Zappin universal remote control manual

Solved
vullion -  
 spoutnik -
Hello,
I am looking for the manual for my universal remote Zapping multinuméric or at least the codes for Toshiba TV and VCR, Litéon DVD, Twinner decoder.
The most urgent is the Litéon DVD burner/reader.
Thank you in advance.

Thierry
Configuration: XP

4 réponses

al101fr
 
User manual downloadable here on my site: http://al101fr.free.fr/...

I'm looking for the numerical codes that go with it. Remind me in a while if possible.
al101fr@yahoo.fr
4
spoutnik
 
Thank you for the manual.
0
ela.gdm
 
Hi, did you receive a response or find out how to configure it? I'm in the same situation. Please let me know if you received or found a solution.
1
catoch
 
Hello, I have the same problem as you
I have a universal remote Zapping Multinuméric and I don't have the codes for a Grandin
Have you received any news regarding your message and if possible could you send me the Grandin section by email
Thank you in advance
Catoch
0
gdemio
 
On the numeric zapping I don't have Grandin, but I do have a Oneforall list and for Grandin TV I have 0037;0556 0009;0163 0610 0714 0715 0668 0374 0320 0282 0218 0455 0579
as shown on the zapping the codes are in three digits, remove the 0 and then just test.
see you+
0
jmp59 Posted messages 29288 Registration date   Status Contributeur Last intervention   6 349
 
Hi Gdemia,

Have you checked that for a brand (Philips for example), the codes given by numeric zapping and Allforone were the same (apart from the zero)?
It's not impossible, but it's highly unlikely.

I think that in your manual, there must be a "magic code" method that allows you to find the code of the device that is in front of the remote control. It would be interesting to share this method.

Bye.
0
gdemio
 
No, I just got my hands on the manual and I haven't had time to conduct any tests yet.
For the code via global search
to turn on the TV or other, press and release the ?code button (you have 5 seconds to start the search), press and hold the standby button (during the search the light blinks, this can last up to 25 minutes), release as soon as the television turns off. The remote has memorized a code. If it works, you just need to check the memorized code; otherwise, start again. 5 brief blinks of the light indicate the end of the search cycle.

To see the memorized code
press the device selection button (TV), then press and hold the shift button and the code button, and release both.
Watch the light
the numbers are identified by blinking: 1 brief = 1; 2 brief = 2; ... 1 long = 0.
Pause between each number
the codes are indeed 4 digits and not 3 as indicated in the previous post
normally you can also call Visa France at 0467271569
there you go, see you later!
0
lecantalien
 
Hello
If you have the manual for the code (and what you detail above works), you must have the rest: how to program the channels? That's what I'm missing. Could you scan the manual and send it to me: jmtrouillet@orange.fr
Thank you very much in advance.
0