Coupling Parabolic and Antenna
DuSk
Posted messages
3
Registration date
Status
Member
Last intervention
-
Redbart Posted messages 20952 Registration date Status Member Last intervention -
Redbart Posted messages 20952 Registration date Status Member Last intervention -
Hello,
I've been racking my brains for several days. I'm trying to combine a terrestrial antenna with a satellite dish, having only one cable entering the house. I've set up the wiring as advised by a seller, but it's not working... When everything is connected, there's no signal, terrestrial or satellite. When I unplug the satellite at the coupler outside, the TNT works fine. However, when I unplug the terrestrial antenna, the satellite doesn't work, no signal. The dish is well oriented. I only have one TV/SAT/FM socket at the ORANGE decoder, all the others are simple TV sockets for TNT.
Does the schematic seem correct to you?
The equipment is as follows:
Amplifier coupler: http://www.leroymerlin.fr/v3/p/produits/amplicateur-terrestre-et-satellite-exterieur-evology-31db-maximum-e188658
Amplifier power supply: http://www.leroymerlin.fr/v3/p/produits/alimentation-terrestre-et-satellite-interieur-evology-12v-e188660
TV/Sat splitter: http://www.leroymerlin.fr/v3/p/produits/repartiteur-terrestre-et-satellite-interieur-evology-4-sorties-e36695
Thank you in advance.
Configuration: Windows / Chrome 35.0.1916.114
I've been racking my brains for several days. I'm trying to combine a terrestrial antenna with a satellite dish, having only one cable entering the house. I've set up the wiring as advised by a seller, but it's not working... When everything is connected, there's no signal, terrestrial or satellite. When I unplug the satellite at the coupler outside, the TNT works fine. However, when I unplug the terrestrial antenna, the satellite doesn't work, no signal. The dish is well oriented. I only have one TV/SAT/FM socket at the ORANGE decoder, all the others are simple TV sockets for TNT.
Does the schematic seem correct to you?
The equipment is as follows:
Amplifier coupler: http://www.leroymerlin.fr/v3/p/produits/amplicateur-terrestre-et-satellite-exterieur-evology-31db-maximum-e188658
Amplifier power supply: http://www.leroymerlin.fr/v3/p/produits/alimentation-terrestre-et-satellite-interieur-evology-12v-e188660
TV/Sat splitter: http://www.leroymerlin.fr/v3/p/produits/repartiteur-terrestre-et-satellite-interieur-evology-4-sorties-e36695
Thank you in advance.
Configuration: Windows / Chrome 35.0.1916.114
2 answers
-
Hello, it can't work, you need 2 cables: one for the satellite dish that goes to the decoder, oriented towards a satellite, and the other for the antenna with an amplifier split into 3. For the satellite dish (television), there's no need as there are already TNT channels. Make sure to secure the satellite dish well because the wind moves it… poor reception.
-
Coupling/decoupling: In the TNT (aerial) and satellite (dish) sections, the installation has been discussed,
https://forums.commentcamarche.net/forum/s/tnt-232/coupleur
A TER/SAT coupler at the top, a single coaxial descent cable and a TER/SAT decoupler at the bottom, or alternatively, a decoupling wall socket instead.
-
