SketchUp texture display bug
Solved
rose
-
rose -
rose -
Hello,
I have a problem with texture display in SketchUp Pro 2017
at first it was fine but after receiving the message to fix.......... I clicked fix
but when I zoom in, it displays normally.
I have a problem with texture display in SketchUp Pro 2017
at first it was fine but after receiving the message to fix.......... I clicked fix
but when I zoom in, it displays normally.
10 answers
I’m sorry
Well, the textures in my SketchUp 2017 document are displaying like this
Here’s the link to the photo:
https://drive.google.com/open?id=1i3AT7DRYlpqr_w07o1QF9AH8VjS6Rnwx
But when I zoom in, they appear normally
https://drive.google.com/open?id=1YyPpyeQDzAPgfADeQixI1GPvQCCIdviQ
Well, the textures in my SketchUp 2017 document are displaying like this
Here’s the link to the photo:
https://drive.google.com/open?id=1i3AT7DRYlpqr_w07o1QF9AH8VjS6Rnwx
But when I zoom in, they appear normally
https://drive.google.com/open?id=1YyPpyeQDzAPgfADeQixI1GPvQCCIdviQ
Hello,
Have you tried replacing the texture with another one?
And what are the dimensions of your texture?
Have you tried replacing the texture with another one?
And what are the dimensions of your texture?
Yes, when I replace them, the problem is solved
but the issue is not just with a single texture; it’s a combination of textures and the dimensions vary.
but the issue is not just with a single texture; it’s a combination of textures and the dimensions vary.
"The set of textures" is it just imported textures or also default textures?
And otherwise, is the gray effect displayed the same every time?
If the problem has been going on for a while, feel free to reinstall SketchUp...
And otherwise, is the gray effect displayed the same every time?
If the problem has been going on for a while, feel free to reinstall SketchUp...
I think it's because of this message:
here's the photo
https://drive.google.com/open?id=1tcHyVoi4xHIyND2A479YOFFahz63QdwS
I clicked on correct.
here's the photo
https://drive.google.com/open?id=1tcHyVoi4xHIyND2A479YOFFahz63QdwS
I clicked on correct.
no, there are no imported textures, these are just the textures from Sketchup
when I change the texture, the gray effect disappears but the problem I want is "the texture that bugs"
now one of the textures is displayed normally
I think it's a temporary issue
when I change the texture, the gray effect disappears but the problem I want is "the texture that bugs"
now one of the textures is displayed normally
I think it's a temporary issue
Good evening,
The corrections suggested by SU only concern the geometry and not the textures: a face is needed to apply a texture, the correction can be made to this face but not to the texture that will be applied. So there is no relation.
It's difficult to say, we would need to have the model but a few remarks:
- The artifact effect may suggest a graphics card problem.
- There is a vibrance effect when moving in the scene when we have overlapping faces (duplicates). This would explain the error message.
- On the left side of the zoomed capture, the part of the texture that is supposed to be correct is still weird: it's not sharp. Has the texture been resized?
To determine if it is a modeling issue or a hardware issue:
1. Open a new blank document.
2. Model a face or a simple cube.
3. Apply the problematic texture.
> If the texture is sharp at all zoom levels, it is a modeling issue.
> If the texture has the same defect, it may be a hardware problem (in which case this defect should also appear on other similar textures) or a texture problem (in which case delete the texture and use another one).
Bonus that has nothing to do with it for the end: it's quite strange to use a wood texture for stone chains...
Have a good evening.
The corrections suggested by SU only concern the geometry and not the textures: a face is needed to apply a texture, the correction can be made to this face but not to the texture that will be applied. So there is no relation.
It's difficult to say, we would need to have the model but a few remarks:
- The artifact effect may suggest a graphics card problem.
- There is a vibrance effect when moving in the scene when we have overlapping faces (duplicates). This would explain the error message.
- On the left side of the zoomed capture, the part of the texture that is supposed to be correct is still weird: it's not sharp. Has the texture been resized?
To determine if it is a modeling issue or a hardware issue:
1. Open a new blank document.
2. Model a face or a simple cube.
3. Apply the problematic texture.
> If the texture is sharp at all zoom levels, it is a modeling issue.
> If the texture has the same defect, it may be a hardware problem (in which case this defect should also appear on other similar textures) or a texture problem (in which case delete the texture and use another one).
Bonus that has nothing to do with it for the end: it's quite strange to use a wood texture for stone chains...
Have a good evening.
yes, apparently it's a modeling issue
and sketchup has just fixed this problem
thank you
ps: the stone chains are no longer wood, these are windows
https://drive.google.com/open?id=1i3AT7DRYlpqr_w07o1QF9AH8VjS6Rnwx
and here is the actual photo
https://drive.google.com/open?id=19h_Z9d2K1QRq4aBT1psqvXBeweE-payN
and sketchup has just fixed this problem
thank you
ps: the stone chains are no longer wood, these are windows
https://drive.google.com/open?id=1i3AT7DRYlpqr_w07o1QF9AH8VjS6Rnwx
and here is the actual photo
https://drive.google.com/open?id=19h_Z9d2K1QRq4aBT1psqvXBeweE-payN