Connecting speakers to Thomson amplifier PA 3015T
Solved
LeopoldB
Posted messages
2
Status
Member
-
Jojolaguitare Posted messages 12012 Registration date Status Member Last intervention -
Jojolaguitare Posted messages 12012 Registration date Status Member Last intervention -
Hello,
I recently acquired a Thomson PA 3015T 50W amplifier on which I would like to connect two very basic Phillips speakers. The speaker cables are the classic bare red and black wires, but on the amplifier side, here is what I have:
.
Can someone enlighten me on this subject?
Configuration: Windows / Firefox 61.0
I recently acquired a Thomson PA 3015T 50W amplifier on which I would like to connect two very basic Phillips speakers. The speaker cables are the classic bare red and black wires, but on the amplifier side, here is what I have:
. Can someone enlighten me on this subject?
Configuration: Windows / Firefox 61.0
3 answers
-
Hello.
You need this type of male DIN plug: either screw type >>>
https://www.cdiscount.com/high-tech/accessoires/fiche-din-haut-parleur-male-a-vis/f-1062841-eur3528090280104.html?idOffre=24618695#mpos=4|mp
Or solder type >>>
https://www.cdiscount.com/high-tech/accessoires/fiche-din-hp-male-a-souder/f-1062802-eur3528090280005.html
The red wire (+) goes to the small pin and the black wire (-) goes to the flat part in the middle of the plug.
See you...
-
jeannets Posted messages 28464 Registration date Status Contributor Last intervention Ambassador 6 618
Hello,
these are the connectors that should be at the end of your cable https://www.cdiscount.com/high-tech/accessoires/fiche-audio-pour-haut-parleur/f-1062802-auc4040849112409.html?idOffre=131222744#mpos=13|mp -
