GN-2500 HD New Connection Problems Solved/Closed

Question

Salut, j'ai un démodulateur géant GN-2500 HD New que j'ai acheté il y a 3 jours, mais j'ai un gros problème : je veux décrypter les chaînes mais le démodulateur ne se connecte pas au modem.
J'ai même utilisé le Wi-Fi mais je ne sais pas comment faire pour décrypter les chaînes.

S'il vous plaît, aidez-moi, je vous en prie.

titane · Accepted Answer

Hello, it's very simple... Giant 2500 HD new... you need to update it

* download the update here (official Giant site): http://www.zinetsatdw.com/index.php/2-uncategorised/29-gn-250-2500-hd
* you need to download this:
GN-250/2500 HD (NEW REMOTE CONTROL) version 1.30

* in the demo menu select factory reset ----- select all

* unzip the file and insert it into a flash drive, then insert the flash drive into the demo, search for the file and click on OK (do not touch anything until the end).

restart the demo, then search for channels... then press F1 + 111 on the REMOTE CONTROL, a list will be displayed, select activate internet
in the menu --- Expansion ---- Wireless settings ---- connect to Wi-Fi connection

VERY IMPORTANT: AT THIS POINT, WE RECOMMEND THAT YOU SET

A PASSWORD FOR YOUR WIFI CONNECTION.

THEREFORE, YOU NEED TO ACCESS YOUR MODEM.

ONCE THE OPERATION IS COMPLETE, YOU WILL SEE THIS MESSAGE:

IP INFORMATION OBTAINED SUCCESSFULLY: 192.168.X.X

GO TO IP SETTINGS, YOU WILL SEE THAT DHCP: ON AND CONNECTED
in the end you'll find the channels are decrypted

(and excuse me for the level of French language)

gil · Answer

Reminder: no assistance because demodulator (terminal), piracy compatible, non-compliant with French legislation.

Legal HD demos labeled "legal" for making the right choice:

Fransat or Canal Ready or TV Orange or SFR Sat

+ television with common interface CI+ to integrated satellite tuner and certified Fransat or Viaccess CAM module.

idir · Answer

Hello,
I have practically the same one, the Geant HD88, it works very well.

Tell me, is your receiver connected to the router (modem)? Are you using DHCP or a static IP?

Which internet service provider are you using?

titane · Answer

Hello,
download the unpacked update file from this link:
http://filerio.in/q5752k8q0avi

*but before downloading, make sure your receiver is the 2500hd new because the latter comes with a black remote control and the old 2500hd has a gray remote control, so be careful..... the update I am providing is for the 2500hd new with the black remote.

after updating the receiver
*turn off the receiver from the power switch (back button)

*Reset all settings and restart. (factory reset)
and follow the other steps

search for channels...
after that look for channel JSC+4 or others as you wish in the void
press F1 + 111 on the REMOTE CONTROL
a list will display, select activate internet
in the menu --- Expansion ---- Wireless Settings---- connect with WiFi connection

VERY IMPORTANT: AT THIS STAGE WE RECOMMEND YOU TO SET

A PASSWORD FOR YOUR WIFI CONNECTION.

THEREFORE, IT IS NECESSARY TO ENTER YOUR MODEM.

ONCE THE OPERATION IS COMPLETE, YOU WILL RECEIVE THIS MESSAGE:

IP INFORMATION OBTAINED SUCCESSFULLY: 192.168.X.X

GO TO IP SETTINGS AND YOU WILL SEE THAT DHCP: ON AND CONNECTED
finally you will find the channels are decrypted

Abbes · Answer

Hello, it's very simple... Geant 2500 HD... you need the update

-1- Download the update here (official Geant site):
http://zinetsatdw.com/index.php/2-uncategorised/29-gn-250-2500-hd
N.B: you need to download:
GN-250/2500 HD (OLD REMOTE) latest version 1.33 from 13/11/2013:
GN2500_8M_2Tuner_V1.33.10501_20131113_HTKc7.rar
-2- Reset all settings and restart: In the demo menu select "factory default" ----- select all
-3- Extract the file and insert it into the flash disk then insert the flash into the demo and search for the file then click OK (do not touch anything until the BOOT is finished).
-4- After the demo update: turn off the receiver from the power switch (back button)
-5- When the demo restarts, look for the encrypted channels (TF1, JSC+4) ideal
To activate the GEANT 2500 HD server with V1.30 and above on the Internet via WIFI
-6- Press F1 + 111 on the REMOTE, a list appears, select activate internet
-7- In the menu --- Expansion ---- Wireless settings ---- connect with wifi connection
-8- Enter your WIFI connection password.
-9- Press F1 + 666 on the REMOTE to go directly to the SETTING window

-10- IP/URL LINE to go to server No. 40 one click with the volume down button on the remote

-11- SERVER TYPE LINE and set GSHARE2 server with the volume button on the remote

-12- CONFIRM LINE yes PRESS ok on the remote
Once the operation is completed you will receive this message:
INFORMATION: IP OBTAINED SUCCESSFULLY: 192.168.1.X
GO TO IP SETTINGS YOU WILL SEE THAT DHC: ON AND CONNECTED
and finally the channels are decrypted
To activate the GEANT 2500 HD server with V1.30 and above for satellite dish

-6- Press F1 + 111 on the REMOTE, a list appears, select SDS MODE
-7- The 2nd satellite dish for decryption must be oriented to:
Eutelsat W6 21.6 ° E
select frequency 11601 V symbol 02170
or
Atlantic Bird 1 at 12.5 ° W
select frequency 11407 V symbol 27500

-8- Connect the cable to the satellite B input of the decoder (2nd satellite dish for decryption)
-9- Go to the installation menu and search for the connected satellite then on the 3rd line put B instead of A
-10- To receive multiple satellites at once: Use a DYSAK for 2 or more satellites (Astra, Hotbird,...) to connect 1 cable to input A
-11- Go to the installation menu and search for the connected satellite (Astra, Hotbird,...) without forgetting to choose on the 5th line the LNB number for the connection on the DAYZAK (if Astra is connected to No. 1 put LNB1 and if Hotbird is on No. 2 put Hotbird LNB2...) then ok on blind search for the satellites.
HAVE A GOOD USE

GN-2500 HD New Connection Problems

5 réponses

Samsung j5 unable to answer

Scam of the suvedene highway

Minecraft restore the cursor and the bar.

My ps3 keeps shutting down on its own...

Samsung series 4 led tv logo display...

How to enable bluetooth on a samsung tv?

Ctrl key issue

[metin2] sura ...

Freebox tv locked step 2 or network

Error 46 (brother dcp-150c) cleaning impossible