La gravure échoue [Résolu/Fermé]

Signaler
Messages postés
43
Date d'inscription
dimanche 3 septembre 2006
Statut
Membre
Dernière intervention
20 décembre 2009
-
 rodo666 -
Bonjour,
J'avais néro 7 avec win XP SP2 et impossible de graver de DVD : tampon trop grand
Par contre c'était OK pour les CD

j'ai essayé avec deux types de DVD

j'ai sauvegardé la log et j'avoue ne pas comprendre d'ou provient le pb

j'ai mis à jour le firmware de mon graveur

Ensuite j'ai désinstaller completement nero7 puis installé cdbunerxppro
J'ai le meme problème, je ne grave ni CD ni DVD (alors qu'avec nero je parvenais à graver un CD!!!!)

error sense data : SENSE KEY:FF ASC:0 ASCQ:57

j'ai cherché sur google et jusqu'à présent rien de probant, je suis bloqué

Merci pour votre aide, je sèche depuis des semaines sur ce pb
Loïc

Ci dessous la trace d'erreur de Nero7

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <ASUS CD-S360 >Version: 2.20 - HA 1 TA 1 - 7.0.0.0
Adapter driver: <IDE> HA 1

Scsi-Device-Map


DiskPeripheral : ST320420A 3.21 viadsk Port 0 ID 0 DMA: Off
DiskPeripheral : ST380012ACE 4.07 viadsk Port 0 ID 1 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1693SKS0B viadsk Port 1 ID 0 DMA: Off
CdRomPeripheral : ASUS CD-S360 2.20 viadsk Port 1 ID 1 DMA: Off

CDRom-Device-Map


LITE-ON DVDRW SOHW-1693S E: CDRom0
ASUS CD-S360 G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523764kB)
Free physical memory: 161MB (165044kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

14.1.2007
Compilation ISO
17:59:04 #1 Text 0 File Isodoc.cpp, Line 6410
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

17:59:05 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 72704KB of Memory

17:59:05 #3 Text 0 File Reader.cpp, Line 124
Reader running

17:59:05 #4 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVDRW SOHW-1693S running

17:59:05 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)

17:59:05 #6 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

17:59:05 #7 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 688543 (153:00.43, 1344MB)

17:59:05 #8 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

17:59:05 #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

17:59:05 #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:59:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 688544 (688544) = #688544/153:0.44
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 688544 blocks [E: LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------

17:59:05 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [E: LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1410138112, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
688544 | lead-out | 1 | 0x41 | 0x00

17:59:05 #13 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

17:59:05 #14 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started

17:59:05 #15 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.

17:59:05 #16 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed

17:59:05 #17 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 4x (5 540 Ko/s)

17:59:41 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

17:59:41 #19 Text 0 File DVDR.cpp, Line 2469
Recording mode: Sequential Recording Mode for Multisession

17:59:41 #20 Text 0 File MMC.cpp, Line 21541
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

17:59:41 #21 Text 0 File DVDR.cpp, Line 2624
Start write address at LBA 0
DVD high compatibility mode: Yes

17:59:41 #22 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17:59:42 #23 SPTI -31 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x04110000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

17:59:42 #24 SPTI -31 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0476b600: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

17:59:42 #25 Text 0 File MMC.cpp, Line 19172
Writer-Buffer for E: LITE-ON DVDRW SOHW-1693S reduced to 32768Bytes

17:59:42 #26 SPTI -31 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 10 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0476b600: Len x8000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

17:59:42 #27 CDR -31 File Writer.cpp, Line 302
Buffer too large
E: LITE-ON DVDRW SOHW-1693S

17:59:43 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

17:59:43 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

17:59:43 #30 Text 0 File DVDR.cpp, Line 2866
EndDAO: Last written address was -1

17:59:43 #31 Phase 133 File dlgbrnst.cpp, Line 1724
Writing short lead-out

17:59:43 #32 SPTI -1176 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04

17:59:43 #33 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
E: LITE-ON DVDRW SOHW-1693S

17:59:43 #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

17:59:43 #35 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 4x (5 540 Ko/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.1.1.42 , size=24698 bytes, created 09/01/2004 16:01:56

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

22 réponses

merci javais le meme prob :)
Bonjour,

je relance ce sujet,

j'ai essayé la désactivation, le désinstallement et tout et je peux toujours pas graver de, probleme de DMA e (enfin un coup ca fait erreur un coup ca marche !!) pour les dvds ca tourne en rond...

si qqn à qqch à me suggérer je suis preneur !

merci infiniment
et voila le log,,,

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.9.6.0
Internal Version: 7, 9, 6, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GH20NS10>Version: EL00 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVDRAM GH20NS10 >Version: EL00 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3500320AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GH20NS10 atapi Port 2 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GH20NS10 E: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2097151kB)
Free physical memory: 2047MB (2097151kB)
Memory in use : 23 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.10.2008
CD-ROM (ISO)
21:37:16 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

21:37:16 #2 Text 0 File Isodoc.cpp, Line 6663
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

21:37:16 #3 Text 0 File Burncd.cpp, Line 3196
HL-DT-ST DVDRAM GH20NS10
Protection contre les ruptures activés

21:37:17 #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

21:37:17 #5 Text 0 File Burncd.cpp, Line 3508
Turn on Track-At-Once, using CD-R/RW media

21:37:17 #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359847 ( 79:59.72)
Last address to be written: 75927 ( 16:54.27)

21:37:17 #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

21:37:17 #8 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: HL-DT-ST DVDRAM GH20NS10;
CDR code: 00 97 34 23; OSJ entry from: Mitsubishi Chemical
ATIP Data:
Special Info [hex] 1: C0 00 98, 2: 61 22 17 (LI 97:34.23), 3: 4F 3B 49 (LO 79:59.73)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

21:37:17 #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

21:37:17 #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 75928 (75928) = #75928/16:52.28
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 75926 blocks [E: HL-DT-ST DVDRAM GH20NS10]
--------------------------------------------------------------

21:37:17 #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST DVDRAM GH20NS10] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 155807744, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 75928 | 0 | 0x00
75928 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

21:37:17 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 1. Length: 75928 -> 75926.

21:37:17 #13 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

21:37:17 #14 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

21:37:17 #15 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

21:37:17 #16 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

21:37:17 #17 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

21:37:17 #18 Phase 32 File dlgbrnst.cpp, Line 1762
Simulation started at 48x (7'200 Ko/s)

21:37:17 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

21:37:17 #20 Text 0 File MMC.cpp, Line 22363
Set BUFE: Buffer underrun protection -> ON

21:37:17 #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

21:37:28 #22 SPTI -1502 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 27 E0 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 29 E2 74 80 08 03
Buffer x0a415000: Len x10000
0xA7 EB 6F E8 EF 9B 62 90 29 26 D7 8F D5 89 01 08
0x48 54 3E F7 A8 1F DD 08 31 58 2A 07 E0 71 54 A8
0x6D 86 84 AF 4A 25 AB 06 FA AB 7D EA 5C 3F 05 01

21:37:28 #23 CDR -1502 File Writer.cpp, Line 303
DMA-driver error, CRC error
E: HL-DT-ST DVDRAM GH20NS10

21:37:30 #24 CDR -201 File WriterStatus.cpp, Line 152
Invalid write state
E: HL-DT-ST DVDRAM GH20NS10

21:37:30 #25 TRANSFER -18 File WriterStatus.cpp, Line 152
Could not perform EndTrack

21:37:31 #26 Phase 34 File dlgbrnst.cpp, Line 1762
Simulation failed at 48x (7'200 Ko/s)

21:37:32 #27 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

21:37:37 #28 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

21:37:37 #29 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)