Imprimante HP 2015
Giuliano93
Messages postés
1
Date d'inscription
Statut
Membre
Dernière intervention
-
Hope45 -
Hope45 -
Bonjour,
Je rencontre un souci avec une imprimante HP 2015 (perte configuration adresse ip), ma question est :
Est-ce que quelqu'un serait il comment reinitialiser la conf de l'imprimante (en d'autre terme un cold reset),
Je connaissais la manip sur les hp 2300 mais sur les 2015 aucune idée
Merci d'avance pour vos reponse
Je rencontre un souci avec une imprimante HP 2015 (perte configuration adresse ip), ma question est :
Est-ce que quelqu'un serait il comment reinitialiser la conf de l'imprimante (en d'autre terme un cold reset),
Je connaissais la manip sur les hp 2300 mais sur les 2015 aucune idée
Merci d'avance pour vos reponse
A voir également:
- Imprimante HP 2015
- Télécharger pilote imprimante hp - Télécharger - Pilotes & Matériel
- Hp usb disk storage format tool - Télécharger - Stockage
- Spouleur imprimante - Guide
- Adresse ip imprimante hp - Forum Réseau
- Imprimante en pause hp ✓ - Forum Imprimante
5 réponses
appuyer sur le bouton vert, éteindre l'imprimante et rester appuyé sur le bouton, la rallumer et rester appuyé 15s, trois voyants vont s'allumer...Là tu relâche elle réinitialise...Si c pas la cas, tu fais une mise à jour du firmware...
Bonjour
Est ce qu'il te serait possible de me divulguer comment tu fais pour la hp laserjet 2300?
Va sur cette adresse elle te dira comment faire un cold reset sur une laserjet 2015.
http://h41206.www4.hp.com/webapps/IV3/node.iv;jsessionid=01EFB143F81023B5B92B763EBF4EF0E4.ubbnpwb2?locale=fr_fr&node=prodITRC%2FUK_HS_IPG_PSG_Ktree_Homepage_EN_01_E%2FN1%7C4%7C1%7C31%7C2%7C9&serverId=1
Est ce qu'il te serait possible de me divulguer comment tu fais pour la hp laserjet 2300?
Va sur cette adresse elle te dira comment faire un cold reset sur une laserjet 2015.
http://h41206.www4.hp.com/webapps/IV3/node.iv;jsessionid=01EFB143F81023B5B92B763EBF4EF0E4.ubbnpwb2?locale=fr_fr&node=prodITRC%2FUK_HS_IPG_PSG_Ktree_Homepage_EN_01_E%2FN1%7C4%7C1%7C31%7C2%7C9&serverId=1
Cold reset hp2015
A cold reset changes most system parameters in NVRAM to the factory defaults. However, unlike NVRAM initialization, a cold reset does not reset the page count, the paper tray sizes, language, or formatter number.
NOTE: A cold reset also resets all the HP Jetdirect settings as well as the printer settings.
Use the following procedure to perform a cold reset.
Turn off the printer.
Press and hold the Go button.
Turn the printer on, and continue to hold the Go button for at least 5 seconds, but not longer than 15 seconds. During this process, the Attention LED turns on.
Release the Go button.
NOTE: If both the Attention and the Ready LEDs turn on before you release the Go button, you must start the procedure again with step 1.
The printer's LEDs begin cycling. The cold-reset process runs until completion, and the printer returns to the ready state.
METTRE EN RESOLU
A cold reset changes most system parameters in NVRAM to the factory defaults. However, unlike NVRAM initialization, a cold reset does not reset the page count, the paper tray sizes, language, or formatter number.
NOTE: A cold reset also resets all the HP Jetdirect settings as well as the printer settings.
Use the following procedure to perform a cold reset.
Turn off the printer.
Press and hold the Go button.
Turn the printer on, and continue to hold the Go button for at least 5 seconds, but not longer than 15 seconds. During this process, the Attention LED turns on.
Release the Go button.
NOTE: If both the Attention and the Ready LEDs turn on before you release the Go button, you must start the procedure again with step 1.
The printer's LEDs begin cycling. The cold-reset process runs until completion, and the printer returns to the ready state.
METTRE EN RESOLU
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question