View original (French)

Problem with TSX NANO PLC

FABRICE -  
 Sebnormand -
Hello,

On a TSX NANO PLC, the RED I/O LED (Inputs/Outputs) is flashing. The other three LEDs are off. What should I do to get my PLC back to run?

Configuration: Windows 7 / Internet Explorer 8.0

1 answer

  1. Sebnormand
     
    It's because your robot doesn't have a valid program in its memory.
    Reinsert the program.
    You can then put it in Run mode.
    Sebnormand
    0