Xbox One Moderate NAT and UPnP Failure // Freebox Revolution
elliot21
Posted messages
6
Status
Membre
-
Blinderstv -
Blinderstv -
Hello
The NAT type of my Xbox Series X console is "moderate" and the message "UPnP failed" is displayed.
I have a Freebox Révolution and I recently switched to fiber.
My IP is shared (availability of ports 32768 to 49151 only) and I cannot request a full-stack fixed IPv4 address (not available at the moment).
I also use a Netgear Orbi network to extend my Wi-Fi.
I have set up port forwarding for all the ports requested by Xbox: Port 88 (UDP) 3074 (UDP and TCP) 53 (UDP and TCP) 80 (TCP) 500 (UDP) 3544 (UDP) 4500 (UDP).
I set different external ports (each time different) to one of the free ports from Freebox (from 32768 to 49151), configured the UDP and TCP protocols as needed, the IP address of the console, and used the ports requested by Xbox for internal port.
UPnP is indeed checked both in the user interface and in the Freebox OS.
Despite this, my NAT is still moderate and my UPnP is failing.
I should point out that I haven't set the Xbox to a fixed IP because it never changes; anyway, when I want to set the IP address manually on the console, I am asked for an IP address, but also a whole lot of parameters that I'm not sure how to fill out (subnet mask, gateway, primary IPv4 DNS, secondary IPv4 DNS...)
I have obviously searched for information online, but nothing really helps me.
Does anyone have any ideas???
The NAT type of my Xbox Series X console is "moderate" and the message "UPnP failed" is displayed.
I have a Freebox Révolution and I recently switched to fiber.
My IP is shared (availability of ports 32768 to 49151 only) and I cannot request a full-stack fixed IPv4 address (not available at the moment).
I also use a Netgear Orbi network to extend my Wi-Fi.
I have set up port forwarding for all the ports requested by Xbox: Port 88 (UDP) 3074 (UDP and TCP) 53 (UDP and TCP) 80 (TCP) 500 (UDP) 3544 (UDP) 4500 (UDP).
I set different external ports (each time different) to one of the free ports from Freebox (from 32768 to 49151), configured the UDP and TCP protocols as needed, the IP address of the console, and used the ports requested by Xbox for internal port.
UPnP is indeed checked both in the user interface and in the Freebox OS.
Despite this, my NAT is still moderate and my UPnP is failing.
I should point out that I haven't set the Xbox to a fixed IP because it never changes; anyway, when I want to set the IP address manually on the console, I am asked for an IP address, but also a whole lot of parameters that I'm not sure how to fill out (subnet mask, gateway, primary IPv4 DNS, secondary IPv4 DNS...)
I have obviously searched for information online, but nothing really helps me.
Does anyone have any ideas???
1 réponse
UP
Same problem, I have the Freebox POP and I'm experiencing a huge drop in speed. I used to download games at around 300 Mb with Orange, and now I barely get 10 with the Free fiber (by the way, for your information, it's showing 5Gb on the box and 700 Mb real on Ethernet)
I've configured the ports too, enabled UPnP and DMZ in the Freebox settings.
However, it says "NAT open" in the Xbox settings, yet the connection and downloads are super slow.
Like elliot21, there's no way to get a full-stack IPv4 (not available at the moment).
Help please
Thank you in advance,
Same problem, I have the Freebox POP and I'm experiencing a huge drop in speed. I used to download games at around 300 Mb with Orange, and now I barely get 10 with the Free fiber (by the way, for your information, it's showing 5Gb on the box and 700 Mb real on Ethernet)
I've configured the ports too, enabled UPnP and DMZ in the Freebox settings.
However, it says "NAT open" in the Xbox settings, yet the connection and downloads are super slow.
Like elliot21, there's no way to get a full-stack IPv4 (not available at the moment).
Help please
Thank you in advance,
Androny
How to open the Nat?
Blinderstv
Do you use a VPN??