Echec de connexion de client au serveur openvpn

Bonsoir les amis!
J'ai installe un server openvpn sur un server linux debian9 (en local) c-a-d dans une machine virtuelle dans une machine physique Windows 10

J'ai installe et configure le server et le client openpvn (windows 10) du debut jusqu'a la fin sans probleme
Mais lorsque je lance le service VPN (la connexion du client openvpn au server openpvn) la connexion echoue

Voici le contenu des fichiers respectifs des fichiers de configurations :

____client.log
Thu Aug 16 21:57:31 2018 us=115665 Current Parameter Settings:
Thu Aug 16 21:57:31 2018 us=115665 config = 'client.ovpn'
Thu Aug 16 21:57:31 2018 us=115665 mode = 0
Thu Aug 16 21:57:31 2018 us=115665 show_ciphers = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 show_digests = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 show_engines = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 genkey = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 key_pass_file = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 show_tls_ciphers = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 connect_retry_max = 0
Thu Aug 16 21:57:31 2018 us=115665 Connection profiles [0]:
Thu Aug 16 21:57:31 2018 us=115665 proto = udp
Thu Aug 16 21:57:31 2018 us=115665 local = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 local_port = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 remote = '192.168.12.134'
Thu Aug 16 21:57:31 2018 us=115665 remote_port = '1194'
Thu Aug 16 21:57:31 2018 us=115665 remote_float = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 bind_defined = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 bind_local = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 bind_ipv6_only = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 connect_retry_seconds = 5
Thu Aug 16 21:57:31 2018 us=115665 connect_timeout = 120
Thu Aug 16 21:57:31 2018 us=115665 socks_proxy_server = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 socks_proxy_port = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 tun_mtu = 1500
Thu Aug 16 21:57:31 2018 us=115665 tun_mtu_defined = ENABLED
Thu Aug 16 21:57:31 2018 us=115665 link_mtu = 1500
Thu Aug 16 21:57:31 2018 us=115665 link_mtu_defined = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 tun_mtu_extra = 0
Thu Aug 16 21:57:31 2018 us=115665 tun_mtu_extra_defined = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 mtu_discover_type = -1
Thu Aug 16 21:57:31 2018 us=115665 fragment = 0
Thu Aug 16 21:57:31 2018 us=115665 mssfix = 1450
Thu Aug 16 21:57:31 2018 us=115665 explicit_exit_notification = 0
Thu Aug 16 21:57:31 2018 us=115665 Connection profiles END
Thu Aug 16 21:57:31 2018 us=115665 remote_random = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 ipchange = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 dev = 'tun'
Thu Aug 16 21:57:31 2018 us=115665 dev_type = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 dev_node = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 lladdr = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 topology = 1
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_local = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_remote_netmask = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_noexec = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_nowarn = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_ipv6_local = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_ipv6_netbits = 0
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_ipv6_remote = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 shaper = 0
Thu Aug 16 21:57:31 2018 us=115665 mtu_test = 0
Thu Aug 16 21:57:31 2018 us=115665 mlock = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 keepalive_ping = 0
Thu Aug 16 21:57:31 2018 us=115665 keepalive_timeout = 0
Thu Aug 16 21:57:31 2018 us=115665 inactivity_timeout = 0
Thu Aug 16 21:57:31 2018 us=115665 ping_send_timeout = 0
Thu Aug 16 21:57:31 2018 us=115665 ping_rec_timeout = 0
Thu Aug 16 21:57:31 2018 us=115665 ping_rec_timeout_action = 0
Thu Aug 16 21:57:31 2018 us=115665 ping_timer_remote = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 remap_sigusr1 = 0
Thu Aug 16 21:57:31 2018 us=115665 persist_tun = ENABLED
Thu Aug 16 21:57:31 2018 us=115665 persist_local_ip = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 persist_remote_ip = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 persist_key = ENABLED
Thu Aug 16 21:57:31 2018 us=115665 passtos = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 resolve_retry_seconds = 1000000000
Thu Aug 16 21:57:31 2018 us=115665 resolve_in_advance = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 username = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 groupname = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 chroot_dir = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 cd_dir = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 writepid = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 up_script = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 down_script = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 down_pre = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 up_restart = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 up_delay = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 daemon = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 inetd = 0
Thu Aug 16 21:57:31 2018 us=115665 log = ENABLED
Thu Aug 16 21:57:31 2018 us=115665 suppress_timestamps = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 machine_readable_output = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 nice = 0
Thu Aug 16 21:57:31 2018 us=115665 verbosity = 6
Thu Aug 16 21:57:31 2018 us=115665 mute = 0
Thu Aug 16 21:57:31 2018 us=115665 gremlin = 0
Thu Aug 16 21:57:31 2018 us=115665 status_file = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 status_file_version = 1
Thu Aug 16 21:57:31 2018 us=115665 status_file_update_freq = 60
Thu Aug 16 21:57:31 2018 us=115665 occ = ENABLED
Thu Aug 16 21:57:31 2018 us=115665 rcvbuf = 0
Thu Aug 16 21:57:31 2018 us=115665 sndbuf = 0
Thu Aug 16 21:57:31 2018 us=115665 sockflags = 0
Thu Aug 16 21:57:31 2018 us=115665 fast_io = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 comp.alg = 0
Thu Aug 16 21:57:31 2018 us=115665 comp.flags = 0
Thu Aug 16 21:57:31 2018 us=115665 route_script = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 route_default_gateway = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 route_default_metric = 0
Thu Aug 16 21:57:31 2018 us=115665 route_noexec = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 route_delay = 5
Thu Aug 16 21:57:31 2018 us=115665 route_delay_window = 30
Thu Aug 16 21:57:31 2018 us=115665 route_delay_defined = ENABLED
Thu Aug 16 21:57:31 2018 us=115665 route_nopull = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 route_gateway_via_dhcp = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 allow_pull_fqdn = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 management_addr = '127.0.0.1'
Thu Aug 16 21:57:31 2018 us=115665 management_port = '25340'
Thu Aug 16 21:57:31 2018 us=115665 management_user_pass = 'stdin'
Thu Aug 16 21:57:31 2018 us=115665 management_log_history_cache = 250
Thu Aug 16 21:57:31 2018 us=115665 management_echo_buffer_size = 100
Thu Aug 16 21:57:31 2018 us=115665 management_write_peer_info_file = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 management_client_user = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 management_client_group = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 management_flags = 6
Thu Aug 16 21:57:31 2018 us=115665 shared_secret_file = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 key_direction = 1
Thu Aug 16 21:57:31 2018 us=115665 ciphername = 'AES-256-CBC'
Thu Aug 16 21:57:31 2018 us=115665 ncp_enabled = ENABLED
Thu Aug 16 21:57:31 2018 us=115665 ncp_ciphers = 'AES-256-GCM:AES-128-GCM'
Thu Aug 16 21:57:31 2018 us=115665 authname = 'SHA1'
Thu Aug 16 21:57:31 2018 us=115665 prng_hash = 'SHA1'
Thu Aug 16 21:57:31 2018 us=115665 prng_nonce_secret_len = 16
Thu Aug 16 21:57:31 2018 us=115665 keysize = 0
Thu Aug 16 21:57:31 2018 us=115665 engine = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 replay = ENABLED
Thu Aug 16 21:57:31 2018 us=115665 mute_replay_warnings = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 replay_window = 64
Thu Aug 16 21:57:31 2018 us=115665 replay_time = 15
Thu Aug 16 21:57:31 2018 us=115665 packet_id_file = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 use_iv = ENABLED
Thu Aug 16 21:57:31 2018 us=115665 test_crypto = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 tls_server = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 tls_client = ENABLED
Thu Aug 16 21:57:31 2018 us=115665 key_method = 2
Thu Aug 16 21:57:31 2018 us=115665 ca_file = 'ca.crt'
Thu Aug 16 21:57:31 2018 us=115665 ca_path = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 dh_file = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 cert_file = 'client1.crt'
Thu Aug 16 21:57:31 2018 us=115665 extra_certs_file = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 priv_key_file = 'client1.key'
Thu Aug 16 21:57:31 2018 us=115665 pkcs12_file = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 cryptoapi_cert = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 cipher_list = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 tls_cert_profile = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 tls_verify = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 tls_export_cert = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 verify_x509_type = 0
Thu Aug 16 21:57:31 2018 us=115665 verify_x509_name = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 crl_file = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 ns_cert_type = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 65535
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_ku[i] = 0
Thu Aug 16 21:57:31 2018 us=115665 remote_cert_eku = 'TLS Web Server Authentication'
Thu Aug 16 21:57:31 2018 us=115665 ssl_flags = 0
Thu Aug 16 21:57:31 2018 us=115665 tls_timeout = 2
Thu Aug 16 21:57:31 2018 us=115665 renegotiate_bytes = -1
Thu Aug 16 21:57:31 2018 us=115665 renegotiate_packets = 0
Thu Aug 16 21:57:31 2018 us=115665 renegotiate_seconds = 3600
Thu Aug 16 21:57:31 2018 us=115665 handshake_window = 60
Thu Aug 16 21:57:31 2018 us=115665 transition_window = 3600
Thu Aug 16 21:57:31 2018 us=115665 single_session = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 push_peer_info = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 tls_exit = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 tls_auth_file = 'ta.key'
Thu Aug 16 21:57:31 2018 us=115665 tls_crypt_file = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_protected_authentication = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_private_mode = 00000000
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_cert_private = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_pin_cache_period = -1
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_id = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 pkcs11_id_management = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 server_network = 0.0.0.0
Thu Aug 16 21:57:31 2018 us=115665 server_netmask = 0.0.0.0
Thu Aug 16 21:57:31 2018 us=115665 server_network_ipv6 = ::
Thu Aug 16 21:57:31 2018 us=115665 server_netbits_ipv6 = 0
Thu Aug 16 21:57:31 2018 us=115665 server_bridge_ip = 0.0.0.0
Thu Aug 16 21:57:31 2018 us=115665 server_bridge_netmask = 0.0.0.0
Thu Aug 16 21:57:31 2018 us=115665 server_bridge_pool_start = 0.0.0.0
Thu Aug 16 21:57:31 2018 us=115665 server_bridge_pool_end = 0.0.0.0
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_pool_defined = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_pool_start = 0.0.0.0
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_pool_end = 0.0.0.0
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_pool_netmask = 0.0.0.0
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_pool_persist_filename = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_pool_persist_refresh_freq = 600
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_ipv6_pool_defined = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_ipv6_pool_base = ::
Thu Aug 16 21:57:31 2018 us=115665 ifconfig_ipv6_pool_netbits = 0
Thu Aug 16 21:57:31 2018 us=115665 n_bcast_buf = 256
Thu Aug 16 21:57:31 2018 us=115665 tcp_queue_limit = 64
Thu Aug 16 21:57:31 2018 us=115665 real_hash_size = 256
Thu Aug 16 21:57:31 2018 us=115665 virtual_hash_size = 256
Thu Aug 16 21:57:31 2018 us=115665 client_connect_script = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 learn_address_script = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 client_disconnect_script = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 client_config_dir = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 ccd_exclusive = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 tmp_dir = 'C:\Users\tamn142\AppData\Local\Temp\'
Thu Aug 16 21:57:31 2018 us=115665 push_ifconfig_defined = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 push_ifconfig_local = 0.0.0.0
Thu Aug 16 21:57:31 2018 us=115665 push_ifconfig_remote_netmask = 0.0.0.0
Thu Aug 16 21:57:31 2018 us=115665 push_ifconfig_ipv6_defined = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 push_ifconfig_ipv6_local = ::/0
Thu Aug 16 21:57:31 2018 us=115665 push_ifconfig_ipv6_remote = ::
Thu Aug 16 21:57:31 2018 us=115665 enable_c2c = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 duplicate_cn = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 cf_max = 0
Thu Aug 16 21:57:31 2018 us=115665 cf_per = 0
Thu Aug 16 21:57:31 2018 us=115665 max_clients = 1024
Thu Aug 16 21:57:31 2018 us=115665 max_routes_per_client = 256
Thu Aug 16 21:57:31 2018 us=115665 auth_user_pass_verify_script = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 auth_user_pass_verify_script_via_file = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 auth_token_generate = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 auth_token_lifetime = 0
Thu Aug 16 21:57:31 2018 us=115665 client = ENABLED
Thu Aug 16 21:57:31 2018 us=115665 pull = ENABLED
Thu Aug 16 21:57:31 2018 us=115665 auth_user_pass_file = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 show_net_up = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 route_method = 0
Thu Aug 16 21:57:31 2018 us=115665 block_outside_dns = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 ip_win32_defined = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 ip_win32_type = 3
Thu Aug 16 21:57:31 2018 us=115665 dhcp_masq_offset = 0
Thu Aug 16 21:57:31 2018 us=115665 dhcp_lease_time = 31536000
Thu Aug 16 21:57:31 2018 us=115665 tap_sleep = 0
Thu Aug 16 21:57:31 2018 us=115665 dhcp_options = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 dhcp_renew = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 dhcp_pre_release = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 domain = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 netbios_scope = '[UNDEF]'
Thu Aug 16 21:57:31 2018 us=115665 netbios_node_type = 0
Thu Aug 16 21:57:31 2018 us=115665 disable_nbt = DISABLED
Thu Aug 16 21:57:31 2018 us=115665 OpenVPN 2.4.6 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [LZ4] [PKCS11] [AEAD] built on Apr 26 2018
Thu Aug 16 21:57:31 2018 us=115665 Windows version 6.2 (Windows 8 or greater) 64bit
Thu Aug 16 21:57:31 2018 us=115665 library versions: OpenSSL 1.1.0h 27 Mar 2018, LZO 2.10
Enter Management Password:
Thu Aug 16 21:57:31 2018 us=115665 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340
Thu Aug 16 21:57:31 2018 us=115665 Need hold release from management interface, waiting...
Thu Aug 16 21:57:31 2018 us=506334 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340
Thu Aug 16 21:57:31 2018 us=608055 MANAGEMENT: CMD 'state on'
Thu Aug 16 21:57:31 2018 us=608055 MANAGEMENT: CMD 'log all on'
Thu Aug 16 21:57:31 2018 us=994510 MANAGEMENT: CMD 'echo all on'
Thu Aug 16 21:57:31 2018 us=994510 MANAGEMENT: CMD 'bytecount 5'
Thu Aug 16 21:57:32 2018 us=10134 MANAGEMENT: CMD 'hold off'
Thu Aug 16 21:57:32 2018 us=10134 MANAGEMENT: CMD 'hold release'
Thu Aug 16 21:57:32 2018 us=10134 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Thu Aug 16 21:57:32 2018 us=10134 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
Thu Aug 16 21:57:32 2018 us=10134 Control Channel MTU parms [ L:1621 D:1184 EF:66 EB:0 ET:0 EL:3 ]
Thu Aug 16 21:57:32 2018 us=10134 Data Channel MTU parms [ L:1621 D:1450 EF:121 EB:406 ET:0 EL:3 ]
Thu Aug 16 21:57:32 2018 us=10134 Local Options String (VER=V4): 'V4,dev-type tun,link-mtu 1557,tun-mtu 1500,proto UDPv4,keydir 1,cipher AES-256-CBC,auth SHA1,keysize 256,tls-auth,key-method 2,tls-client'
Thu Aug 16 21:57:32 2018 us=10134 Expected Remote Options String (VER=V4): 'V4,dev-type tun,link-mtu 1557,tun-mtu 1500,proto UDPv4,keydir 0,cipher AES-256-CBC,auth SHA1,keysize 256,tls-auth,key-method 2,tls-server'
Thu Aug 16 21:57:32 2018 us=10134 TCP/UDP: Preserving recently used remote address: [AF_INET]192.168.12.134:1194
Thu Aug 16 21:57:32 2018 us=10134 Socket Buffers: R=[65536->65536] S=[65536->65536]
Thu Aug 16 21:57:32 2018 us=10134 UDP link local: (not bound)
Thu Aug 16 21:57:32 2018 us=10134 UDP link remote: [AF_INET]192.168.12.134:1194
Thu Aug 16 21:57:32 2018 us=10134 MANAGEMENT: >STATE:1534449452,WAIT,,,,,,
Thu Aug 16 21:57:32 2018 us=10134 UDP WRITE [42] to [AF_INET]192.168.12.134:1194: P_CONTROL_HARD_RESET_CLIENT_V2 kid=0 pid=[ #1 ] [ ] pid=0 DATA len=0
Thu Aug 16 21:57:32 2018 us=25760 UDP READ [0] from [AF_UNSPEC]: DATA UNDEF len=-1
Thu Aug 16 21:57:34 2018 us=68518 UDP WRITE [42] to [AF_INET]192.168.12.134:1194: P_CONTROL_HARD_RESET_CLIENT_V2 kid=0 pid=[ #2 ] [ ] pid=0 DATA len=0
Thu Aug 16 21:57:38 2018 us=130538 UDP WRITE [42] to [AF_INET]192.168.12.134:1194: P_CONTROL_HARD_RESET_CLIENT_V2 kid=0 pid=[ #3 ] [ ] pid=0 DATA len=0
Thu Aug 16 21:57:46 2018 us=333871 UDP WRITE [42] to [AF_INET]192.168.12.134:1194: P_CONTROL_HARD_RESET_CLIENT_V2 kid=0 pid=[ #4 ] [ ] pid=0 DATA len=0
Thu Aug 16 21:58:02 2018 us=249355 UDP WRITE [42] to [AF_INET]192.168.12.134:1194: P_CONTROL_HARD_RESET_CLIENT_V2 kid=0 pid=[ #5 ] [ ] pid=0 DATA len=0
Thu Aug 16 21:58:32 2018 us=233708 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Thu Aug 16 21:58:32 2018 us=233708 TLS Error: TLS handshake failed
Thu Aug 16 21:58:32 2018 us=233708 TCP/UDP: Closing socket
Thu Aug 16 21:58:32 2018 us=233708 SIGUSR1[soft,tls-error] received, process restarting
Thu Aug 16 21:58:32 2018 us=233708 MANAGEMENT: >STATE:1534449512,RECONNECTING,tls-error,,,,,
Thu Aug 16 21:58:32 2018 us=233708 Restart pause, 5 second(s)
Thu Aug 16 21:58:37 2018 us=293073 Re-using SSL/TLS context
Thu Aug 16 21:58:37 2018 us=293574 Control Channel MTU parms [ L:1621 D:1184 EF:66 EB:0 ET:0 EL:3 ]
Thu Aug 16 21:58:37 2018 us=293574 Data Channel MTU parms [ L:1621 D:1450 EF:121 EB:406 ET:0 EL:3 ]
Thu Aug 16 21:58:37 2018 us=303081 Local Options String (VER=V4): 'V4,dev-type tun,link-mtu 1557,tun-mtu 1500,proto UDPv4,keydir 1,cipher AES-256-CBC,auth SHA1,keysize 256,tls-auth,key-method 2,tls-client'
Thu Aug 16 21:58:37 2018 us=303581 Expected Remote Options String (VER=V4): 'V4,dev-type tun,link-mtu 1557,tun-mtu 1500,proto UDPv4,keydir 0,cipher AES-256-CBC,auth SHA1,keysize 256,tls-auth,key-method 2,tls-server'
Thu Aug 16 21:58:37 2018 us=303581 TCP/UDP: Preserving recently used remote address: [AF_INET]192.168.12.134:1194
Thu Aug 16 21:58:37 2018 us=304082 Socket Buffers: R=[65536->65536] S=[65536->65536]
Thu Aug 16 21:58:37 2018 us=304082 UDP link local: (not bound)
Thu Aug 16 21:58:37 2018 us=304082 UDP link remote: [AF_INET]192.168.12.134:1194
Thu Aug 16 21:58:37 2018 us=304082 MANAGEMENT: >STATE:1534449517,WAIT,,,,,,
Thu Aug 16 21:58:37 2018 us=304582 UDP WRITE [42] to [AF_INET]192.168.12.134:1194: P_CONTROL_HARD_RESET_CLIENT_V2 kid=0 pid=[ #1 ] [ ] pid=0 DATA len=0
Thu Aug 16 21:58:37 2018 us=305583 UDP READ [0] from [AF_UNSPEC]: DATA UNDEF len=-1
Thu Aug 16 21:58:39 2018 us=632219 UDP WRITE [42] to [AF_INET]192.168.12.134:1194: P_CONTROL_HARD_RESET_CLIENT_V2 kid=0 pid=[ #2 ] [ ] pid=0 DATA len=0
Thu Aug 16 21:58:43 2018 us=140624 UDP WRITE [42] to [AF_INET]192.168.12.134:1194: P_CONTROL_HARD_RESET_CLIENT_V2 kid=0 pid=[ #3 ] [ ] pid=0 DATA len=0
Thu Aug 16 21:58:44 2018 us=849739 TCP/UDP: Closing socket
Thu Aug 16 21:58:44 2018 us=849739 SIGTERM[hard,] received, process exiting
Thu Aug 16 21:58:44 2018 us=849739 MANAGEMENT: >STATE:1534449524,EXITING,SIGTERM,,,,,

___client.ovpn
##############################################
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server. #
# #
# This configuration can be used by multiple #
# clients, however each client should have #
# its own cert and key files. #
# #
# On Windows, you might want to rename this #
# file so it has a .ovpn extension #
##############################################

# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client

# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun

# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one. On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap

# Are we connecting to a TCP or
# UDP server? Use the same setting as
# on the server.
;proto tcp
proto udp

# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote 192.168.12.134 1194
;remote my-server-2 1194

# Choose a random host from the remote
# list for load-balancing. Otherwise
# try hosts in the order specified.
;remote-random

# Keep trying indefinitely to resolve the
# host name of the OpenVPN server. Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite

# Most clients don't need to bind to
# a specific local port number.
nobind

# Downgrade privileges after initialization (non-Windows only)
;user nobody
;group nogroup

# Try to preserve some state across restarts.
persist-key
persist-tun

# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here. See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]

# Wireless networks often produce a lot
# of duplicate packets. Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings

# SSL/TLS parms.
# See the server config file for more
# description. It's best to use
# a separate .crt/.key file pair
# for each client. A single ca
# file can be used for all clients.
ca ca.crt
cert client1.crt
key client1.key

# Verify server certificate by checking that the
# certicate has the correct key usage set.
# This is an important precaution to protect against
# a potential attack discussed here:
# https://openvpn.net/community-resources/how-to/#mitm
#
# To use this feature, you will need to generate
# your server certificates with the keyUsage set to
# digitalSignature, keyEncipherment
# and the extendedKeyUsage to
# serverAuth
# EasyRSA can do this for you.
remote-cert-tls server

# If a tls-auth key is used on the server
# then every client must also have the key.
tls-auth ta.key 1

# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
# Note that 2.4 client/server will automatically
# negotiate AES-256-GCM in TLS mode.
# See also the ncp-cipher option in the manpage
cipher AES-256-CBC

# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
#comp-lzo

# Set log file verbosity.
verb 6

# Silence repeating messages
;mute 20

____server.conf
#################################################
# Sample OpenVPN 2.0 config file for #
# multi-client server. #
# #
# This file is for the server side #
# of a many-clients <-> one-server #
# OpenVPN configuration. #
# #
# OpenVPN also supports #
# single-machine <-> single-machine #
# configurations (See the Examples page #
# on the web site for more info). #
# #
# This config should work on Windows #
# or Linux/BSD systems. Remember on #
# Windows to quote pathnames and use #
# double backslashes, e.g.: #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
# #
# Comments are preceded with '#' or ';' #
#################################################

# Which local IP address should OpenVPN
# listen on? (optional)
;local a.b.c.d

# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one. You will need to
# open up this port on your firewall.
port 1194

# TCP or UDP server?
;proto tcp
proto udp

# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun

# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one. On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap

# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key). Each client
# and the server must have their own cert and
# key file. The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys. Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca /etc/openvpn/easy-rsa/keys/ca.crt
cert /etc/openvpn/easy-rsa/keys/server.crt
key /etc/openvpn/easy-rsa/keys/server.key # This file should be kept secret

# Diffie hellman parameters.
# Generate your own with:
# openssl dhparam -out dh2048.pem 2048
dh /etc/openvpn/dh2048.pem

# Network topology
# Should be subnet (addressing via IP)
# unless Windows clients v2.0.9 and lower have to
# be supported (then net30, i.e. a /30 per client)
# Defaults to net30 (not recommended)
;topology subnet

# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 10.8.0.0 255.255.255.0

# Maintain a record of client <-> virtual IP address
# associations in this file. If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt

# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface. Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0. Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients. Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100

# Configure server mode for ethernet bridging
# using a DHCP-proxy, where clients talk
# to the OpenVPN server-side DHCP server
# to receive their IP address allocation
# and DNS server addresses. You must first use
# your OS's bridging capability to bridge the TAP
# interface with the ethernet NIC interface.
# Note: this mode only works on clients (such as
# Windows), where the client-side TAP adapter is
# bound to a DHCP client.
;server-bridge

# Push routes to the client to allow it
# to reach other private subnets behind
# the server. Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
;push "route 192.168.10.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"

# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).

# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
;client-config-dir ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
# iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN. This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.

# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
# ifconfig-push 10.9.0.1 10.9.0.2

# Suppose that you want to enable different
# firewall access policies for different groups
# of clients. There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
# group, and firewall the TUN/TAP interface
# for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
# modify the firewall in response to access
# from different clients. See man
# page for more info on learn-address script.
;learn-address ./script

# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# or bridge the TUN/TAP interface to the internet
# in order for this to work properly).
push "redirect-gateway def1 bypass-dhcp"

# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses. CAVEAT:
# https://community.openvpn.net/openvpn/wiki/FAQ#dhcpcaveats
# The addresses below refer to the public
# DNS servers provided by opendns.com.
push "dhcp-option DNS 208.67.222.222"
push "dhcp-option DNS 208.67.220.220"

# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
;client-to-client

# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names. This is recommended
# only for testing purposes. For production use,
# each client should have its own certificate/key
# pair.
#
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn

# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120

# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
#
# Generate with:
# openvpn --genkey --secret ta.key
#
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
tls-auth /etc/openvpn/easy-rsa/keys/ta.key 0 # This file is secret

# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
# Note that 2.4 client/server will automatically
# negotiate AES-256-GCM in TLS mode.
# See also the ncp-cipher option in the manpage
cipher AES-256-CBC

# Enable compression on the VPN link and push the
# option to the client (2.4+ only, for earlier
# versions see below)
;compress lz4-v2
;push "compress lz4-v2"

# For compression compatible with older clients use comp-lzo
# If you enable it here, you must also
# enable it in the client config file.
;comp-lzo

# The maximum number of concurrently connected
# clients we want to allow.
;max-clients 100

# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
user nobody
group nogroup

# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun

# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status openvpn-status.log

# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it. Use one
# or the other (but not both).
;log openvpn.log
;log-append openvpn.log

# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
verb 6

# Silence repeating messages. At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20

# Notify the client that when the server restarts so it
# can automatically reconnect.
explicit-exit-notify 1