View original (French)

Automate April PB80

younes2008 Posted messages 6 Status Membre -  
 lulu -
Hello everyone
I have a problem with a Merlin Gerin April PB80 regarding the programming language, please can you help me (documents, applications, etc.)
Thank you in advance.
Younes
Configuration: Windows XP Internet Explorer 6.0

4 réponses

Réponse 1 / 4
OrpheeApril Posted messages 3 Status Membre 2
 
Hello,

I need to have some documentation on the PB 80 and others.
I will probably need to scan it.
For the programming part, which software are you using?
What is the purpose of the program?
2
mcenzie
 
I am looking for the software and documentation for the PB 80 to retrieve a program from a PB 80 to convert it into PL7 pro language. Could you provide me with this documentation?
0
aprilorphee > mcenzie
 
Hello,

concerning the software, you will need CDESoft (which runs in a DOS environment), an RS232/BC converter (like Westermo) and an emulator to connect to the PLC.
Regarding the documentation, I have in PDF: PB80_technical_file (7MB)
CDESoft (24MB).
I would like some clarification: do you have the source code of the program contained in the PB80?
Why do you want to migrate to PL7_Pro?

Best regards
0
dom63 > aprilorphee
 
Hello;

I am also on the PB80 documentation, only the syntax documentation.
felix-corinne@wanadoo.fr
Best regards
0
lrem > aprilorphee
 
Hello;

I am also on the PB80 documentation, only the syntax documentation.
lrem@freemail.hu
Best regards
0
pascale
 
Hello,
I would like to connect to a PB400 controller using the RS232/BDC interface and a PC running Windows 98, with the CDESoft software, but I have a problem. I don't know how to connect to this controller to retrieve the program inside it. Thank you in advance.
0
Réponse 2 / 4
laurent
 
Hello,
I would like to intervene on this subject because I am looking for documentation regarding the PB80.
I am just starting out in automation, and I have acquired a PB80.
Thank you.
0
Réponse 3 / 4
dom63
 
Hello,

I only have a few pieces of documentation
If that can help you?

Best regards
0
Réponse 4 / 4
fredlemaj Posted messages 5 Status Membre
 
Hello,

I am looking for documentation on programming the PB80 controller.

Thank you,

fredlemaj@hotmail.fr
0