How to disassemble the Packard Bell front panel
Solved
Anonymous user
-
sandra13 -
sandra13 -
Hello everyone,
I have a Packard Bell iMedia 2078 and I can't remove the gray front panel. Indeed, I want to replace the original burner, which is broken, with one that is not (nothing surprising so far!). I can manage to remove the side panels (because that's very easy to do) but I can't seem to get that pesky front panel off. Help me please!
Thanks in advance...
--
Message from Snow White
I have a Packard Bell iMedia 2078 and I can't remove the gray front panel. Indeed, I want to replace the original burner, which is broken, with one that is not (nothing surprising so far!). I can manage to remove the side panels (because that's very easy to do) but I can't seem to get that pesky front panel off. Help me please!
Thanks in advance...
--
Message from Snow White
Configuration: Windows XP Internet Explorer 7.0
4 réponses
If there’s a 3"5 clip on your facade, try the same but pulling inward.
Otherwise, the facade is almost always clipped onto the metal frame.
You need to remove the two side facades and unclip the 6 to 10 clips.
--
CCM Contributor.
Hardware/windows specialist.
Otherwise, the facade is almost always clipped onto the metal frame.
You need to remove the two side facades and unclip the 6 to 10 clips.
--
CCM Contributor.
Hardware/windows specialist.
I'm having trouble; I want to dismantle my Packard Bell iMedia 8612 to change the faulty DVD drive, but I've removed the left side (tower facing me) and I can't remove the front panel. It get stuck in the middle on the right.
What should I do? I'm afraid of breaking something. Thank you for your help; I've been at this for 3 hours, while changing the drive should be easy.
Thank you.
What should I do? I'm afraid of breaking something. Thank you for your help; I've been at this for 3 hours, while changing the drive should be easy.
Thank you.
Thank you in advance!!
Have a good day ^^
Cassandre