View original (French)

Agfa XP Scanner Drivers (Snapscan 310)

Vimedj -  
I am looking for a driver for an Agfa scanner, Model SnapScan 310
on Windows XP Pro.
I have already tried Photo Look and Scanwise, which do not work.
Thank you for your help.

28 answers

  1. cavell59
    Go to the publisher's or manufacturer's website where you will find all the drivers, or on the site touslesdrivers.com.
    0
    1. HARNELBE
      You just need to go to this address, I also struggled to find it a long time ago, and it seems they have made an effort at Agfa to make the drivers more accessible.
      In fact, you just need to install ScanWise and there you go :D

      http://www.agfa.com/digicam_scanner_drivers/scanner/snapscan_310s/

      Don't hesitate to write to me if it doesn't work.
      1
      1. allezletfc.net
        I have the same problem since I switched to XP.
        I followed your instructions and installed the 2000 driver. The device is properly installed, recognized in the peripherals, the driver is good, but when I launch Snapwise, it asks me to connect or turn on the scanner, which I do, but it does not appear in the list to be able to select it.
        The same happens if I try with Photoshop.
        Thank you for helping me.
        0
      2. Prince Diarra
        Hello, thank you for the driver for the Snapscan 1212u. In fact, I also struggled because of this driver and now everything is finally sorted out. I thank you again for the link.
        Feel free to ask me if you have any issues with certain software; I will gladly help you with anything I can. Thank you.
        0
      3. Fred*
        Thank you for the response, I haven't been on the site in a long time!
        I will try, but the problem is that it needs to work with XP and the connection (card) scanner/PC!
        Best regards.
        0
    2. harnelbe
      How do you use your scanner?
      Which software do you use to scan?
      Have you installed the latest version of Scanwise?
      0
      1. Kiki
        I normally use the scanner, it is correctly connected as it works under 98.
        I downloaded the 2 software available from the Agfa link above (the latest version of ScanWise and PhotoLook), but neither of the two software recognizes the scanner!
        What should I do?
        0
      2. Martin
        @KikiHello,
        I have the same problem, a parallel port is impossible to get working!!!
        HELP!
        0
      3. HARNELBE
        @KikiDon't forget to download only a ScanWise version that corresponds to your scanner model. Parallel or SCSI...
        0
    3. HARNELBE
      Is it a scanner on a parallel port or on a SCSI port?
      0
      2. Kiki
        parallel port for me too
        what is the right shortcut for scanwise?
        0
        1. HARNELBE
          For scanners with Parallel Port under Windows XP:
          Here is the comment that one can find:
          This type of scanner does not work under XP. Agfa will not make XP drivers in the future either as it stopped its desktop scanner and digital camera business in September 2001.

          You should have bought a Snapscan 310 with SCSI port :D

          Sorry.
          0
          1. kiki
            The nuuuuuuuuuuuuuls!
            I'm going to have to throw the scanner away, isn't there a programmer who could do something for me?!
            0
            1. spane killer
              Je suis désolé, mais je ne peux pas vous aider avec ça.
              0
              1. rf46pc63
                I would like to download Scan Wise for Windows XP and the Agfa Snap Scan 310 scanner.
                0
            3. ichen
              hello, please I ask for scanner drivers agfa under 98 (snapsca 310) thank you.
              0
              1. harnelbe
                I think that if you read the messages in full, you could find that link by yourself :) right?
                0
                1. peps Contributor
                  Hello,
                  I am looking for a SCSI card compatible with this type of scanner, which brand and model should I search for on eBay, please?
                  Notes: A PCI port card only, the one provided was ISA, and I do not have any ports of that type.
                  0
                  1. Zorg
                    Hello,

                    Buying a PCI SCSI card, thus with a SCSI II connector of 50 or 68 pins, plus the SCSI II / DB25 connection cable is more expensive than buying a current USB scanner.
                    0
                3. Fred50
                  To install the snapscan 310P on XP:

                  http://scandriver.site.voila.fr/

                  You will find a detailed method tested on several configurations.

                  Fred 50.
                  0
                  1. Bernard
                    Hello,

                    I would have liked to try what you propose in this link (I just installed XP and I'm eager to use my SnapScan 310), unfortunately, with a year gap the link is dead.
                    Is there any way to access it otherwise?
                    Thank you in advance.
                    Bernard
                    0
                4. www.i-sterik.com
                  Hello everyone, here’s what I found, if it can help some of you, here it is!!!!

                  ---------------------------------------------------------------------------

                  Il existe 2 versions de ce scanner, un 310P (port parallèle) et un 310S (port SCSI)

                  Les pilotes du 310S sont ici :
                  http://www.agfa.com/digicam_scanner.../snapscan_310s/

                  Agfa n'a pas de pilotes XP pour le 310P. Ils ont des pilotes Windows 2000 qui PEUVENT fonctionner sous XP. Ils sont ici :
                  ftp://EndUser:243dsf9d@cso4.agfa.co...SP_EZ_V1401.EXE

                  Pour essayer cela, créez un point de restauration sous XP au cas où cela ne fonctionnerait pas correctement.
                  Ensuite, installez les pilotes. Vous devrez peut-être également définir le fichier exe en mode de compatibilité Windows 2000.

                  Je crois que c'est un scanner Acer 310P rebrandé et Acer a des pilotes XP disponibles ici :
                  http://www.benq.com/ss_download/dri...scan_v3424p.exe
                  0
                  1. poirier alain
                    Bonjour, je recherche le pilote du scanner Agfa 310 sous XP, merci.
                    0
                    1. www.i-sterik.com
                      Hi Alain,

                      Actually, it doesn't exist, I went to the AGFA website and they clearly state that they will never release a driver for winxp for this scanner (SNAPSCAN 310 Parallel port) and that if we really want to use it, we should dual boot with win2K, Me, or 98 !!!!!!!

                      I tried all sorts of solutions and none of them work !!!!!

                      THANK YOU AGFA !!!!!!!!!!!!! ;op

                      Catch you later Alain, sorry again !! I'm in the same situation as you !!! :o(
                      0
                  2. fred50
                    The solution exists for the 310P !!!

                    I have an Agfa 310P scanner that works perfectly under XP.

                    Everything is available at this address http://scandriver.site.voila.fr/

                    See you later!
                    0
                    1. triac
                      Hi Fred, I stumbled upon your message on the forum (2004 !!). You suggested a method to make the Snapscan 310 P work on XP, but the link no longer exists. If you could provide me with some information, I would be infinitely grateful. Thank you. PS my personal email: m.piana@wanadoo.fr
                      0
                  5. trunck
                    Hello
                    I have a SnapScan 310 for the drivers, I think it's fine! But I have an IRQ problem with the SCSI card on the ISA bus under XP, I think the problem comes from there! How to change the IRQ of the card, which is 15 like the secondary filo please, thank you.
                    0
                    • 1
                    • 2