View original (French)

Universal remote need help

mini -  
NIIIIIIICO Posted messages 1 Status Member -
Je cherche de l'aide pour une télécommande universelle. J'arrive à l'utiliser pour la TV et le magnétoscope, mais pas pour mon DVD. Je ne sais pas sur quel programme me mettre : TV1, TV2, VCR ? De l'aide, s'il vous plaît. Je cherche également le bouton 0 car il n'y en a pas, il y a juste 10/0. Quelqu'un sait-il ? Merci d'avance. 
Configuration: Windows XP Internet Explorer 6.0

12 answers

Answer 1 / 12
mini
 
Thank you JMP, I will go check the site. My remote control is a 25629, yes it's a sub-brand. I don’t see any other details except 10 in 1. Thanks again for your response.
24
Answer 2 / 12
zx8182 Posted messages 3 Status Member 4
 
Hello.

I came across this "thread" because I'm also trying to get a universal remote 25629 to work. There is no brand or any other reference. The two batteries (AAA) are from the brand "ANDALI".
I haven't been able to get any of the devices (TV, VCR, etc...) to work. I didn't pay much for it (2 Euros on sale!) but it would be very useful for me.

Thanks in advance.
Zx81

P.S: I had a good laugh when I went to the site suggested by JMP59.
4
typo77 Posted messages 6 Status Member
 
Hello.
I own a remote control 25629 (the only apparent reference) that was given to me with a TNT adapter Tonna TD1000.
Unfortunately, I don't have the documentation for this remote control and I don't know the codes necessary to operate this adapter.
If you have the documentation for this remote control, would it be possible for you to send it to me by email?
Or better yet, could you send me a copy of the documentation for this remote control?
Thank you in advance...
-1
zx8182 Posted messages 3 Status Member 4 > typo77 Posted messages 6 Status Member
 
Hello.

I can only reply to you what I said in September:

Hello.

I came across this "thread" because I am also looking to make a universal remote control 25629 work. There is no brand or other reference. The two batteries (AAA) are from the brand "ANDALI".
I haven't been able to make any of the devices (TV, VCR, etc...) work. I didn't pay much for it (2 Euros on sale!) But it would be really helpful.

Thanks in advance.
Zx81

Unfortunately, I don't know more! :o(
-1
typo77 > zx8182 Posted messages 3 Status Member
 
Hello and thank you for getting back to me.
So I will continue my search for that famous document.
I hope this remote control is compatible with the TNT adapter Tonna TD1000.
I still have the option of trying all 1000 possible codes (000 to 999).
A rather tedious solution...
Or finding a second-hand adapter of the same type, because once the channels are downloaded, you can control it manually.
If anyone has a solution, I would be grateful if they could share it with me.
Thanks again to those who replied...
0
Answer 3 / 12
jmp59 Posted messages 29286 Registration date   Status Contributor Last intervention   6 349
 
With this, nothing to find. Let's try to do some guessing.

Classic remote or touchscreen?
What is on the device selection buttons other than tv1, tv2, vcr?

When on tv1 with your TV on, if you press the 10/0 button, does anything appear on the screen?
0
Answer 4 / 12
odris Posted messages 157 Status Member 29
 
Hello
Can you tell us the brand of your remote control as well as the serial number and, if possible, an image of the remote control
try to find the manufacturer's website
then FAQ
0
Answer 5 / 12
typo77
 
Hello.
I am looking for the documentation to program the remote control 25629 that was given to me with a TNT adapter
Tonna TD 1000 (for which I also do not have the documentation).
Did you get a response to your request or did you find a solution?
Thank you for replying...
0
Answer 6 / 12
lulu72
 
Hello, today I also got a universal remote 25629 but I can't get the devices to work. I managed to turn up the volume once and turn off the TV twice. Can someone help me? I tried as it says on the paper (set + TV1 to turn on together, then I release, press set, the LED blinks, then press power long and the TV turns off).
Is there anyone who knows about this?
0
typo77
 
Hello.
Regarding your question, the procedure you're explaining is that of automatic programming...
You need to finish the procedure by immediately pressing the button of the device you selected at the beginning to validate the automatically found code.
Then, you need to check if you can control the device normally. If not, further research is required.
The procedure will have to be repeated for each device you want to control with this device...
Of course, it is quicker to try the codes provided in the documentation that is attached to the remote control...
As for me, I do not have this document and am looking for it...
I have a Tonna TD1000 adapter that I would like to control with this remote 25629.
If you have this documentation, I would appreciate it if you could scan it and send it to me via the internet.
Or, if not, please provide me with the codes for my adapter.
Thank you for your response and good luck...
0
Answer 7 / 12
typo77
 
Thank you for replying to me.
As I explained in my message, I have a remote control 25629 for which I do not have the documentation with the necessary codes to control a TonneTD100 adapter.
It is this document that I am looking for, or, failing that, the various codes provided for this adapter.
Regarding your device, I think that the 0/10 button should be used to program 0 in programming mode and 10 in channel display control mode (to be verified).
If you have this information (or better, if you can send me a copy of your document), I would be grateful if you could send it to me.
Thank you in advance...
0
Answer 8 / 12
zx8182 Posted messages 3 Status Member 4
 
Hello.
I didn't receive a manual in the packaging. A simple sheet said to refer to the code (corresponding to the device we wanted to control) on page 24 (if I remember correctly), but there wasn't a manual, unfortunately. So no page 24.
Sorry! :o(
0
Answer 9 / 12
lolman61
 
Good evening
I just recovered this remote control and it doesn’t work at all with a brand TV (Thomson code)
I have the booklet
press SET
keep it pressed and then press TV1
the LED will light up and then turn off, release the button
enter the code
if it’s correct the LED will turn off, otherwise it will flash twice

and well, this thing doesn’t work, what a piece of crap...
0
doudounette
 
You should have scanned the book, or at least the code.
0
Answer 10 / 12
Ramza
 
The code for my remote is 1234. I enter it after setting it to tv1, the light stays on and I enter my code, there it works.
0
jmp59 Posted messages 29286 Registration date   Status Contributor Last intervention   6 349
 
It's great your thing! But you must not have the same remote control as me because for it, it's not working.
0
Answer 11 / 12
j'ycomprenrien Posted messages 74 Status Member 4
 
Good evening

I have a remote control without a brand 25629...

I've been searching for 2 hours and trying everything that's been suggested to make a Tokai TV work => I have the codes and everything, but nothing works...

Question: Do you need to have done advanced math or something to understand how to get the remote control to work?!

A little humor, otherwise?!

Thank you very much for your help
0
NIIIIIIICO Posted messages 1 Status Member
 
Where can I find the code, please?
0
Answer 12 / 12
jmp59 Posted messages 29286 Registration date   Status Contributor Last intervention   6 349
 
HELLO !

Start by going to http://www.technicland.com/malpolitus.php3

Then check what is written on your remote control, because there are hundreds of different models and to be able to try to help you, it is necessary to know which one you have.
Then come back here and let us know what you find.

It's only with this information that we can see if we can help you.

Bye
-1
LG59
 
virus !!!
0