View original (French)

Graphics card fan speed

JiJi -  
 minidou -
Hello, I recently overclocked my graphics card and I would like to know how I could modify the speed of my graphics card fan, and if I modify the speed of my CPU fan, will my GPU be a bit cooler and if so, how could I modify its speed?
Thank you in advance.

Best regards, JiJi. 
Configuration: Windows XP Internet Explorer 7.0

14 réponses

Réponse 1 / 14
Anonymous user
 
no, the CPU cooler won't change anything, but you can buy a rheobus for your CPU and GPU cooler.
0
Réponse 2 / 14
JiJi
 
There is no software to modify the speed of the GPU fan?
0
VapyDark Posted messages 1232 Registration date   Status Membre Last intervention   94
 
???


Of course, you need to combine ATI Tool + RivaTuner

tutorial:

http://forum.matbe.com/materielbe/Hardware/CartesgraphiquesEcrans/tuto-riva-tuner-sujet_15241_1.htm
0
JiJi > VapyDark Posted messages 1232 Registration date   Status Membre Last intervention  
 
J'ai déjà RivaTuner et j'ai essayé, comme tu m'as dit, de l'associer avec ATI Tool, mais il me met un message d'erreur disant qu'il n'y a pas de pilotes Catalyst d'installés.
0
VapyDark Posted messages 1232 Registration date   Status Membre Last intervention   94 > JiJi
 
???

ATI tool for overclocking and RivaTuner for GPU cooling...

ATI tool: https://www.clubic.com/telecharger-fiche17858-atitool.html


Method for GPU ventilation RivaTuner:

Software here: https://www.guru3d.com/files/RivaTuner-v2.07-download-163.html
GPU ventilation method: http://forum.matbe.com/materielbe/Hardware/CartesgraphiquesEcrans/tuto-riva-tuner-sujet_15241_1.htm


With this method, I pushed my GeForce 8 GTS 320 to 600/900 (1st generation) without difficulty, achieving a bandwidth of 73.1 and the full temperature is 61 °

0
minidou > VapyDark Posted messages 1232 Registration date   Status Membre Last intervention  
 
J'ai suivi le tuto que tu m'as passé pour RivaTuner, mais cette option est inaccessible.
0
Réponse 3 / 14
Anonymous user
 
no, if you haven't had it with your CM
0
Réponse 4 / 14
Anonymous user
 
Yeah, is it a PC from a big brand? Like HP or Acer?
0
Réponse 5 / 14
JiJi
 
Yes, Packard Bell, so there is no solution?
0
Réponse 6 / 14
Anonymous user
 
well no, except for a rheobus, no
0
Réponse 7 / 14
titi 86 Posted messages 1873 Status Membre 166
 
hi
you're also forgetting nTune from Nvidia which allows for overclocking and adjusting the fan speed of Nvidia graphics cards!

if you have an ATI graphics card it won't work with nTune
--
small config asus p5k31vm Q6600 8800 gt 4 gb RAM 500 gb hard drive
motherboard change to a P5N32-E SLI and an sli ready 680 watt power supply
0
Réponse 8 / 14
minidou
 
I have an 8400GS 512MB, I overclocked it with nTune but I couldn't find any settings for the fan.
0
Réponse 9 / 14
titi 86 Posted messages 1873 Status Membre 166
 
if you overclocked the card with ntunes to adjust the fan, it's on the same page but further down
you have two options temperature control (fan locked at 29%)
and direct fan control where you can adjust the fan speed.
--
small config asus p5k31vm Q6600 8800 gt 4 gb RAM 500 gb hard drive
motherboard change for a P5N32-E SLI and an SLI ready power supply of 680 watts
0
Réponse 10 / 14
minidou
 
yes but I can't modify them
0
Réponse 11 / 14
titi 86 Posted messages 1873 Status Membre 166
 
normally you have two control options
either temperature control or fan speed control

and you must first choose speed control and then choose at what speed the fan should run
--
small config asus p5k31vm Q6600 8800 gt 4 gb RAM 500 gb hard drive
motherboard change for a P5N32-E SLI and a 680-watt sli ready power supply
0
Réponse 12 / 14
minidou
 
I have only one option "S.O."
0
Réponse 13 / 14
minidou
 
I am using the ATI tool as you advised me, but as soon as I start the "find max memory," my computer crashes after 10 seconds of searching and I have to reboot. Is this normal?
0
Réponse 14 / 14
JiJi
 
I already bought my PC and the only CD I found is the user manual.
-1