View original (French)

Epson xp-2200 setup

Solved
cbaroni Posted messages 51 Status Member -  
cbaroni Posted messages 51 Status Member -

Hello,

I bought an XP-2200 to replace the XP-205 and I have the same problem; it flickers on power-up from the very first power-up and I can't do anything.

Thank you for your help.

7 answers

Answer 1 / 7
kaneagle Posted messages 86254 Registration date   Status Moderator Last intervention   14 676
 

Hello,

Download this driver --> XP-2200

Disconnect the printer cable from the PC
Run the setup.exe of the driver --> epson649702eu.exe
Connect the cable to the PC as soon as prompted
2
Answer 2 / 7
brucine Posted messages 24598 Registration date   Status Member Last intervention   4 136
 

Hello,

It is not uncommon for Epson that the drivers (either from a CD, if there is one, or downloaded) must be installed using the programs provided by Epson even before connecting the printer for it to be recognized; this is, in any case, essential for the scanner if there is one.
1
Answer 3 / 7
Redbart Posted messages 21330 Registration date   Status Member Last intervention   3 378
 

Hello

A printer is a peripheral device; it is the installation of drivers that allows it to communicate with a PC.
0
Answer 4 / 7
cbaroni Posted messages 51 Status Member 1
 

Hello,

I can't manage to get the installation right, the printer is still flashing. Where can I find a tutorial that outlines the steps to take in chronological order? Thank you
0
Answer 5 / 7
cbaroni Posted messages 51 Status Member 1
 

Hello,

I found out why the lights are flashing: during the setup, it says to remove all the stickers, and I had forgotten one! It's better this way.

Thank you and sorry for this beginner's mistake...
0
Answer 6 / 7
Redbart Posted messages 21330 Registration date   Status Member Last intervention   3 378
 

So, you bought two printers and each time you didn't unpack it properly before using it!

Can you send me one of the extra printers? ((:-))
0
Answer 7 / 7
cbaroni Posted messages 51 Status Member 1
 

Hello,

I was able to unpack the printer correctly but I have another issue: I can't install the software properly to use it, every time I print a test page it doesn't work. I have a Windows 11 PC, I'm being suggested to use epson.sn/2200, everything seems to be going fine but the test page won't print. I have a wifi connection.

Thank you for your help.
0