View original (French)

Plug and play is not working anymore.

Hedebert Posted messages 4 Status Membre -  
Hedebert Posted messages 4 Status Membre -
Hello, due to the absence of sound and video service on my PC, I did some research. The device manager was empty, and upon digging deeper, I discovered that the source of the problem was my Plug and Play, which does not want to start anymore. It displays the following error: "Cannot start the Plug and Play service on a local computer." Error 1075: The dependency service does not exist or has been marked for deletion.
Configuration: Windows XP Firefox 3.0.1

6 réponses

Réponse 1 / 6
baptcollot Posted messages 141 Status Membre 15
 
Look at this, and set up your services as recommended, it should work.
3
Réponse 2 / 6
Hedebert Posted messages 4 Status Membre
 
Uh, excuse me but you must have forgotten something in your message :S
0
Réponse 3 / 6
baptcollot Posted messages 141 Status Membre 15
 
Oh yes, I'm sorry!
Configure the Windows services to access the service management:
Control Panel --> Administrative Tools --> Services.

https://www.pcastuces.com/pratique/windows/services/page4.htm

The Plug and Play service is dependent on another one.
Configure them as indicated and it should work!
0
Réponse 4 / 6
Hedebert Posted messages 4 Status Membre
 
I set it up as indicated, but a significant number of services are disabled, and I cannot reactivate them because they depend on plug and play. Is PnP really dependent on another service? If so, let me know which one, I may have missed that one. :/
0
Réponse 5 / 6
baptcollot Posted messages 141 Status Membre 15
 
Try a more brutal method; enable all possible services (set them to automatic)
Restart, then try to enable PNP.
Then reset to the recommended configuration.
0
Réponse 6 / 6
Hedebert Posted messages 4 Status Membre
 
.. No change...
0