View original (French)

TNT HD receiver stuck on BOOT

phil -  
Andy31200 Posted messages 26918 Registration date   Status Modérateur Last intervention   -
Hello, my NT HD TAKARA SL99BP decoder is stuck on BOOT when turned on. No manual action is possible (not even on/off) or with the remote control. I have unplugged it electrically, even for long periods. The forum suggests pressing P+ several times after plugging it back in, but nothing works. Thank you.

Configuration: Windows / Firefox 81.0

3 réponses

Réponse 1 / 3
MPMP10 Posted messages 46973 Registration date   Status Membre Last intervention   18 836
 
Hello,
In that case, you need to buy another one and choose a different brand.

--
A promise is a promise! (Coluche)
0
Réponse 2 / 3
Andy31200 Posted messages 26918 Registration date   Status Modérateur Last intervention   12 197
 
Hello,
Try this:
1 unplug the decoder from the power source
2 unplug the antenna
3 plug it back in while pressing the P+ button on the decoder a TEN times, not on the remote
It will restart and search for updates and come to channel 1 indicating no signal
4 plug the antenna back in and it should work (in theory)
Optionally, perform a channel scan

--
I call a cat a cat *
*in French in the text
0
phil4656 Posted messages 1 Status Membre
 
Thank you for your responsiveness. But nothing works. Long, moderate, or quick presses on P+ make no difference. Have a good day.
0
Réponse 3 / 3
Andy31200 Posted messages 26918 Registration date   Status Modérateur Last intervention   12 197
 
You're welcome, sorry for you, and come back if you have any other questions

--
I call a spade a spade *
     *in French in the text
0