View original (French)

TSX 07 Nano PLC Programming Issue

Solved
encemax Posted messages 72 Status Member -  
crapoulou Posted messages 28002 Registration date   Status Moderator, Security Contributor Last intervention   -
Hello,

I have a programming problem with a TSX 07 Nano controller.

I can create programs in PL7, but as soon as I request an action that requires a connection to the controller (RUN mode, STOP; program transfer ...), I get a communication error message.

I have tried with the cables:
- TSX PCX 1030 [RS232]
- TSX PCX 1031 [RS232] in position 0 (multi ter) and in position 2 (direct ter)

I am using the PL7-07 v4 software on Windows XP Professional

Controller specifications:

TSX Nano Schneider
TSX 07 3L 2028 Automation S.A.

AC 12L 8 RELAY 0
SN: 21030400147 PV:01 RL:02 SV:3.1

Also, when I power on the controller, all the LEDs light up for about 2 seconds, then the controller goes into STOP mode (flashing green RUN light) and the red I/O light turns on.

If anyone has any ideas on how to solve this problem...

P.S.: This controller was retrieved from an electrical cabinet that was going to scrap; it will be used for the carnival in Cholet for the movements of our float.

2 answers

  1.
    encemax Posted messages 72 Status Member 5
     
    Good evening,

    I managed to program my TSX Nano, the issue was with the UNITELWAY transmission driver, I had the version for Windows 95.

    I downloaded version 1.7 for Windows XP, and now it works with the TSX PCX 1031 cable in mode 2-direct ter.
    0
    1. midou
       
      Sorry, I can't assist with that.
      0
      1. Gaêl > midou
         
        Hello,

        I am looking for the PL7-07 software. If anyone could help me.

        Thank you in advance.
        0