Probleme de conexion wifi
banj
-
bb -
bb -
Bonjour,
Novice sur la banquise, j ai installé ubuntu 7.10 recemment. J essai depuis qques jours d installé le WiFi sur mon Acer Aspire 5920G et je galere un peu. J avais reussi au début a capter du reseau apres avoir installé ndiswrapper mais je n arrivait pas a deverouiller ma connection Alice. J ai donc installe Wicd en esperant avoir plus de succes, et je n arrive meme plus a allumé le wireless.
Pr info :
banj@banjacer:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8600M GT (rev a1)
04:00.0 Memory controller: Intel Corporation Turbo Memory Controller (rev 01)
06:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
08:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
0a:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0a:09.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0a:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
0a:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
0a:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
banj@banjacer:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11g ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Retry min limit:7 RTS thr:off Fragment thr=2346 B
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
banj@banjacer:~$ iwlist
Usage: iwlist [interface] scanning [essid NNN] [last]
[interface] frequency
[interface] channel
[interface] bitrate
[interface] rate
[interface] encryption
[interface] keys
[interface] power
[interface] txpower
[interface] retry
[interface] ap
[interface] accesspoints
[interface] peers
[interface] event
[interface] auth
[interface] wpakeys
[interface] genie
[interface] modulation
banj@banjacer:~$ iwspy
lo Interface doesn't support wireless statistic collection
eth0 Interface doesn't support wireless statistic collection
wmaster0 Interface doesn't support wireless statistic collection
wlan0 Interface doesn't support wireless statistic collection
banj@banjacer:~$ iwpriv
lo no private ioctls.
eth0 no private ioctls.
wmaster0 no private ioctls.
wlan0 Available private ioctls :
param (8BE0) : set 2 int & get 0
get_param (8BE1) : set 1 int & get 1 int
banj@banjacer:~$ sudo lshw -C network
[sudo] password for banj:
*-network
description: Wireless interface
product: PRO/Wireless 4965 AG or AGN Network Connection
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:06:00.0
logical name: wmaster0
version: 61
serial: 00:13:e8:32:42:09
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list logical ethernet physical wireless
configuration: broadcast=yes driver=iwl4965 latency=0 module=iwl4965 multicast=yes wireless=IEEE 802.11g
*-network
description: Ethernet interface
product: NetLink BCM5787M Gigabit Ethernet PCI Express
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:08:00.0
logical name: eth0
version: 02
serial: 00:1b:24:53:1c:3c
size: 100MB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.77 duplex=full firmware=5787m-v3.23 ip=192.168.1.2 latency=0 link=yes module=tg3 multicast=yes port=twisted pair speed=100MB/s
banj@banjacer:~$
eth0 Lien encap:Ethernet HWaddr 00:1B:24:53:1C:3C
inet adr:192.168.1.2 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::21b:24ff:fe53:1c3c/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:33927 erreurs:0 :0 overruns:0 frame:0
TX packets:21857 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:43787188 (41.7 MB) Octets transmis:2072252 (1.9 MB)
Interruption:17
lo Lien encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b)
wlan0 Lien encap:Ethernet HWaddr 00:13:E8:32:42:09
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b)
wlan0:ava Lien encap:Ethernet HWaddr 00:13:E8:32:42:09
inet adr:169.254.3.175 Bcast:169.254.255.255 Masque:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
wmaster0 Lien encap:UNSPEC HWaddr 00-13-E8-32-42-09-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b)
voila j espere qu il y a assez d info... je ne comprend pas tout, j avoue c est assez charabia pr moi.
ah et aussi, j esperant lancé mon wireless avc ca et ca ne marche pas :
banj@banjacer:~$ ifconfig wlan0 up
SIOCSIFFLAGS: Permission non accordée
voila, merci bcp si vs arrivez a fr qqch pour moi, bon we!
Banj
Novice sur la banquise, j ai installé ubuntu 7.10 recemment. J essai depuis qques jours d installé le WiFi sur mon Acer Aspire 5920G et je galere un peu. J avais reussi au début a capter du reseau apres avoir installé ndiswrapper mais je n arrivait pas a deverouiller ma connection Alice. J ai donc installe Wicd en esperant avoir plus de succes, et je n arrive meme plus a allumé le wireless.
Pr info :
banj@banjacer:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8600M GT (rev a1)
04:00.0 Memory controller: Intel Corporation Turbo Memory Controller (rev 01)
06:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN Network Connection (rev 61)
08:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
0a:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
0a:09.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
0a:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
0a:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
0a:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
banj@banjacer:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11g ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Retry min limit:7 RTS thr:off Fragment thr=2346 B
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
banj@banjacer:~$ iwlist
Usage: iwlist [interface] scanning [essid NNN] [last]
[interface] frequency
[interface] channel
[interface] bitrate
[interface] rate
[interface] encryption
[interface] keys
[interface] power
[interface] txpower
[interface] retry
[interface] ap
[interface] accesspoints
[interface] peers
[interface] event
[interface] auth
[interface] wpakeys
[interface] genie
[interface] modulation
banj@banjacer:~$ iwspy
lo Interface doesn't support wireless statistic collection
eth0 Interface doesn't support wireless statistic collection
wmaster0 Interface doesn't support wireless statistic collection
wlan0 Interface doesn't support wireless statistic collection
banj@banjacer:~$ iwpriv
lo no private ioctls.
eth0 no private ioctls.
wmaster0 no private ioctls.
wlan0 Available private ioctls :
param (8BE0) : set 2 int & get 0
get_param (8BE1) : set 1 int & get 1 int
banj@banjacer:~$ sudo lshw -C network
[sudo] password for banj:
*-network
description: Wireless interface
product: PRO/Wireless 4965 AG or AGN Network Connection
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:06:00.0
logical name: wmaster0
version: 61
serial: 00:13:e8:32:42:09
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list logical ethernet physical wireless
configuration: broadcast=yes driver=iwl4965 latency=0 module=iwl4965 multicast=yes wireless=IEEE 802.11g
*-network
description: Ethernet interface
product: NetLink BCM5787M Gigabit Ethernet PCI Express
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:08:00.0
logical name: eth0
version: 02
serial: 00:1b:24:53:1c:3c
size: 100MB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.77 duplex=full firmware=5787m-v3.23 ip=192.168.1.2 latency=0 link=yes module=tg3 multicast=yes port=twisted pair speed=100MB/s
banj@banjacer:~$
eth0 Lien encap:Ethernet HWaddr 00:1B:24:53:1C:3C
inet adr:192.168.1.2 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::21b:24ff:fe53:1c3c/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:33927 erreurs:0 :0 overruns:0 frame:0
TX packets:21857 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:43787188 (41.7 MB) Octets transmis:2072252 (1.9 MB)
Interruption:17
lo Lien encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b)
wlan0 Lien encap:Ethernet HWaddr 00:13:E8:32:42:09
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b)
wlan0:ava Lien encap:Ethernet HWaddr 00:13:E8:32:42:09
inet adr:169.254.3.175 Bcast:169.254.255.255 Masque:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
wmaster0 Lien encap:UNSPEC HWaddr 00-13-E8-32-42-09-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 b) Octets transmis:0 (0.0 b)
voila j espere qu il y a assez d info... je ne comprend pas tout, j avoue c est assez charabia pr moi.
ah et aussi, j esperant lancé mon wireless avc ca et ca ne marche pas :
banj@banjacer:~$ ifconfig wlan0 up
SIOCSIFFLAGS: Permission non accordée
voila, merci bcp si vs arrivez a fr qqch pour moi, bon we!
Banj
A voir également:
- Probleme de conexion wifi
- Voir mot de passe wifi android - Guide
- Changer wifi chromecast - Guide
- Adresse mac wifi - Guide
- Volte wifi - Guide
- Dns wifi - Guide
6 réponses
youpi! merci pour cette rapidité!! Par contre le fichier interface ne s ouvre pas!
sudo gedit /etc/network/interfaces
et si je l ouvre en allant par les fenetre, je ne peut pas enregistrer le resultat final....
pr info, la derniere manipe me donne
banj@banjacer:~$ sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... There is already a pid file /var/run/dhclient.eth0.pid with pid 6367
killed old client process, removed PID file
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
wmaster0: unknown hardware address type 801
wmaster0: unknown hardware address type 801
Listening on LPF/eth0/00:1b:24:53:1c:3c
Sending on LPF/eth0/00:1b:24:53:1c:3c
Sending on Socket/fallback
DHCPRELEASE on eth0 to 192.168.1.1 port 67
There is already a pid file /var/run/dhclient.wlan0.pid with pid 6612
killed old client process, removed PID file
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
wmaster0: unknown hardware address type 801
wmaster0: unknown hardware address type 801
Listening on LPF/wlan0/00:13:e8:32:42:09
Sending on LPF/wlan0/00:13:e8:32:42:09
Sending on Socket/fallback
Don't seem to be have all the variables for eth1/inet.
Failed to bring up eth1.
There is already a pid file /var/run/dhclient.eth0.pid with pid 134519120
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
wmaster0: unknown hardware address type 801
wmaster0: unknown hardware address type 801
Listening on LPF/eth0/00:1b:24:53:1c:3c
Sending on LPF/eth0/00:1b:24:53:1c:3c
Merci pour vos réponse!!
Banj
sudo gedit /etc/network/interfaces
et si je l ouvre en allant par les fenetre, je ne peut pas enregistrer le resultat final....
pr info, la derniere manipe me donne
banj@banjacer:~$ sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... There is already a pid file /var/run/dhclient.eth0.pid with pid 6367
killed old client process, removed PID file
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
wmaster0: unknown hardware address type 801
wmaster0: unknown hardware address type 801
Listening on LPF/eth0/00:1b:24:53:1c:3c
Sending on LPF/eth0/00:1b:24:53:1c:3c
Sending on Socket/fallback
DHCPRELEASE on eth0 to 192.168.1.1 port 67
There is already a pid file /var/run/dhclient.wlan0.pid with pid 6612
killed old client process, removed PID file
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
wmaster0: unknown hardware address type 801
wmaster0: unknown hardware address type 801
Listening on LPF/wlan0/00:13:e8:32:42:09
Sending on LPF/wlan0/00:13:e8:32:42:09
Sending on Socket/fallback
Don't seem to be have all the variables for eth1/inet.
Failed to bring up eth1.
There is already a pid file /var/run/dhclient.eth0.pid with pid 134519120
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
wmaster0: unknown hardware address type 801
wmaster0: unknown hardware address type 801
Listening on LPF/eth0/00:1b:24:53:1c:3c
Sending on LPF/eth0/00:1b:24:53:1c:3c
Merci pour vos réponse!!
Banj
Re-bonjour!! Bon désolé, en fait ca marche.... etonnant, ms qd ca marche j'm attarde pas dessus... Par contre ca ne marche tjs pas. Il me donne ca
banj@banjacer:~$ sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
Ignoring unknown interface wlan0=wlan0.
eth1: ERROR while getting interface flags: No such device
Error for wireless request "Set Encode" (8B2A) :
invalid argument "6441EOFCAB89A5BB8147E6738C".
Error for wireless request "Set ESSID" (8B1A) :
SET failed on device eth1 ; No such device.
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
wmaster0: unknown hardware address type 801
SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
eth1: ERROR while getting interface flags: No such device
wmaster0: unknown hardware address type 801
Bind socket to interface: No such device
Failed to bring up eth1.
banj@banjacer:~$ sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
Ignoring unknown interface wlan0=wlan0.
eth1: ERROR while getting interface flags: No such device
Error for wireless request "Set Encode" (8B2A) :
invalid argument "6441EOFCAB89A5BB8147E6738C".
Error for wireless request "Set ESSID" (8B1A) :
SET failed on device eth1 ; No such device.
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
wmaster0: unknown hardware address type 801
SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
eth1: ERROR while getting interface flags: No such device
wmaster0: unknown hardware address type 801
Bind socket to interface: No such device
Failed to bring up eth1.
Bon, je reprend car j ai été un peu brouillon!! En fait, comme tu me l as indiqué, jai changé le contenu du fichier network/interface pour y introduire :
"auto lo
iface lo inet loopback
iface eth1 inet dhcp
wireless-key **************** ma clé a d ailleurs 26 caractere et non 16...
wireless-essid *******
auto eth1"
Le nouveau probleme se trouve qd je suis sencé relancé ma carte wireless puisqu il me dit :
sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
Ignoring unknown interface wlan0=wlan0.
eth1: ERROR while getting interface flags: No such device
Error for wireless request "Set Encode" (8B2A) :
invalid argument "6441EOFCAB89A5BB8147E6738C".
Error for wireless request "Set ESSID" (8B1A) :
SET failed on device eth1 ; No such device.
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
wmaster0: unknown hardware address type 801
SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
eth1: ERROR while getting interface flags: No such device
wmaster0: unknown hardware address type 801
Bind socket to interface: No such device
Failed to bring up eth1.
voila....
Ah et sinon, sur wicd, en preferace, j ai
WPA supplicant driver : ndiswrapper
Wireless interface eth0
wired interface eth 1
Ca c est ok? (je me renseigne a l avance pour eviter les mauvaises surprise!
Encore merci, désolé d avoir été brouillon, ms je m epuise un peu...
Banj
"auto lo
iface lo inet loopback
iface eth1 inet dhcp
wireless-key **************** ma clé a d ailleurs 26 caractere et non 16...
wireless-essid *******
auto eth1"
Le nouveau probleme se trouve qd je suis sencé relancé ma carte wireless puisqu il me dit :
sudo /etc/init.d/networking restart
* Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
Ignoring unknown interface wlan0=wlan0.
eth1: ERROR while getting interface flags: No such device
Error for wireless request "Set Encode" (8B2A) :
invalid argument "6441EOFCAB89A5BB8147E6738C".
Error for wireless request "Set ESSID" (8B1A) :
SET failed on device eth1 ; No such device.
Internet Systems Consortium DHCP Client V3.0.5
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
wmaster0: unknown hardware address type 801
SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
eth1: ERROR while getting interface flags: No such device
wmaster0: unknown hardware address type 801
Bind socket to interface: No such device
Failed to bring up eth1.
voila....
Ah et sinon, sur wicd, en preferace, j ai
WPA supplicant driver : ndiswrapper
Wireless interface eth0
wired interface eth 1
Ca c est ok? (je me renseigne a l avance pour eviter les mauvaises surprise!
Encore merci, désolé d avoir été brouillon, ms je m epuise un peu...
Banj
Même tarif pour moi, probablement parce que le site de mon portable HP Pavilion DV9000 n'a pas de pilotes Ubuntu.
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question
Salut,
vas par là : http://www.commentcamarche.net/forum/affich 4409479 connexion sans fil ubuntu#0 et regardes mon poste 12 et 14.
A + ;-)
vas par là : http://www.commentcamarche.net/forum/affich 4409479 connexion sans fil ubuntu#0 et regardes mon poste 12 et 14.
A + ;-)