Wii Controller Synchronization

Solved/Closed
evan55 Posted messages 5 Status Membre -  
iceman94260 Posted messages 747 Status Membre -
Hello,

How to sync the Wii controller. Thank you in advanceConfiguration: Windows XP Internet Explorer 6.0

6 réponses

iceman94260 Posted messages 747 Status Membre 2 077
 
417
kal0mpee Posted messages 3373 Status Membre 239
 
If it's controller 1, for example, press (when you are in the main menu) the button 1 (at the bottom of the controller), the button 2 if it's the 2nd controller, and so on...
415
evan55 Posted messages 5 Status Membre
 
I thank you for the information. I owe you one. Thank you, have a nice day.
0
evan55 Posted messages 5 Status Membre
 
< p >My problem is solved, thank you all, have a nice day.< /p >
0
océane-nazan
 
thank you very much
0
Cathy65
 
yes but what about controller number 3 and 4??
0
Potionmagik85 Posted messages 22 Status Membre 2
 
Hello,

To synchronize the Wii controllers, you need to press the small red button on the controller (located next to the batteries) and the sync button on the Wii at the same time (you need to open the small door on the front of the console, and the button is right next to the SD card slot).
222
nad17
 
Hello, I have the same problem, and how long should I press approximately?
0
nad17
 
Hello
I have the same problem, I would like to know how long it needs to stay on, thank you in advance.
0
lomitee > nad17
 
You need to open the Wiimote cover, press the red button (a single press is enough), then open the cover located on the front of the Wii, and press the red button on the Wii for a few seconds.
0
ayman191
 
I do it, it doesn't happen to me, it's not normal.
0
lumhaii
 
me too, I’m in the same boat, what should I do?
0
roro
 
You need to go to home and settings and change the order, that disables all the controllers, and you have to press 1 AND 2. There you go, all the controllers are connected. Press B and keep playing easy :)
101
Stephanie
 
Good evening
I have a problem with my Wii, it turns out that synchronization won't work even after trying all the options provided.
All the lights blink when I press one or more buttons
How do I get it to work again??
P.S.: I have plugged and unplugged the Wii
changed the batteries in the Wiimotes
synchronized with the red buttons
Thank you in advance
0
juju
 
But if they are not synchronized, we cannot go to the home menu!
0
Miko
 
Me, none of my Wiimotes are connected to my Wii. As a result, I can't play because I don't remember how to sync controller number 1.
Hoping you can help me...
78
MORGAN 92
 
ME NEITHER and IT PISSES ME OFF
0
KleiineStern Posted messages 5 Status Membre 1
 
Good evening!
I have a little problem!
Let me explain, when I turn on my console, I can press "A" with my controller (#1) but the cursor doesn't show up anymore. I tried unplugging and replugging the sensor just in case it was poorly connected, but nothing works. I then swapped the positions of my controllers by syncing them, and the controller that was #2 works (the cursor finally appears). Can I fix this?! Because the buttons work, it's just the cursor that doesn't show up...
I hope I described it well...
Thank you for responding.
60
nous
 
me too, I have the same problem as you
0
Haze > nous
 
Under the slot for the CDs, there's a small hatch; open it, and you'll see a red button. Press it, then press the button on one of the controllers (located where you put the batteries). I can't remember if you need to press the console's button or the controller's button first, but basically, that's where it happens, so mess around with the buttons, and it should work.

++
0
émilie1203 Posted messages 16 Status Membre 1
 

When I turn on my Wii, I press the red button on the Wii and then on the Wiimote, it blinks for 30 seconds and then it turns off with both Wiimotes?! Can you help me, thanks :)

0