View original (French)

Waiting for authorization on seTracker

elodie -  
 Sam -
Hello,
I bought a SmartWatch for my son but when I try to connect with the app to track it, it says it's waiting for device authorization, but I don't receive any authorization on the watch or even when I insert the SIM card into the phone. When I try to scan the QR code again, it says it's waiting to pair and I'm stuck. Has anyone else experienced this issue? Thank you in advance for your responses.

Configuration: Android / Chrome 79.0.3945.93

1 réponse

Réponse 1 / 1
madmyke Posted messages 52304 Registration date   Status Modérateur Last intervention   12 483
 
Hello and welcome to CCM

There are other posts talking about it HERE AND HERE.

best regards

--
"We gulp down the flattering lies and sip the bitter truths drop by drop."
2
elodie
 
I’ve tried everything... nothing works.
0
madmyke Posted messages 52304 Registration date   Status Modérateur Last intervention   12 483 > elodie
 
In that case, all you have to do is return the watch.
0
MM
 
Thank you
0
Moufidfarid Posted messages 28 Status Membre 5 > MM
 
I finally found the solution:

https://findmykids.org/enblog/en/setting-of-gps-watch-for-kids-using-sms-commands/amp

1. You need to use the following sms command:

pw,123456,apn,internet,ooredoo,ooredoo#

(These are the SIM operator parameters for the watch (APN), in my case: ooredoo/Algeria SIM, this is necessary for the watch's E light to turn on and connect directly to the internet)

pw, 123456, apn, NAME_APN, LOGIN_APN, PASSWORD_APN #

2. Also send:
pw,123456,ip,tcp.findmykids.org,8001#
This is the server for the Google find my kids application.
(To change the server to the Se Traker application, use the sms command:

pw, 123456, ip, 52.28.132.157.8001 #

3. Install the find my kids application and follow the steps.

Thank you
Enjoy.

Your Moufid.s/Algeria
1
Sam > Moufidfarid Posted messages 28 Status Membre
 
Indeed, I did the same, then it automatically switched to tracker 2 and it works, but the location is really not accurate.
0