Weather station CPN03 INOVALLEY
CARAIBEAN EXPRESS
Posted messages
1
Status
Membre
-
phil -
phil -
Hello,
I bought a weather station from the brand INOVALLEY, but I am very disappointed; the weather station (base) does not pick up the outdoor sensors.
Reinstalled several times, the same problem persists, and the so-called automatic search for the sensors always ends in failure.
I bought a weather station from the brand INOVALLEY, but I am very disappointed; the weather station (base) does not pick up the outdoor sensors.
Reinstalled several times, the same problem persists, and the so-called automatic search for the sensors always ends in failure.
4 réponses
Hello,
Same model of weather station, and the same problem with the outdoor sensor, which only picks up at 2cm from its base (!)...
If it's 5 meters away (outside, which is its intended purpose)... it remains undiscovered by its base...
I thought I read somewhere that a power supply (3-volt adapter) was needed to solve this issue. Since I have a basin and an electrified and waterproof surveying device, I will give it a try...
It's a shame because this station was very promising, its design is successful, and its numerous graphic possibilities... I remain frustrated not to have the external temperature and humidity... yet it's not for lack of trying all the channels and all the outdoor positions!
I sent an email to Inovalley to report this problem and to see if there was a "trick"... we will see.
Beware of the "modern man" who sells this product for 250 euros!!! It's a rip-off, on CDISCOUNT it's 147 euros!
Same model of weather station, and the same problem with the outdoor sensor, which only picks up at 2cm from its base (!)...
If it's 5 meters away (outside, which is its intended purpose)... it remains undiscovered by its base...
I thought I read somewhere that a power supply (3-volt adapter) was needed to solve this issue. Since I have a basin and an electrified and waterproof surveying device, I will give it a try...
It's a shame because this station was very promising, its design is successful, and its numerous graphic possibilities... I remain frustrated not to have the external temperature and humidity... yet it's not for lack of trying all the channels and all the outdoor positions!
I sent an email to Inovalley to report this problem and to see if there was a "trick"... we will see.
Beware of the "modern man" who sells this product for 250 euros!!! It's a rip-off, on CDISCOUNT it's 147 euros!
Bizarrely, my other weather station (bought at Babou for €14) picks up the 2 external sensors! This Inovalley brand is really crap.
Hello, could someone please help me? I bought the Innovaley SMPro50 weather station, but unfortunately, it always stays on the sun icon regardless of the weather—snow, rain, etc. I've tried everything: different batteries, different locations, nothing changes. Even if I set it to cloud, it goes back to sun. However, it gives me the correct temperatures, pressures, etc. I've inserted the batteries in every possible orientation, transmitters first and base after, and vice versa, but nothing changes. It's been a month and a half that it's stuck on the sun. Thank you for your help!
Because for me it's the same, impossible to catch on, disappointing!
It's a shame because without that, the product is perfect, I'm going to keep pressing them until I get a response ^^
I have the same issue with this station and I would like to know if you have heard any news from INOVALLEY.
Thank you