View original (French)

Panasonic NV-VZ9 Camcorder

lisadu56 Posted messages 2 Status Member -  
 Gemini29 -
Hello,
I have a Panasonic NV-VZ9 camcorder that I got not long ago, but I don’t have any tapes to make videos, so I wanted to find out what kinds of tapes I need for my camcorder, and also if it is possible to connect it to the computer with a IEEE 1394 cable to then work on the videos.

1 answer

  1. pacal
     
    if the reference is exact "nv vz9" without interest, I advise against it
    I'll explain, it's a scope in vhsc format and moreover you don't have the "iee" input
    there are only two rca (1 video and 1 audio)
    there you go
    it goes without saying that a typing error in the reference changes the model
    nvgz and nvvz are two very different references
    0
    1. lisadu56 Posted messages 2 Status Member
       
      Well, I do have a new vz9.
      So since there is no "iee" port, I can't connect it to the computer at all (too bad...).
      After that, it's the first camcorder I've ever had, and I don't know what it's worth (brand new, I haven't looked into it yet).
      Thank you, Pascal, for your opinion, it was really helpful!
      0
    2. pascal
       
      the vhsc has been discontinued for several years, so it's an opportunity
      to connect it to your computer, you need a capture
      of the RCA A/V from your scope via USB to your computer
      0
    3. Gemini29
       
      Exactly! I have this type of camera, the Panasonic NV-VZ9; you need 30, 45, 60, or 90-minute VHS tapes. To transfer them to your computer, you need a capture device compatible with your operating system (XP, Windows 7, or Windows 8).
      0