View original (French)

0 byte USB drive, no media

Solved
Anonymous user -  
fabul Posted messages 42187 Registration date   Status Moderator Last intervention   -
Hello
after a mishap (removing the USB key during a recording), I no longer have access to my USB key (0 bytes, unable to format, etc.)
I have already tried many things, but nothing works!
Can you help me!




thank you

4 answers

  1.
    quentin2121 Posted messages 9063 Registration date   Status Member Last intervention   Ambassadeur 1 313
     
    Hello,
    Try using this software to check the status of the USB key and repair it:
    https://www.usbdev.ru/files/chipgenius/

    --

    “Take your chance, hold onto your happiness, and go towards your risk. By looking at you, they will get used to it.” René Char
    0
    1. Anonymous user
       
      Thank you, but I understand how this software works!!
      0
      1. quentin2121 Posted messages 9063 Registration date   Status Member Last intervention   1 313 > Anonymous user
         
        Does the USB key appear in Disk Management? (right-click on the Windows flag at the bottom left)
        0
      2. Anonymous user > quentin2121 Posted messages 9063 Registration date   Status Member Last intervention  
         
        yes letter Y
        0
      3. quentin2121 Posted messages 9063 Registration date   Status Member Last intervention   1 313 > Anonymous user
         
        - Execute (Windows + R)
        - Type cmd then press enter
        - In the window that opens, type "diskpart"
        - list disk
        - select disk x (x being the number of the external hard drive)
        - clean
        - create partition primary
        - format fs=fat32 quick
        - active
        - assign
        - exit to quit diskpart

        exit to quit command prompt

        try this command prompt, but I think the USB key is faulty.
        0
      4. Anonymous user > quentin2121 Posted messages 9063 Registration date   Status Member Last intervention  
         
        it doesn't work error
        0
  2. Anonymous user
     
    it doesn't work error !
    0
    1. quentin2121 Posted messages 9063 Registration date   Status Member Last intervention   1 313
       
      key OUT!
      0
      1. Anonymous user > quentin2121 Posted messages 9063 Registration date   Status Member Last intervention  
         
        ok! And a big thank you for the help!!
        0
  3. fabul Posted messages 42187 Registration date   Status Moderator Last intervention   6 071
     
    Hi,

    With ChipGenius as already mentioned, you just need to right-click in the window and Paste (HERE) so we can see the log.

    After that, we may be able to find a tool to repair it.
    0
    1. Anonymous user
       
      I right-clicked and nothing happened! Here's a screenshot!!
      0
      1. quentin2121 Posted messages 9063 Registration date   Status Member Last intervention   1 313 > Anonymous user
         
        Is it 16 GB?
        0
      2. fabul Posted messages 42187 Registration date   Status Moderator Last intervention   6 071 > quentin2121 Posted messages 9063 Registration date   Status Member Last intervention  
         
        It should be between 8 and 16GB in reality.

        Sometimes (rarely) it detects a memory chip that is double, but we can only get half of that.

        But often when it shows 16GB, we get 16GB.
        0
      3. Anonymous user > quentin2121 Posted messages 9063 Registration date   Status Member Last intervention  
         
        64 GB
        0
      4. fabul Posted messages 42187 Registration date   Status Moderator Last intervention   6 071 > Anonymous user
         
        It might be a FAKE 64GB that actually has 16GB

        You risk losing your data with this firmware

        Did you buy it from an unreliable place?
        0
  4. fabul Posted messages 42187 Registration date   Status Moderator Last intervention   6 071
     
    Download the latest version of FirstChip MPtool here (2020-11-18)

    https://www.usbdev.ru/files/firstchip/fc1179mptools/

    Extract and start FCMPTools.exe

    You can see if it detects it

    You can go to Settings to check if everything is normal (may not be necessary)

    Exit settings, then there should be a Start button to flash the firmware.
    0
    1. quentin2121 Posted messages 9063 Registration date   Status Member Last intervention   1 313
       
      I downloaded and ran FCMTTool.exe and tried it on a USB drive, I get a message that I cannot open the tool!
      0
    2. fabul Posted messages 42187 Registration date   Status Moderator Last intervention   6 071 > quentin2121 Posted messages 9063 Registration date   Status Member Last intervention  
       
      It's FCMPTool, not FCMTTool

      Is it with a key with a FirstChip controller?

      You can see the controller with ChipGenius
      0
    3. quentin2121 Posted messages 9063 Registration date   Status Member Last intervention   1 313 > fabul Posted messages 42187 Registration date   Status Moderator Last intervention  
       
      ????: +[F:]+Composite USB Device (General USB Flash Disk USB Device)

      PNP??ID: VID = 0408 PID = A060
      ?????: 200901010001
      ????: (????????)/1.00

      ????: ??USB?? - USB2.0?? (USB1.1)

      ?????: (??)
      ????: (??)

      ?????: (??)
      ????: (??)

      ????: (??)
      0
    4. fabul Posted messages 42187 Registration date   Status Moderator Last intervention   6 071 > quentin2121 Posted messages 9063 Registration date   Status Member Last intervention  
       
      Which version of ChipGenius did you take? An old one?

      Try the latest one with a password

      ChipGenius v4.20.1107 (2020-11-07) {password = usbdev.ru}; ChipGenius_v4_20_1107_fix.rar; size: 857,473 bytes

      https://www.usbdev.ru/files/chipgenius/

      If your antivirus doesn't like it, you can disable it, the file is safe.
      0
    5. fabul Posted messages 42187 Registration date   Status Moderator Last intervention   6 071 > fabul Posted messages 42187 Registration date   Status Moderator Last intervention  
       
      @Quentin

      VID = 0408 PID = A060

      This is your Webcam
      0