Internet connection limited to 100 Mbps

Valaho -  
brupala Posted messages 111153 Registration date   Status Member Last intervention   -
Hello everyone,

I have a problem that's been driving me crazy for a few days.

I recently acquired a MAG B550 Tomahawk motherboard to replace my old B450 Gaming Plus Max motherboard.

After installation, the PC works but I've noticed that the internet isn't working.
I switched to a speed of 100 Mbps.

I don't understand why; I have already reset the network settings but it still doesn't work.

For your information, I have:
- a Freebox Delta
- a Cat7 Ethernet cable
- and I have to go through a "it works" powerline adapter with a speed of 500 Mbps.

Thank you in advance for your help ????

7 answers

  1. brupala Posted messages 111153 Registration date   Status Member Last intervention   14 450
     
    Hi,
    you've probably never checked, but your powerline adapter should have an ethernet port at 100Mbit/s, which is very common on those things.
    Try connecting your PC directly to the box to see.
    After that,
    for your ethernet port, you should have drivers to install if you haven't done so.

    --
    and ... There you go!
    0
  2. Valaho
     
    Thank you for your quick response!

    But I didn't have this problem with my old motherboard (same port, same cable) and I was capped at 500 Mbits/s.
    0
    1. brupala Posted messages 111153 Registration date   Status Member Last intervention   14 450
       
      How were you measuring that?
      And how are you measuring it now?
      Precisely...
      As for before, it’s going to be hard to verify, indeed.
      The cable has no relevance in this matter, especially if you're using powerline adapters.
      What is the exact and precise model of these adapters?
      0
  3. Valaho
     
    On the network and sharing center of my PC.
    For the powerline adapters, they are "i.t.Works - Kit 2 WiFi Powerline Adapters".
    0
    1. brupala Posted messages 111153 Registration date   Status Member Last intervention   14 450
       
      Yes, so the speed of your Ethernet port...
      It’s not easy to find precise information on these powerline modems, but I doubt the ports are gigabit.
      Have you tried connecting your PC directly?
      P.S.,
      powerline modems that claim to provide 500 Mbit/s don’t actually exist.
      0
  4. Valaho
     
    Yes, I directly connected my Ethernet cable to my router and I'm still stuck at 100Mbps.
    0
    1. brupala Posted messages 111153 Registration date   Status Member Last intervention   14 450
       
      Check that your card is properly set to auto debit in the driver's advanced settings.
      0
      1. Valaho > brupala Posted messages 111153 Registration date   Status Member Last intervention  
         
        Yes, "Speed & Duplex" is indeed set to Auto-Negotiation.
        0
      2. kaumune Posted messages 22605 Registration date   Status Contributor Last intervention   5 158 > Valaho
         
        Is it a WiFi powerline adapter that you use in Ethernet?

        But you will never get 500 Mb/s with it... not even in Ethernet.
        0
      3. Valaho > kaumune Posted messages 22605 Registration date   Status Contributor Last intervention  
         
        But I just connected my PC directly to my Box and I'm still getting 100 Mbps.
        So in the end, it's not the powerline adapter that's the problem.
        0
  5. cristali Posted messages 8615 Registration date   Status Member Last intervention   1 578
     
    Hello, restart your box or reset it.
    0
  6. Valaho
     
    I don't know who you are, or how you did this, but I had already tried this several times and strangely when you told me to do it again... it works!!!!!! I switched to 1Gbits/s

    Thank you very much!!!!
    0
    1. kaumune Posted messages 22605 Registration date   Status Contributor Last intervention   5 158
       
      With connection via powerline adapters?

      As already mentioned, with a 500 Mbps powerline adapter (which is only the theoretical modulation speed of the modem), you cannot achieve a throughput of 1 Gb/s.
      0
  7. Valaho
     
    Not directly on my box
    Since my CPL is limited to 500Mbits/s

    After that, I don't want to be greedy, but on my new motherboard, I have a port that can go up to 2 5Gbits/s

    I wanted to know if it was possible to reach that speed?

    Since my Freebox Delta can theoretically go up to 10Gbits/s and I have a cat7 cable, I don't think it would be impossible.
    0
      1. Valaho > cristali Posted messages 8615 Registration date   Status Member Last intervention  
         
        Is the network adapter to be mounted on the motherboard?
        And how fast can I go with that?
        0
      2. cristali Posted messages 8615 Registration date   Status Member Last intervention   1 578 > Valaho
         
        1 yes in pcie
        2 what the delta can give approximately.
        0
      3. brupala Posted messages 111153 Registration date   Status Member Last intervention   14 450 > Valaho
         
        The bandwidth of a DAC cable is 10 Gbit/s, nothing more, connected to the proper card; after that, there will be a bottleneck at the fiber level for that bandwidth.
        0
    1. brupala Posted messages 111153 Registration date   Status Member Last intervention   14 450
       
      It really is a piece of junk, the fbx delta for its price...
      0