J'aurais besoin que quelqu'un m'aide à comprendre l'analyse SMART si dessous car j'ai l'impression que mon disque dur est en train de rendre l'âme (mon windows freeze quand j'essaye d'accéder à certains dossiers et lorsque cela arrive j'entends le hdd faire des grattements bizzares...):
root@PartedMagic:~# smartctl -a /dev/sda
smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, https://www.smartmontools.org/
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K250 series
Device Model: Hitachi HTS542525K9SA00
Serial Number: 080807BB6F00WDF66HKG
Firmware Version: BBFOC31P
User Capacity: 250,059,350,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3f
Local Time is: Tue Nov 9 23:36:38 2010 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 107) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 227 227 033 Pre-fail Always - 0
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 1818
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 096 096 000 Old_age Always - 1788
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1695
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 420
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 4928
194 Temperature_Celsius 0x0002 110 110 000 Old_age Always - 50 (Lifetime Min/Max 15/60)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 76
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 41
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 16403 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 16403 occurred at disk power-on lifetime: 1766 hours (73 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 29 ff 69 33 42 Error: UNC 41 sectors at LBA = 0x023369ff = 36923903
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 a8 69 33 40 00 00:12:07.800 READ DMA EXT
25 00 80 a8 69 33 40 00 00:12:02.700 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:58.600 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:53.400 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:48.300 READ DMA EXT
Error 16402 occurred at disk power-on lifetime: 1766 hours (73 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 29 ff 69 33 42 Error: UNC 41 sectors at LBA = 0x023369ff = 36923903
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 a8 69 33 40 00 00:12:02.700 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:58.600 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:53.400 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:48.300 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:43.200 READ DMA EXT
Error 16401 occurred at disk power-on lifetime: 1766 hours (73 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 21 ff 69 33 42 Error: UNC 33 sectors at LBA = 0x023369ff = 36923903
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 a0 69 33 40 00 00:11:58.600 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:53.400 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:48.300 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:43.200 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:38.000 READ DMA EXT
Error 16400 occurred at disk power-on lifetime: 1766 hours (73 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 21 ff 69 33 42 Error: UNC 33 sectors at LBA = 0x023369ff = 36923903
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 a0 69 33 40 00 00:11:53.400 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:48.300 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:43.200 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:38.000 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:32.900 READ DMA EXT
Error 16399 occurred at disk power-on lifetime: 1766 hours (73 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 21 ff 69 33 42 Error: UNC 33 sectors at LBA = 0x023369ff = 36923903
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 a0 69 33 40 00 00:11:48.300 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:43.200 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:38.000 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:32.900 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:27.800 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 60% 1786 109549
# 2 Short offline Completed: read failure 70% 1785 109549
# 3 Short offline Completed: read failure 60% 1785 109549
# 4 Extended offline Completed: read failure 90% 1785 109549
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Bon faute de réponse, j'ai continué à faire mes propres tests.
Sur un ancien disque dur que je sais HS, j'ai lancé une analyse SMART.
Et sur la ligne:
SMART overall-health self-assessment test result: PASSED
J'ai à la place:
SMART overall-health self-assessment test result: FAILLED
J'ai ensuite fait l'analyse sur un disque dur que je sais en bon état de fonctionnement.
J'ai quasi le même rapport que sur mon disque dur Hitachi à la différence qu'il n'y a pas toutes les parties de ce genre:
Error 16399 occurred at disk power-on lifetime: 1766 hours (73 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 21 ff 69 33 42 Error: UNC 33 sectors at LBA = 0x023369ff = 36923903
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 a0 69 33 40 00 00:11:48.300 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:43.200 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:38.000 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:32.900 READ DMA EXT
25 00 80 a0 69 33 40 00 00:11:27.800 READ DMA EXT
Alors que cela veut-il dire? Faut-il que je change mon disque dur?
Merci de me répondre avant demain ce coup si car comme je vais faire des courses du côté de mon magasin d'info demain qui est assez loin de chez moi, s'il faut que je le change autant faire d'une pierre deux coup ;).
Trouvez des réponses à vos questions sur les composants, les périphériques et les astuces d'assemblage. Partagez vos expériences et connectez-vous avec d'autres passionnés de technologie pour optimiser votre configuration informatique.
