View original (French)

No sound on DVD player via HDMI

Olive -  
olbar Posted messages 3 Status Member -
Hello,

I have a DVD player "THOMSON DVD120H" which, when connected via HDMI to my television "SAMSUNG PS43E490B1WXZF", does not produce sound.

I have unsuccessfully tested both HDMI ports on my TV as well as all three HDMI 1.4 cables I have.

The HDMI ports on my television and my cables are functioning since they are fully used by my Neufbox TV and my laptop.

The HDMI connection of my DVD player works because when it is connected to my computer screen "IIYAMA prolite B2475HDS", the sound works.

I have tested the various settings on both the player and the television. Nevertheless, I think the issue must come from the settings on one of the two devices or some strange incompatibility.

I have made both manuals available on my "neufgiga" by following the link below.

http://www.neufgiga.com/index.php?m=c9ae77e8&a=dc18f91e&share=LNK707950d1cc84adda1

Thank you for your help

Olivier

2 answers

  1.
    stewartia Posted messages 12469 Status Member 2 936
     
    Convert the audio from the DVD player to PCM or stereo.
    0
  2. olbar Posted messages 3 Status Member
     
    Thank you, Stewartia, for your quick response.

    My player was already set to PCM in "audio output" and stereo in "Speaker settings".

    Here are the different audio options available on my DVD player:

    1/ Audio Settings
    1A/------------------ Audio Output: SPDIF/Off, SPDIF/RAW, and SPDIF/PCM
    1B/------------------ Key: a scale from flat to sharp

    2/ Speaker Settings
    2A/------------------ Mixed Mode: LT/RT, Stereo, and USS

    3/ Digital Settings
    3A------------------ Mode op: Audio Output and MEF
    3B------------------ Dynamic: a scale from 1 to 8
    3B------------------ G+D: Stereo, Mono Left, Mono Right, and Mixed Mono

    Thank you again for your help.

    Olivier
    0