Flash Samsung Galaxy A6

dimitri152 Posted messages 8 Status Member -  
dimitri152 Posted messages 8 Status Member -

Hello,

Knowing that my Samsung Galaxy A6 phone won't turn on and constantly shows a white screen, should I flash the firmware with Odin or is the problem related to something else? Currently, it no longer shows "Could not do normal boot INVALID KERNEL LENGTH" but even when I force the boot, it stays on a white screen after attempting to restart. However, I can't check the settings, and it seems that there is no CSC for Belgium on all the sites, is that normal? Could someone guide me please?


1 answer

  1. bazfile Posted messages 58487 Registration date   Status Moderator Last intervention   20 266
     

    Hello.

    The startup files are apparently damaged or missing and as a result your phone cannot start; flashing your phone is risky especially if you have never done it before, it would be best to take it to a repairer, as this could also be due to a hardware issue.


    bazfile
    Moderator/Security Contributor.
    A greeting, a response, a thank you are always appreciated.

    0
    1. dimitri152 Posted messages 8 Status Member
       

      Oh yeah, I see, but actually my phone is out of warranty and is worth nothing, so I'm afraid of the cost and I looked for a service center but it’s way too far. But there are tutorials to flash the firmware, but I’m not sure because I don’t have firmware for Belgium on the websites, so I'm afraid of installing the wrong one; either there’s one that matches or there’s no possibility.

      0
    2. bazfile Posted messages 58487 Registration date   Status Moderator Last intervention   20 266 > dimitri152 Posted messages 8 Status Member
       

      You should get an official ROM in French, preferably unlocked from a mobile carrier, there are plenty available on the internet examples.

      1
    3. dimitri152 Posted messages 8 Status Member > bazfile Posted messages 58487 Registration date   Status Moderator Last intervention  
       

      Do I obviously take the most recent one or not necessarily?

      0
    4. bazfile Posted messages 58487 Registration date   Status Moderator Last intervention   20 266 > dimitri152 Posted messages 8 Status Member
       

      What you need to check is the reference, for example SM-A600FN; you need to take the reference that corresponds to your phone.

      0
    5. bazfile Posted messages 58487 Registration date   Status Moderator Last intervention   20 266 > dimitri152 Posted messages 8 Status Member
       

      Yes, give it a try and you'll see, anyway, given the state of your phone, you don't have much to lose.

      1