Giant Electronic Gn-2500 Hd Issue
Closed
Hello,
my father brought back a Geant Electronics GN-2500HD decoder from Algeria (apparently flashed and tested in store), but unfortunately we can't get it to work as we live in Haute-Savoie.
I have connected the Ethernet cable, but I read on the forum that I needed to press F1-111 to activate it; the only problem is that there is no F1 button on the remote control, what should we do?
If someone could help us configure it with diagrams of the settings, etc., it would be really kind.
Thank you in advance, Hakim
my father brought back a Geant Electronics GN-2500HD decoder from Algeria (apparently flashed and tested in store), but unfortunately we can't get it to work as we live in Haute-Savoie.
I have connected the Ethernet cable, but I read on the forum that I needed to press F1-111 to activate it; the only problem is that there is no F1 button on the remote control, what should we do?
If someone could help us configure it with diagrams of the settings, etc., it would be really kind.
Thank you in advance, Hakim
11 réponses
It's very simple ... Geant 2500 HD ... with the update
-1- Download the update here (official Geant site):
http://zinetsatdw.com/index.php/2-uncategorised/29-gn-250-2500-hd
N.B: you need to download:
GN-250/2500 HD (OLD REMOTE CONTROL) latest version 1.33 from 11/13/2013:
GN2500_8M_2Tuner_V1.33.10501_20131113_HTKc7.rar
-2- Reset all settings and restart: In the demo menu select "factory default" ----- select all
-3- Unzip the file and insert it into the flash disk, then insert the flash into the demo and search for the file, then click OK (do not touch anything until the end of the BOOT).
-4- After the demo update: turn off the receiver from the power switch (back button)
-5- When the demo restarts, look for encrypted channels (TF1, JSC+4) ideal
To activate the GEANT 2500 HD server with V1.30 and higher over the Internet with WIFI
-6- Press F1 +111 on the REMOTE CONTROL, a list appears, select activate internet
-7- In the menu --- Expansion ---- Wireless settings ---- connect with wifi connection
-8- Enter your WIFI connection password.
-9- Press F1+666 on the REMOTE CONTROL to go directly to the SETTING window
-10- IP/URL LINE to go to server N°40 one click with the volume down button on the remote
-11- SERVER TYPE LINE and set server GSHARE2 with the volume button on the remote
-12- CONFIRM LINE yes PRESS ok on the remote
Once the operation is complete you will see this message:
INFORMATION: IP OBTAINED SUCCESSFULLY: 192.168.1.X
GO TO IP PARAMETER YOU WILL SEE THAT THE DHC: ON AND CONNECTED
and in the end the channels are decrypted
To activate the GEANT 2500 HD server with V1.30 and higher for satellite dish
-6- Press F1 +111 on the REMOTE CONTROL, a list appears, select SDS MODE
-7- the 2nd satellite for decryption must be oriented at:
Eutelsat W6 21.6 ° E
select the frequency 11601 V symbol 02170
or
Atlantique Bird 1 at 12.5 ° W
select the frequency 11407 V symbol 27500
-8- Connect the cable to the satellite input B of the decoder (2nd satellite for decryption)
-9- Go to the installation menu and search for the connected satellite, then on the 3rd line put B instead of A
-10- To receive multiple satellites at once: Use a DAYSAK (Switcher) for 2 satellites or more (Astra, Hotbird,...) to connect 1 cable to input A
-11- Go to the installation menu and search for the connected satellite (Astra, Hotbird,...) without forgetting to select on the 5th line the LNB number for the connection on the DAYZAK (if Astra is connected to No. 1, put LNB1 and if Hotbird is on No. 2, put Hotbird LNB2...) then ok on blind search for the satellites.
HAVE A GOOD USE
-1- Download the update here (official Geant site):
http://zinetsatdw.com/index.php/2-uncategorised/29-gn-250-2500-hd
N.B: you need to download:
GN-250/2500 HD (OLD REMOTE CONTROL) latest version 1.33 from 11/13/2013:
GN2500_8M_2Tuner_V1.33.10501_20131113_HTKc7.rar
-2- Reset all settings and restart: In the demo menu select "factory default" ----- select all
-3- Unzip the file and insert it into the flash disk, then insert the flash into the demo and search for the file, then click OK (do not touch anything until the end of the BOOT).
-4- After the demo update: turn off the receiver from the power switch (back button)
-5- When the demo restarts, look for encrypted channels (TF1, JSC+4) ideal
To activate the GEANT 2500 HD server with V1.30 and higher over the Internet with WIFI
-6- Press F1 +111 on the REMOTE CONTROL, a list appears, select activate internet
-7- In the menu --- Expansion ---- Wireless settings ---- connect with wifi connection
-8- Enter your WIFI connection password.
-9- Press F1+666 on the REMOTE CONTROL to go directly to the SETTING window
-10- IP/URL LINE to go to server N°40 one click with the volume down button on the remote
-11- SERVER TYPE LINE and set server GSHARE2 with the volume button on the remote
-12- CONFIRM LINE yes PRESS ok on the remote
Once the operation is complete you will see this message:
INFORMATION: IP OBTAINED SUCCESSFULLY: 192.168.1.X
GO TO IP PARAMETER YOU WILL SEE THAT THE DHC: ON AND CONNECTED
and in the end the channels are decrypted
To activate the GEANT 2500 HD server with V1.30 and higher for satellite dish
-6- Press F1 +111 on the REMOTE CONTROL, a list appears, select SDS MODE
-7- the 2nd satellite for decryption must be oriented at:
Eutelsat W6 21.6 ° E
select the frequency 11601 V symbol 02170
or
Atlantique Bird 1 at 12.5 ° W
select the frequency 11407 V symbol 27500
-8- Connect the cable to the satellite input B of the decoder (2nd satellite for decryption)
-9- Go to the installation menu and search for the connected satellite, then on the 3rd line put B instead of A
-10- To receive multiple satellites at once: Use a DAYSAK (Switcher) for 2 satellites or more (Astra, Hotbird,...) to connect 1 cable to input A
-11- Go to the installation menu and search for the connected satellite (Astra, Hotbird,...) without forgetting to select on the 5th line the LNB number for the connection on the DAYZAK (if Astra is connected to No. 1, put LNB1 and if Hotbird is on No. 2, put Hotbird LNB2...) then ok on blind search for the satellites.
HAVE A GOOD USE
yanisyanis15
Press the page up key because F1 is replaced by this action.
