View original (French)

Schneider 37TVB1039B TV Combo

skylian -  
 tartif -
Hello,
good evening,

I have a TV combi that was given to me, Schneider 37tvb1039b

I have the remote control but no manual. Could someone send me some instructions or the manual to my email?

Would the instructions from Pissenlix be applicable to this combi?

Thanks a lot

Sky
Configuration: Windows XP Firefox 2.0.0.12

3 answers

  1. agneslilou
     
    Good evening,
    I just came across your message and hope you managed to solve it, but just in case, I'm giving you the answer

    Here it is
    You need to turn on the TV, then with the remote control, press the menu V- and V+ buttons simultaneously
    The installation menu will appear on the screen
    Then you select AUTO search and there you go, happy searching
    bye
    Agnès
    1
    1. maya
       
      Hello

      I am also in your situation, but even with your advice, I still don't have the way to change the channels. What are the V+ and V- buttons, the ones for the programs????
      0
    2. sokol
       
      After turning on the TV and a channel, press V- and V+ (volume) simultaneously and the installation menu will appear. Thanks to agneslilou.
      0
    3. tartif
       
      When you pressed vol+ and vol- at the same time, then you go to MANUAL search, then you go to search ---MHZ and let it scroll. When it stops, check the name of the channel at the top right, then go to prog number and enter the number where you want your channel to appear. Then go to memorization and press OK (Don't forget that). And you repeat this for each channel (you press search ---MHZ again and it starts over). Good luck, it works, I found everything.
      0
  2. valou
     
    Hello

    Did you get your manual???? I have a Schneider 37tvb10/39N TV combi and I no longer have the manual to search for channels. If you managed to get one, could you send it to me?
    Thanks a lot
    0
    1. poppy 80
       
      Hello,

      I just got a Schneider television model no. 37 TVB 10/39 N and I don’t have the original remote or the manual.
      Do you still have the manual?
      Thank you

      Best regards
      0
    2. tartif
       
      Hi, good news. I found it! You press both vol+ and vol- at the same time, then go to manual search. From there, go to search ---MHZ and let it scroll. When it stops, look at the top right for the channel name. Go to program number and enter the number of the channel you chose (e.g.: TF1 on search, you enter TF1 on program number, then go to memorization and press OK (don't forget to do this). Then you repeat for each channel starting with search---MHZ. Once you're done, press menu again and it works. Good luck!
      0
  3. tartif
     
    Hello, I finally found you after searching hard, you're saved. First, you press the volume + and volume - buttons on the remote control at the same time. You have a new program, press manual search then go to search---MHZ and let it scroll until a program appears there (e.g.: TF1), then go to program number and enter TF1, then go to memorization and press OK. Do the same for each channel when a search stops on---MHZ (the channel number is at the top right). Good luck, but it works, don't forget to memorize each time.
    0