Razer Mako Speakers (cutout)
Solved
Thurock
Posted messages
8
Status
Member
-
loik66 -
loik66 -
Hello,
I have a problem with my Razer Mako speakers, which, since I got them, sometimes cut off at the end of a song or in the middle of a movie, well, when there is sound coming out actually, followed by unpleasant sound bursts that are quite irritating to the ears, and after a few minutes of mayhem, the sound returns.
Anyway, I'm calling on you and your expertise, please! ;)
Information:
-Windows 7
-Integrated sound card on the motherboard (P5Q Pro)
-Speakers: Razer Mako 2.1
I have a problem with my Razer Mako speakers, which, since I got them, sometimes cut off at the end of a song or in the middle of a movie, well, when there is sound coming out actually, followed by unpleasant sound bursts that are quite irritating to the ears, and after a few minutes of mayhem, the sound returns.
Anyway, I'm calling on you and your expertise, please! ;)
Information:
-Windows 7
-Integrated sound card on the motherboard (P5Q Pro)
-Speakers: Razer Mako 2.1
10 answers
-
If another kit doesn't cause you any problems, then there is very likely an issue with a loose connection in the Mako kit cables!
--
Because the manuals don't tell you everything...
But they don't tell you nothing either, right! -
"So it's indeed a contact issue, but how can I fix this?"
Customer Service... and if out of warranty, locate the faulty contact and repair accordingly. (this may involve disassembling and replacing the stereo Jack cable!)
--
Because manuals don't say everything...
But they don't leave anything out either, right! -
The problem is probably not with the speakers, but with the sound card...
Have you tested the kit on another audio source?
--
Because the manuals don't say everything...
But not nothing either, right! -
I also asked myself the question, I will test it on my iPod. (note: with my old Logitech 5.1 speakers, I don't have this issue). Thank you. :)
-
Yes indeed, I tested my speakers on another PC, and I have the same issue. So it is indeed a contact problem, but how can I fix this?
-
-
What happened to you?
I have the same issue, I’m disgusted!
Help?
Customer service? What did it say? -
uhhh same for me for 5 days !!!!!
Customer Service ??????? -
To respond to I don't remember which comment, it doesn't come from the sound card, but from the kit.
If we plug a headset into the remote control, it works; as soon as we unplug it, the sound should go back to the speakers, but nothing!
A problem between the sub and the speakers, or between the remote control and the sub! -
A simple yet effective solution: buy touch gloves (€5) and a clamp-type vice grip. Place the touch part of the glove on the volume you want and tighten it a bit with the clamp; the speakers will think you're adjusting the volume, so they won't enter standby mode and will no longer turn off. There you go!