where to go to find out (I'm a beginner)
      Can someone help me ???????
      Thank you in advance.
      0
  9. wilfried
     
    Hi Melanie
    listen to me I found out how to solve the problem of opening ports on e-mule
    when you are on a server in the right window you can see if you are on LOW ID or HIGH ID,
    you need to switch to HIGH ID..
    if you want reply to me and I'll tell you how to do it
    good luck...oooOOO///^_^\\\OOOooo...
    Wilfried
    0
    1. moussa
       
      Hi Wilfried,
      I'm on LOW ID, how can I switch to HIGH ID??
      I have eMule version 48; I've been told that version 47 is better. What do you think?
      And what ports should I set??
      Thanks and have a good evening.
      0
    2. olilulau Posted messages 55 Status Member 1
       
      Hi Wilfried. I have the same problem as everyone else in this conversation. I have version 46 of eMule and I am on low ID with the live box. What should I do? I know I need to open the ports but I have no idea how to do that! Thanks!
      0
    3. nounous57
       
      Good evening, I can't activate the TCP UDP ports for eMule 0.49. I have the Freebox v.4 on Vista, my router is active, I did everything apparently, but it doesn't connect properly; it's yellow or red but not green. Thank you for the information.
      Please provide some details.
      0
  10. jerome
     
    Jérôme du 21, I can't find a good TCP and UDP port for eMule, I have a Livebox, can someone help me?
    0
  11. Verba
     
    Hello, for your ports, type your gateway address in the new page, click on advanced settings, then on firewall, click on NAT-based policy, there you will find the number of your Livebox Sagem ports.
    0
  12. pedro
     
    Hello,
    thank you so much for your advice!
    It’s a bit of a headache but with time we’ll get there!!! Thanks, you guys are the best!
    0
  13. Silk
     
    Hello,
    I have mediaserv and jariv but I can't configure it, it tells me there's a mapping problem to configure manually. I have eMule if anyone can help me :-(
    pleeeeeaaaaaaaaassssssssssseeeeeeeeeeeeeeeeeee
    0
    1. scr@t
       
      Hi

      I have mediaserv, you need to open the box ports.
      1) 198.168.1.1
      2) enter the password admin and admin
      3) network
      4) advanced settings
      5) server
      6) and you enter the emule ports.....
      7) save and it's all good


      Be careful because I think they also throttle the downloads.
      0
      1. silk > scr@t
         
        Tu ne peux pas me donner plus de détails parce que je suis débutant et que je n'ai rien compris à ce que tu m'as dit.
        0
      2. mrcool > scr@t
         
        Thank you for your response, it's clear.
        0
  14. Silk
     
    Hello,
    scr@t sorry, I didn't quite understand what you told me, could you explain it better please :s
    I want a more detailed explanation (with an image please if possible) for media serv 512k.
    0
  16. mirabeau
     
    For the Neuf Box and Free, remember to check in security: preferences-security-check enable protocol scrambling your ISP won't see that you're connecting your mule enjoy...
    0
  17. cjerome
     
    Good evening, why does eMule Plus tell me that I am not connected to any server? Can you help me? Thanks in advance.
    By the way, I have a Neuf Box and I am quite happy with it except for eMule.
    0
  18. Gothic_Bask
     
    Hi everyone!!

    I have the same problem as you, I'm using eMule 0.48 and Vista, and all of a sudden, I can't connect because the network is saturated and TCP connection is impossible. Please help me because I'm freaking out...

    Especially since my PC is new

    My email: Email address removed Moderation CCM

    Thank you very much ;-)
    0
  19. anais62 Posted messages 2 Status Member
     
    Good evening,

    I have a problem with eMule; I'm also on low ID, and I don't know what to enter to configure my Neuf Box in the NAT!!
    Could someone explain it to me???
    Thanks in advance.
    0
  20. ethan86 Posted messages 24 Status Member 1
     
    same problem for me on all the versions I know of eMule, they pull the same trick on me.
    At the time, I thought a triangle connection wouldn't be bad, but well, I only have an amd64 bit, thanks for replying to me.
    0
  21. ethan86 Posted messages 24 Status Member 1
     
    Here I am again, tell me how we could do this without it messing up.
    0
  • 1
  • 2