Connect a Behringer Eurorack UB1002 to PC
bonar
-
Anonymous user -
Anonymous user -
Hello, I would like to connect my Behringer eurorack UB1002 to my computer's sound card. This one is as basic as it gets. I want to make this connection in order to record my guitar compositions on my computer.
Thank you for your help!
Thank you for your help!
Configuration: Windows XP Firefox 2.0.0.14
13 réponses
You simply connect the output of your mixer to the line input of your sound card!
http://www.behringer.com/UB1002/index.cfm?lang=Eng
Check out this link, there’s plenty of info about your gear!
http://www.behringer.com/UB1002/index.cfm?lang=Eng
Check out this link, there’s plenty of info about your gear!
You connect a double RCA cable with a stereo jack at the end to the "tape out" of your mixing console, and plug the jack into the line input of your sound card (usually blue or gray). The green is for the sound output (line) and the pink is for the microphone input.
I am attaching here the corresponding photo of my sound card (click on the link):
http://thepixies86.skyrock.com/photo.html?id_article=1718834732</code>
yes...good gear your table, but for recording the guitar directly to the PC I prefer a good old jamlab!
Christmas, birthday... everything is good!
But more seriously, I think this model will meet my expectations. Apparently, it's not difficult to use and, well... I'm not going to record myself for concerts!
But more seriously, I think this model will meet my expectations. Apparently, it's not difficult to use and, well... I'm not going to record myself for concerts!
Hello!
I received my console today but... even after searching a lot, I really can't see how I could connect it to my PC!
Could someone provide me with a diagram or tell me which port goes with which port... with which cable...
Thanks in advance, and I'm sorry if I'm being a pain!
I received my console today but... even after searching a lot, I really can't see how I could connect it to my PC!
Could someone provide me with a diagram or tell me which port goes with which port... with which cable...
Thanks in advance, and I'm sorry if I'm being a pain!
Here is my problem: I have an Eurorack mixing console, UB802, UB1002, UB1202, and I took the two plugs to connect to the turntable and one that goes to the computer connected to the microphone. I plug in the microphone and there is no sound coming out. Could you please help me? Thank you.
Hi, I have a small problem... let me explain:
I want to connect my two guitars and a synth to the mixer.
I would like these three instruments to be connected to a VOX DA5 amp with effects, which would then be connected to the mixer. I want everything to output to a large hi-fi system that I have... the problem is that I don’t know if we can connect the LINE-IN of the VOX to the mixer... also, I’m having a hard time understanding if we can have separate audio outputs (the tape output and the general bus output...)
Please help me! :(
I want to connect my two guitars and a synth to the mixer.
I would like these three instruments to be connected to a VOX DA5 amp with effects, which would then be connected to the mixer. I want everything to output to a large hi-fi system that I have... the problem is that I don’t know if we can connect the LINE-IN of the VOX to the mixer... also, I’m having a hard time understanding if we can have separate audio outputs (the tape output and the general bus output...)
Please help me! :(
To summarize; you want to connect your three instruments to the Vox and the Vox to the mixer to output to a sound system?
Everything that is "in" is an input.. it's "out" that's the outputs.
Why don't you connect everything to the mixer and output to the Vox and the sound system? Or the Vox output to the sound system.
It's going to give a lousy sound for the guitar through a sound system!!! It doesn’t sound like a guitar amp through a sound system!
Everything that is "in" is an input.. it's "out" that's the outputs.
Why don't you connect everything to the mixer and output to the Vox and the sound system? Or the Vox output to the sound system.
It's going to give a lousy sound for the guitar through a sound system!!! It doesn’t sound like a guitar amp through a sound system!
Well, at the same time, it's a 5W modeling amp... I find the sound much more powerful when I connect it to the VOX and then to the mixer... but anyway, when I connect the headphone output of the VOX to an input on the mixer, it creates feedback... I hear a loop... so I think I won't be able to connect the instruments to the mixer first... to the VOX, which then goes back to the mixer :( I'll have to connect everything separately all the time, pfff.