LG TV - No module

Question

Hello everyone,
I don't know if I'm in the right forum? For the past 2 days, I haven't been receiving France2 - France 3 - France 4 - France O - LCI even after searching for channels, while I have always received them. I'm getting a message saying "no CI module" - I checked the connections and everything is correct.
Could someone help me? I thank in advance those who are willing to look into my problem.
Have a good day.

jeannets · Accepted Answer

Hello,

If I’m guessing correctly what you’re not saying... it’s that you receive TV via satellite... and you don’t have the card that contains the Viaccess decoding key

Are you in France..?? Or not..??

The digital terrestrial television is encrypted on the satellite, you need the card...

Which satellite are you on..??

Jenny761 · Answer

Thank you for replying I receive TV via an antenna - I am in France in Seine-Maritime - I have been using this TV for several years and have always received all the channels well.

jeannets · Answer

OK, so I'm a little surprised...

-- Maybe the transmitter is down... we should find out if the neighborhood on the antenna is having the same problems...?

Because the missing channels correspond exactly as if a transponder had stopped working... It's the R1 transponder that isn't functioning.

We should also know the model of the LG television..??

There must be an issue in your area.. check the transmitters about it http://www.tvnt.net/forum/76-seine-maritime-t12714.html

jeannets · Answer

It is possible, depending on the weather, with your antenna at the limit of selectivity and a transmitter slightly weaker than the others, that you no longer receive it... but it should be temporary...

Or perhaps a construction has come between the relay and your house..??

The relay you refer to is a true National relay with power; are you sure you are served by that one...?? Because many people are actually on smaller local relays, funded by the region... and when there is a failure on those, it's talked about much less..

Your antenna may have taken on more oxidation... or may need a more precise orientation..??

Gil · Answer

TV CI+ tuner TNT: The Canal Ready CAM module is only necessary to decrypt Canal + via the external UHF rooftop antenna (e.g., a Trinappe) directed towards the transmitter, thus only for terrestrial TV.

If the CI+ television has built-in TNT and satellite tuners, a Viaccess Fransat CAM module is required, via a satellite dish aimed at Eutelsat 5WA...

Note: The TNT reception standard does not consider indoor TV antennas or antennas installed in attics or lofts, thus under the roof.

Andy31200 · Answer

Good evening,
This "no CI module" display is not normal and makes me think of a bug with your TV...;-(
Try unplugging it from the power socket, wait a quarter of an hour, and plug it back in.
If that doesn't work and if you have access to the menu, do a reset (return to factory settings) but you'll have to redo all the installation and settings.
I call a spade a spade *
*in French in the text

LG TV - No module

6 answers

Startup issue

Linux to replace w10

System restore from bootable windows 11 usb drive

Turn off

Return material found at a deceased cousin's house

File with some lines merged and others not

Site inaccessible

My printer won't connect to my pc anymore

Asus vivobook pc won’t boot anymore, need help

Windows 11 microphone issue