Wii Fit / Wii Synchronization Issue

Question

Hello,

I have a problem with my Wii Fit. I can't sync it with the Wii.

When the disc asks me to turn on the Wii board, it blinks blue and then disconnects my Wiimote! I have to reset the console.

It worked for a day but since then, nothing works!

Thank you in advance for your help!

Configuration: wii

babasarah · Accepted Answer

Hi everyone! So, my Wii board is not syncing with my Wii. I've looked at all your advice, but nothing works... Is there any other solution?? Please help me.  babasarah

marjo · Answer

Hey everyone.
Today, October 5, 2008, I went to get myself a Wii Fit, but my problem is that when I read the instruction manual, I didn't see that I shouldn't hold down the reset button for more than 10 seconds, which caused my Wii remotes to stop working!!! I don't know what to do; they don't work in any game. When I need to press A, my remotes aren't responding, and I've put in new batteries... Please help me!

tokxin · Answer

synchronize both at the same time -- nice =)

Beib' · Answer

Hi, I have a problem with the Wii board, I'm syncing the Wii to the Wii board and it won't turn on.

marjo · Answer

It's working for me again, you just need to resynchronize everything, act as if you've just bought the Wii, synchronize the remote controls and then the Wii Fit. Above all, stay calm or it won't work, lol.
Good luck, and if you don't succeed, I might be able to explain it to you properly again, but sorry, I don't have the time right now!!!
Bye

ig · Answer

Salut, en fait il faut appuyer sur le bouton "sync" qui est sur la télécommande. Bjouuute.

la pro wii · Answer

For the Wii Balance Board

First, you need to insert the game, then go into the game and start it, then press the red synchronization button on both the Wii Balance Board and the Wii.

Each game must be synchronized separately.

You do not need to synchronize the controllers with the Wii Balance Board!!! It only synchronizes with the Wii!!

Otherwise, for the controllers, just press the synchronize button on both the controller and the Wii!!!

Good luck!!

clem31 · Answer

I also have a problem with synchronization; when I'm asked to press power for the physical tests, I get a message saying "I am no longer connected" even though the scale is on. What should I do?
Thank you for responding.

didi06 · Answer

Hello,

I just bought my Wii, it works, I synchronized my controllers, then I try to synchronize my Wii board (it's not the Nintendo brand, I bought it new online) and I can't do it, the Wii board flashes for 3 seconds and then turns off!!

Does anyone have an answer???

Sandraa · Answer

Just to know if you succeeded .... ? I have the same thing as you !! For a LONG TIME now :( At the beginning, it worked wonderfully .. and now NOTHING !! It's annoying --'

lowrel · Answer

Hey everyone !!!

For anyone having synchronization issues, I think I have the answer since I had the same problem at first too.

- Once you reach the step where the game asks you to turn on the board, synchronize it.

- To do this, press and hold simultaneously for a few seconds the red button on your Wii and the button on your board where the batteries are located.

- IF your controller disconnects, open it and synchronize the controller first, then the board...

Logically, everything should fall into place....

If it doesn't work, let me know =)

mii_enragé · Answer

A BIG THANK YOU!!!!

Finally... after syncing the controllers for 4 hours... as it should be... my board kept desyncing the controllers and I had to start over when it finally worked...

The secret is indeed not to exceed 5 seconds. I synced in 4 seconds and it works...

thank you...thank you...thank you

sacaz · Answer

A big thank you

Hello, after numerous attempts with my board to get it to work, I managed to sync it for 4 seconds and it’s perfect. A big thank you for your advice, thank you, thank you. Best regards, sacaz

cococroft · Answer

Hello,
You almost need to place the scale next to the console,
cut off all interferences, like the internet,
put the game CD in,
go ahead and start,
press the red button on the console, release it, then press the sync button on the scale.
The power button on the scale will start blinking and stay lit.
For me, that's how it finally worked.
Good luck!

Wii Fit / Wii Synchronization Issue

14 réponses

Samsung j5 unable to answer

Scam of the suvedene highway

Minecraft restore the cursor and the bar.

My ps3 keeps shutting down on its own...

Samsung series 4 led tv logo display...

How to enable bluetooth on a samsung tv?

Ctrl key issue

[metin2] sura ...

Freebox tv locked step 2 or network

Error 46 (brother dcp-150c) cleaning impossible