5.1 Usage via blt
bb -
Hello, I found an amplifier (a 5.1 active subwoofer with a 20cm driver from Global Sphere) with 2 speakers (JBL LX1GR Rear) for 35€ on LBC, everything works but I would like to use it in 5.1, but my double RCA to jack cable does not allow me to do so; so, does anyone know how I could make my amplifier work in 5.1, ideally through Bluetooth?
Best regards
5 answers
-
Hello,
What is the reference (Brand and model) of this amplifier?
But achieving 5.1 with 3 speakers seems compromised to me.
For 5.1, you need: a center speaker, 2 front speakers, 2 rear speakers, and a subwoofer.
It’s very hard to catch a black cat in a dark room.
Especially when it’s not there... -
So these are not stereo RCA inputs but 5.1 inputs, one RCA per channel.
So you will need a decoder converter of this type.
It also does Bluetooth.
Very difficult to catch a black cat in a dark room.
Especially when it's not there... -
Okay... No echo on the web... :o(
Can you show me a picture showing the possible connections at the back of this amplifier?
If this amplifier is capable of outputting to 5 speakers, and it only has stereo inputs, then it should convert stereo to 5.1 by itself.
To be able to use Bluetooth devices, you will need to pair it with a Bluetooth receiver.
Very difficult to catch a black cat in a dark room.
Especially when it's not there... -
There are also cheaper converter decoders of the same type, without Bluetooth.
Example https://www.amazon.fr/Convertisseur-Num%C3%A9rique-Analogique-D%C3%A9codeur-Coaxial/dp/B09BCH5N6Z
But with Bluetooth, this is the cheapest one I found.
Very difficult to catch a black cat in a dark room.
Especially when it's not there... -
On the converter from message #9 (without Bluetooth), you can add, to the AUX input, a Bluetooth receiver of this type: https://www.amazon.fr/Transmetteur-r%C3%A9cepteur-Bluetooth-haut-parleurs-adaptateur/dp/B0BHXXWGF4
Very difficult to catch a black cat in a dark room.
Especially when it's not there...