TSX 07 Nano PLC Programming Issue
Solved
encemax
Posted messages
72
Status
Membre
-
crapoulou Posted messages 28002 Registration date Status Modérateur, Contributeur sécurité Last intervention -
crapoulou Posted messages 28002 Registration date Status Modérateur, Contributeur sécurité Last intervention -
Hello,
I have a programming problem with a TSX 07 Nano controller.
I can create programs in PL7, but as soon as I request an action that requires a connection to the controller (RUN mode, STOP; program transfer ...), I get a communication error message.
I have tried with the cables:
- TSX PCX 1030 [RS232]
- TSX PCX 1031 [RS232] in position 0 (multi ter) and in position 2 (direct ter)
I am using the PL7-07 v4 software on Windows XP Professional
Controller specifications:
TSX Nano Schneider
TSX 07 3L 2028 Automation S.A.
AC 12L 8 RELAY 0
SN: 21030400147 PV:01 RL:02 SV:3.1
Also, when I power on the controller, all the LEDs light up for about 2 seconds, then the controller goes into STOP mode (flashing green RUN light) and the red I/O light turns on.
If anyone has any ideas on how to solve this problem...
P.S.: This controller was retrieved from an electrical cabinet that was going to scrap; it will be used for the carnival in Cholet for the movements of our float.
I have a programming problem with a TSX 07 Nano controller.
I can create programs in PL7, but as soon as I request an action that requires a connection to the controller (RUN mode, STOP; program transfer ...), I get a communication error message.
I have tried with the cables:
- TSX PCX 1030 [RS232]
- TSX PCX 1031 [RS232] in position 0 (multi ter) and in position 2 (direct ter)
I am using the PL7-07 v4 software on Windows XP Professional
Controller specifications:
TSX Nano Schneider
TSX 07 3L 2028 Automation S.A.
AC 12L 8 RELAY 0
SN: 21030400147 PV:01 RL:02 SV:3.1
Also, when I power on the controller, all the LEDs light up for about 2 seconds, then the controller goes into STOP mode (flashing green RUN light) and the red I/O light turns on.
If anyone has any ideas on how to solve this problem...
P.S.: This controller was retrieved from an electrical cabinet that was going to scrap; it will be used for the carnival in Cholet for the movements of our float.
2 réponses
Good evening,
Thank you for coming back with the answer.
This could help someone else in the future facing the same problem.
To mark a topic as [Resolved]:
https://www.commentcamarche.net/infos/25917-marquer-un-fil-de-discussion-comme-etant-resolu/
Thank you and best wishes.
Crapoulou.
--
Do you shoot or do you aim?
Thank you for coming back with the answer.
This could help someone else in the future facing the same problem.
To mark a topic as [Resolved]:
https://www.commentcamarche.net/infos/25917-marquer-un-fil-de-discussion-comme-etant-resolu/
Thank you and best wishes.
Crapoulou.
--
Do you shoot or do you aim?
I am looking for the PL7-07 software. If anyone could help me.
Thank you in advance.
Unfortunately, you have to pay to obtain it (see Schneider).
https://www.se.com/fr/fr/faqs/FA16578/