View original (French)

Klipad GPS 4328

jean -  
 JAB74 -
Hello,

I can't get it to work; I would like the user manual, please.

Configuration: Windows XP / Internet Explorer 8.0

8 answers

  1. Esméralda31
     
    Super !! Clear and precise explanation. My GPS was stuck on navigation, and I couldn't unlock the system.
    I did as instructed and it worked very well. Thank you. Thank you.
    42
    1. JAB74
       
      Hello. Thank you, it worked very well. Best regards, Jean Bocquet.
      0
  2. jéjé
     
    Hello,

    Here is the solution

    turn on the GPS
    press the power button
    press the red arrow
    press on the navigation path
    press the arrow located on the gray rectangle (to the right of the navigator)
    press twice on the resident flash icon
    press twice on the second mobile navigator icon
    press twice on the third mobile navigator icon
    press once on the gray square in the bottom left to display a green mark in the square
    press the white square in the top right
    press the circle in the top right
    press on navigation

    And it works.
    20
    1. Eric
       
      you are amazing....thank you
      0
    2. didier
       
      Thank you, it works.
      0
    3. Ciara33 Posted messages 1 Status Member
       
      Hello, I followed what you said, but when I click on the arrow in the gray rectangle, it brings me to a split screen with 15 gray squares, and there's nothing inside. If I click on them, there's no sound, nothing happens. I can't therefore follow your advice.
      Could you please provide a solution?
      Thank you very much.
      0
    4. senegaule Posted messages 1 Status Member
       
      I have the same problem and it's really a hassle.
      Is there a solution?
      Thank you in advance for your help.
      0
    5. warior1349
       
      Hello everyone

      I had the same problem (just gray squares with nothing inside)
      fortunately for me, I had another identical one in working condition and I was able to retrieve the missing files.

      First, you need to switch the GPS to "storage" mode:
      for that go to:
      SETTINGS -> red arrow to the right -> USB then select MASS STORAGE -> little floppy disk at the top (the GPS restarts by itself)

      then connect the device to the computer, it should recognize it as a "regular" USB stick.

      And in this theoretically empty folder, if it is not the case, do a quick format
      You need to copy the folder (MobileNavigator) retrieved from the working GPS.

      SETTINGS -> red arrow to the right -> USB then select MS ACTIVESYNC -> little floppy disk at the top (the GPS restarts again by itself)

      and follow the procedure indicated above since now the first square is no longer empty :)

      For those who unfortunately cannot retrieve the folder from a valid GPS, let me know a free server where I can upload the file: 2.55 GB...

      Good luck
      0
  3. Chouettemania Posted messages 38 Status Member 23
     
    Hello,
    I have the same problem because a T Flash card (which is not provided) is needed to enter GPS mode. Otherwise, you can use it as a camera, for games, etc...
    Best regards

    The wise one is he who knows that everyone can teach him something.
    19
    1. jpd
       
      Where to buy the flash card, thank you.
      0
    2. gpsklipad Posted messages 2 Status Member
       
      I can't find one either.
      0
    3. larue
       
      I don't have a T-flash card. Where can I find one and at what price?
      0
  4. leeloo30005 Posted messages 1 Status Member 5
     
    Hello,

    I followed Jéjé's procedure correctly, thank you. The GPS is working, but it only follows the route I take without providing any guidance. Even though I activated the sound, it remains silent. Moreover, once I'm on the map, I have to press the button to exit it!!! I think I might be missing some elements. I checked that the GPS function is properly enabled. Can you help me? I'm not very skilled in this area. Thank you in advance. Leeloo3005
    5
  6. lalou
     
    Hello
    To use the GPS, simply go to settings, navigation path, click on navigation where you have a small arrow in a double rectangle, double-click on the green file, a second one will open, double-click on it, a third one will open, double-click on the third one and check the navigation parks at the bottom, then click on the floppy disk on the right to save the navigation system.

    And there you go, it's ready to go

    I hope this will be sufficient for you and that it’s clear enough; if not, don’t hesitate to ask.
    4
    1. Auroreeb
       
      I have a problem when I click on the auto-walk navigation arrow, a page opens with only black frames but I can't find any files.
      0
    2. Auroreeb
       
      Finally, the files have appeared, but when I press navigation at 30%, the GPS shows me a map data identification error. Am I required to have a T-Flash card then?
      0
    3. lalou
       
      Once the first file is open, you need to double-click on the second one and make sure to save it using the diskette icon in the top right corner, and only after that can you use the GPS.
      0
    4. lalou
       
      The flash card is not necessary, the navigation system is inside.
      0
    5. Calou
       
      I did exactly what you said for the Klipad 4328 GPS, but then when I press navigation, my GPS freezes and I can't press other buttons as if it is locked... what solution?
      0
  7. mauriceweb Posted messages 5452 Status Member 1 301
     
    Hi, type the reference of your GPS into your search engine, you have a PDF file for the user manual.
    3
  8. Xavouche69 Posted messages 1 Status Member 2
     
    Hello,
    My GPS is working well and I would like to integrate a software that indicates dangerous points like PoiWarner.
    The navigation software is Kudos Navigation version 6.3.3.3_20121217 Wave.
    The map version is NAVTEQ 2012Q2.
    I have tried to contact support: support@kliverfrance.fr but I haven't received a response.
    Can someone help me?
    Thank you in advance.
    2
    1. SAVOYARD
       
      Hello
      I don’t know if the problem is resolved, but KLIPERFRANCE Import can be reached at 0175 735 034. On our side, a contact with them regarding an issue with the delivered software did not reveal any problems regarding the modification and customer service. We will know more in 2 to 3 weeks.
      0
  9. lalou
     


    Well, so much the better, I struggled a bit to understand but it works
    so have a good trip
    0