View original (French)

MFP M880 Printer 46.23.3c Error

Fredoman011 Posted messages 1 Status Membre -  
bendrop Posted messages 12655 Registration date   Status Contributeur Last intervention   -

Hello

I have an error message 46.23.3c on my MFP M880 printer

After replacing the transfer kit

Can someone help me.. Thanks

2 réponses

Réponse 1 / 2
Panth33ra Posted messages 23016 Registration date   Status Membre Last intervention   Ambassadeur 2 346
 

Hello,

Is your printer a Brother MFP M880?
0
Réponse 2 / 2
bendrop Posted messages 12655 Registration date   Status Contributeur Last intervention   8 524
 

Good evening,

here is what HP recommends:

  Errors in the 46.* family occur when the printer tries to perform an action that it cannot complete. • No network connectivity • A problem with the file being printed, the software application sending the job, or the print driver Recommended action Use the following general troubleshooting steps to try to resolve the issue. If the error persists, escalate the case using the standard support process. 1. Turn the printer off and then back on. 2. Check that the printer is connected to the network. If not, use a different network cable and check the configuration settings. 3. Send a different file from the same software application to see if the error is specific to the original file. Try sending a job from a different software application to see if the error is specific to the application. Ensure that the correct print driver is installed on the computer. 4. Update the printer's firmware.

Sincerely.
0