Azureus blocked by firewall
Solved
alexis0788
Posted messages
9
Status
Membre
-
roms -
roms -
Hello,
I have a problem with azureus.
At the bottom of the screen, I have a red ball telling me "NAT (TCP) problem possibly blocked by firewall".
This prevents me from downloading above 5kb/s.
However, the azureus application is allowed in the Windows firewall.
Moreover, I am using the Freebox in router mode.
I am using port 54410 which is my default port for azureus.
During the NAT/firewall test, it tells me that the response time has expired but I see that it tries to connect with the IP I was using before switching my Freebox to router mode.
Additionally, in the advanced network settings, I entered my new IP but nothing changes.
There's no point in trying other bittorrent clients, I've already done that and I still have the same problem.
Thank you for helping me by telling me how to configure my ports, etc.
Alexis
I have a problem with azureus.
At the bottom of the screen, I have a red ball telling me "NAT (TCP) problem possibly blocked by firewall".
This prevents me from downloading above 5kb/s.
However, the azureus application is allowed in the Windows firewall.
Moreover, I am using the Freebox in router mode.
I am using port 54410 which is my default port for azureus.
During the NAT/firewall test, it tells me that the response time has expired but I see that it tries to connect with the IP I was using before switching my Freebox to router mode.
Additionally, in the advanced network settings, I entered my new IP but nothing changes.
There's no point in trying other bittorrent clients, I've already done that and I still have the same problem.
Thank you for helping me by telling me how to configure my ports, etc.
Alexis
Configuration: Windows XP Internet Explorer 6.0
9 réponses
uh, I actually have another problem:
the NAT is OK [accessibility OK (TCP)]
however, the health indicator icons (on the left) remain yellow, and hovering over them shows:
"The tracker is OK, you have connections to clients, but none incoming. If persistent, you likely have a router or firewall configuration issue."
I don't understand..
the NAT is OK [accessibility OK (TCP)]
however, the health indicator icons (on the left) remain yellow, and hovering over them shows:
"The tracker is OK, you have connections to clients, but none incoming. If persistent, you likely have a router or firewall configuration issue."
I don't understand..
switching to router mode does not change the original IP from Free.
you need to go back to the routing settings of the Freebox and specify port 54410 with the protocol (udp or tcp) and assign it to the private IP address of your PC obtained through the Freebox routing.
you need to go back to the routing settings of the Freebox and specify port 54410 with the protocol (udp or tcp) and assign it to the private IP address of your PC obtained through the Freebox routing.
I am with Numericable and I have the same problem. I am on WIFI and port 6881 is not working. I have tested other ports and the same issue persists. Can you help me?