Thomson TT600BT Turntable
guillaume76700
-
baladur13 Posted messages 47297 Registration date Status Moderator Last intervention -
baladur13 Posted messages 47297 Registration date Status Moderator Last intervention -
Hello,
So here I just acquired a Thomson TT600BT turntable that can send sound via Bluetooth. The problem is that I've been struggling for 2 hours trying to connect it, but nothing is working... Sony Bluetooth speaker, Philips soundbar, nada... I'm following the indicated steps but nothing happens... it's starting to slightly annoy me... if anyone knows how to do it, I'm all ears without any problem.
Thank you all.
Configuration: iPhone / Safari 14.1.2
So here I just acquired a Thomson TT600BT turntable that can send sound via Bluetooth. The problem is that I've been struggling for 2 hours trying to connect it, but nothing is working... Sony Bluetooth speaker, Philips soundbar, nada... I'm following the indicated steps but nothing happens... it's starting to slightly annoy me... if anyone knows how to do it, I'm all ears without any problem.
Thank you all.
Configuration: iPhone / Safari 14.1.2
3 answers
Hello, to avoid cables… but I just ordered an RCA/Jack cable… but it's still frustrating, Bluetooth should work, I got this turntable especially for the Bluetooth…
Hello,
The procedure is quite simple.
Excerpt from the notice page FR-9 (10 of the PDF):
How to pair
• First, put the Bluetooth receiver in pairing mode.
• After plugging the power cable of the turntable into an outlet, switch the BT to the ON position at the back panel. The turntable is ready for connection.
• When pairing is successfully completed, the Bluetooth receiver emits the Bluetooth connection sound or its indicator turns blue.
• Switch the BT to the OFF position on the back panel. The turntable will disconnect.
The manual: https://www.bigben.fr/wp-content/uploads/2017/07/TT600BT_Manuel-dutilisation.pdf
--
It's very difficult to catch a black cat in a dark room.
Especially when it’s not there...
The procedure is quite simple.
Excerpt from the notice page FR-9 (10 of the PDF):
How to pair
• First, put the Bluetooth receiver in pairing mode.
• After plugging the power cable of the turntable into an outlet, switch the BT to the ON position at the back panel. The turntable is ready for connection.
• When pairing is successfully completed, the Bluetooth receiver emits the Bluetooth connection sound or its indicator turns blue.
• Switch the BT to the OFF position on the back panel. The turntable will disconnect.
The manual: https://www.bigben.fr/wp-content/uploads/2017/07/TT600BT_Manuel-dutilisation.pdf
--
It's very difficult to catch a black cat in a dark room.
Especially when it’s not there...
