Problème de gravure depuis quelques temps??!

Shigokio -
Shigokio - 17 févr. 2008 à 17:38

Bonjour,

Depuis quelques temps je n'arrive plus à graver des DVD , je ne sais pas si sa vient de mon lecteur ,du dvd, de nero...
Bon je vous envoie le log de nero.

 Shigokio
Menasra
****-****-****-****-****-****-****^^

Windows XP 6.0
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.10.1.2
Internal Version: 7, 10, 1, 2

Recorder:             <ATAPI DVD W  DH16W1P>    Version: LP21 - HA 1 TA 0 - 7.10.1.2
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <LC2445C  JIW119C         >Version: 1.01 - HA 1 TA 1 - 7.10.1.2
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : LC2445C JIW119C         1.01  asf7g1j1 Port 5 ID 0  DMA: Off
CdRomPeripheral      : LC2445C JIW119C         1.01  asf7g1j1 Port 5 ID 1  DMA: Off
CdRomPeripheral      : LC2445C JIW119C         1.01  asf7g1j1 Port 5 ID 2  DMA: Off

=== CDRom-Device-Map ===
ATAPI DVD W  DH16W1P       D:   CdRom0
LC2445C JIW119C            I:   CdRom1
LC2445C JIW119C            J:   CdRom2
LC2445C JIW119C            K:   CdRom3
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2045MB (2094976kB)
Free physical memory: 1472MB (1507752kB)
Memory in use       : 28 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

17.2.2008
Graver une image DVD
11:23:12	#1 Text 0 File SCSIPTICommands.cpp, Line 424
	LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	
11:23:13	#2 IMAGEGEN -10 File ImageGen.cpp, Line 366
	Image was written as DAO.
	DAOI:
	 MediaCatalogNumber = ''
	 TocType = 0x00
	 Finalized =  1
	 First/Last Track =  1 /  1
	  1: ISRC = ''
	     Blocksize = 2048
	     TrackMode = 'TRM_DATA_MODE1'
	     TrackConfig = 0x00
	     First/Last Index =  0 /  1
	     Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3705569280
	CUES:
	MTYP: Mediumtype =  DVD (old format) (0x1C)
	Image file name: <C:\Users\Gouirhate\Desktop\Simpson.nrg>
	
11:23:13	#3 Text 0 File Burncd.cpp, Line 3508
	Turn on Disc-At-Once, using DVD media
	
11:23:13	#4 Text 0 File DlgWaitCD.cpp, Line 307
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            1809359 (402:04.59, 3533MB)
	
11:23:13	#5 Text 0 File DlgWaitCD.cpp, Line 319
	Write in overburning mode: NO (enabled: CD)
	
11:23:13	#6 Text 0 File DlgWaitCD.cpp, Line 2972
	Recorder: ATAPI DVD W  DH16W1P, Media type: DVD-R
	 Disc Manufacturer: MBI 01 - RG40
	 Disc Application Code: 64, Disc Physical Code: 193
	
11:23:13	#7 Text 0 File DlgWaitCD.cpp, Line 493
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
11:23:13	#8 Text 0 File ThreadedTransferInterface.cpp, Line 793
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 (1 - DVD-ROM)
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 1809360 (1809360) = #1809360/402:4.60
	    not relocatable, disc pos for caching/writing not required/not required
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1809360 blocks [D: ATAPI DVD W  DH16W1P]
	--------------------------------------------------------------
	
11:23:13	#9 Text 0 File ThreadedTransferInterface.cpp, Line 995
	Prepare [D: ATAPI DVD W  DH16W1P] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    3705569280, ISRC ""
	DAO layout:
	===========
	 ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
	        0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
	        0 |        1 |   1 |    0x41 |  1809360 |        0 | 0x00
	  1809360 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
	
11:23:13	#10 Text 0 File SCSIPTICommands.cpp, Line 215
	SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
	
11:23:13	#11 Text 0 File Burncd.cpp, Line 4294
	Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
	
11:23:13	#12 Phase 24 File dlgbrnst.cpp, Line 1762
	Caching of files started
	
11:23:14	#13 Text 0 File Burncd.cpp, Line 4413
	Cache writing successful.
	
11:23:14	#14 Phase 25 File dlgbrnst.cpp, Line 1762
	Caching of files completed
	
11:23:14	#15 Phase 28 File dlgbrnst.cpp, Line 1762
	Speed measurement started
	
11:23:14	#16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
11:23:14	#17 Text 0 File ThreadedTransfer.cpp, Line 269
	Pipe memory size 590400
	
11:25:19	#18 Text 0 File WriterStatus.cpp, Line 113
	<D: ATAPI DVD W  DH16W1P> start writing Lead-Out at LBA 1809360 (1B9BD0h), length 0 blocks
	
11:25:19	#19 Phase 29 File dlgbrnst.cpp, Line 1711
	Speed measurement completed: 20.9x (28 934 Ko/s)
	
11:25:19	#20 Phase 32 File dlgbrnst.cpp, Line 1762
	Simulation started at 16x (22 160 Ko/s)
	
11:25:19	#21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
11:25:19	#22 Text 0 File DVDR.cpp, Line 3229
	Recording mode: Sequential Recording Mode
	
11:25:19	#23 Text 0 File DVDR.cpp, Line 3385
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
11:25:19	#24 Text 0 File Cdrdrv.cpp, Line 9872
	---- Disc Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Revision number of maximum recording speed: 6.0
	  Revision number of minimum recording speed: -
	  Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - 
	  Class: 0
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
11:25:19	#25 Text 0 File ThreadedTransfer.cpp, Line 269
	Pipe memory size 83836800
	
11:25:23	#26 Text 0 File Cdrdrv.cpp, Line 1352
	11:25:23.773 - D: ATAPI DVD W  DH16W1P : Queue again later
	
11:30:16	#27 Text 0 File WriterStatus.cpp, Line 113
	<D: ATAPI DVD W  DH16W1P> start writing Lead-Out at LBA 1809360 (1B9BD0h), length 0 blocks
	
11:30:44	#28 Text 0 File DVDR.cpp, Line 3787
	EndDAO: Last written address was 1809359 (1B9BCFh)
	
11:30:50	#29 Phase 33 File dlgbrnst.cpp, Line 1762
	Simulation completed successfully at 16x (22 160 Ko/s)
	
11:30:51	#30 Phase 36 File dlgbrnst.cpp, Line 1762
	Burn process started at 16x (22 160 Ko/s)
	
11:30:51	#31 Text 0 File ThreadedTransferInterface.cpp, Line 2721
	Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
	
11:30:51	#32 Text 0 File DVDR.cpp, Line 3229
	Recording mode: Sequential Recording Mode
	
11:30:51	#33 Text 0 File DVDR.cpp, Line 3385
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
11:30:51	#34 Text 0 File Cdrdrv.cpp, Line 9872
	---- Disc Structure: Physical Format Information (00h) ----
	Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Revision number of maximum recording speed: 6.0
	  Revision number of minimum recording speed: -
	  Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - 
	  Class: 0
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	    00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
11:30:51	#35 Text 0 File ThreadedTransfer.cpp, Line 269
	Pipe memory size 83836800
	
11:31:19	#36 Text 0 File Cdrdrv.cpp, Line 1352
	11:31:19.849 - D: ATAPI DVD W  DH16W1P : Queue again later
	
11:31:24	#37 SPTI -1135 File SCSIPassThrough.cpp, Line 179
	CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
	Sense Key:  0x03 (KEY_MEDIUM_ERROR)
	Sense Code: 0x0C
	Sense Qual: 0x00
	CDB Data:   0x2A 00 00 00 00 20 00 00 20 00 00 00 
	Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C 
	Buffer x08220080: Len x10000
	0x01 00 02 00 77 00 00 00 78 EB F0 01 20 00 00 00 
	0x00 00 00 00 00 00 00 00 08 54 48 45 5F 53 49 4D 
	0x50 53 4F 4E 53 5F 4D 4F 00 00 00 00 00 00 00 00 
	
11:31:24	#38 CDR -1135 File Writer.cpp, Line 303
	Write error
	D: ATAPI DVD W  DH16W1P
	
11:31:36	#39 Text 0 File DVDR.cpp, Line 3787
	EndDAO: Last written address was 31 (1Fh)
	
11:31:37	#40 Phase 38 File dlgbrnst.cpp, Line 1762
	Burn process failed at 16x (22 160 Ko/s)
	
11:31:37	#41 Text 0 File SCSIPTICommands.cpp, Line 261
	SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
	
11:31:39	#42 Text 0 File Cdrdrv.cpp, Line 11185
	DriveLocker: UnLockVolume completed
	
11:31:39	#43 Text 0 File SCSIPTICommands.cpp, Line 424
	UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
	

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

Voilà j'éspère que ça peut voous aider, en tout cas mon DVD est un Philips et mon graveur un ATAPI

Afficher la suite

A voir également:

Problème de gravure depuis quelques temps??!
Logiciel de gravure gratuit nero - Télécharger - Gravure
Nero 6 - Télécharger - Gravure
Renommer plusieurs fichiers en même temps - Guide
Logiciel de gravure - Télécharger - Gravure
Combien de temps reste une story sur facebook - Guide

2 réponses

Réponse 1 / 2

Shigokio

S'il vous plait aidez moi!!

Réponse 2 / 2

Shigokio

Je m'impatiente^^

s'il vous plaît, merci

Discussions similaires

Durée d'une diapositive animée

35 GO à l'étranger

Je tiens combien de temps avec 2Go d'internet ?

Acces à snapchat temporairement désactivé

2 go d'internet sa représente quoi

Votre réponse

Discussions similaires