Limited Access Windows 7 Wifi
Solved
Stem
-
nadellen Posted messages 11941 Registration date Status Member Last intervention -
nadellen Posted messages 11941 Registration date Status Member Last intervention -
Good evening, I know that the problem has often been raised, and I have tried all possible solutions (forums, YouTube videos, etc...). None have solved my issue; I have tried everything except the right one, which I am still waiting for. The solutions I have tried are as follows:
- Set to auto for ipv4 or ipv6
- Set ipv4 with the IP address 192.168.1.1 and 255...
- Type in command (as admin of course) netsh int ipv4 reset
- Type ipconfig /renew
- Perform the operations by restarting the PC and the box
- Type in cmd: services.msc and check if ClientDHCP was Started and set to Auto
I may have forgotten some, but if anyone can help me it would be great. For your information, I have tried on two boxes, both of which are Freebox Revolution
Thank you in advance.
- Set to auto for ipv4 or ipv6
- Set ipv4 with the IP address 192.168.1.1 and 255...
- Type in command (as admin of course) netsh int ipv4 reset
- Type ipconfig /renew
- Perform the operations by restarting the PC and the box
- Type in cmd: services.msc and check if ClientDHCP was Started and set to Auto
I may have forgotten some, but if anyone can help me it would be great. For your information, I have tried on two boxes, both of which are Freebox Revolution
Thank you in advance.
1 Left click on the internet signal in the toolbar next to the clock
2 Open the sharing center
3 On the left side of the window that opened
4 Change adapter settings
5 Then right-click on the wireless network (normally on the right)
6 Properties
7 In the list of checked boxes, there was AVG network filter driver
8 I unchecked it and magic
9 And I also uninstalled it by clicking on it just below
Problem solved