The came portal flashes once when powered on
Closed
ymb14
-
irongege Posted messages 38993 Registration date Status Moderator Last intervention -
irongege Posted messages 38993 Registration date Status Moderator Last intervention -
Hello,
here is my problem: I have a sliding gate from the brand Came with a card reference ZBX 74/78. One fine morning, I couldn't open it with the remote control anymore. I opened the housing and found that mice had made their home inside the box housing the card and the motor (the card was filled with mouse droppings). I cleaned the card and changed the power fuse (because it was blown), but still nothing. I decided to have it checked by a repairman, who found that some connector pins were damaged. He repaired it, I put it back, and miracle: it worked, but the next morning it was back to square one—nothing worked again. I checked the fuse = okay.
I reinsert the fuse, and the LED blinks once, then nothing. In fact, every time I reinsert the fuse or cut the power, the LED blinks once and then goes out.
I forgot to mention that while stopping my search, I closed the box and pressed the remote control just for fun, and the motor started for about 2 seconds, and then the blinking stopped, despite the fuses being okay.
If anyone could help me, thanks in advance.
here is my problem: I have a sliding gate from the brand Came with a card reference ZBX 74/78. One fine morning, I couldn't open it with the remote control anymore. I opened the housing and found that mice had made their home inside the box housing the card and the motor (the card was filled with mouse droppings). I cleaned the card and changed the power fuse (because it was blown), but still nothing. I decided to have it checked by a repairman, who found that some connector pins were damaged. He repaired it, I put it back, and miracle: it worked, but the next morning it was back to square one—nothing worked again. I checked the fuse = okay.
I reinsert the fuse, and the LED blinks once, then nothing. In fact, every time I reinsert the fuse or cut the power, the LED blinks once and then goes out.
I forgot to mention that while stopping my search, I closed the box and pressed the remote control just for fun, and the motor started for about 2 seconds, and then the blinking stopped, despite the fuses being okay.
If anyone could help me, thanks in advance.
1 answer
-
Hello.
This question is rather off-topic in this section of the site mainly dedicated to the Web.
It would be wiser to rephrase it on https://bricolage.linternaute.com/forum/ where it can be addressed in a more targeted and relevant manner.
Thank you.
--
"Blue for the road, green for the track, and red for off-road.
1,2,3 the count is good !!!!!"
