"Echec de la communication" sous Nero6

bonjour,

j'ai 0% de reussite en gravure DVD actuellement...tous plantent malgré des changements de config...
J'ai tenté de bouger l'ultra buffer, pas de résultats; testé les vitesses de lecture: elles sont à +/- 6000 ko/s, je grave en 5x ( sauf dans cet exemple, mais ca ne change rien!!)

La gravure débute bien, buffer et cache pleins, et 5' plus tard: echec de commuhication.

DVD+R memorex

exemple:


Windows 98 4.10
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 23/01/00 23:43:14
ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/04 17:33:44
Version de Nero : 6.3.1.20
Graveur : <PHILIPS DVDR1640P> Version: P3.5 - HA 1 TA 1 - 6.3.1.20
Pilote d'adaptateur :<ESDI_506> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM : <PIONEER DVD-ROM DVD-114 >Version: 1.22 - HA 0 TA 1 - 6.3.1.20
Pilote d'adaptateur :<ESDI_506> HA 0
PIONEER DVD-ROM DVD-114 (Target 1, Q:): Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
PHILIPS DVDR1640P (Target 1, R:): Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
Excluded drive IDs:
WriteBufferSize: 78643200 (78643200) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 191MB (195944kB)
Free physical memory: 0MB (36kB)
Memory in use : 93 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.1.2007
Compilation ISO
20:59:05 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

20:59:05 #2 Text 0 File Reader.cpp, Line 126
Reader running

20:59:05 #3 Text 0 File Writer.cpp, Line 124
Writer PHILIPS DVDR1640P running

20:59:05 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

20:59:05 #5 Text 0 File Burncd.cpp, Line 3173
Turn on Disque entier, using DVD media

20:59:05 #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2256367 (501:24.67, 4406MB)

20:59:05 #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)

20:59:05 #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: PHILIPS DVDR1640P, Media type: DVD+R

20:59:05 #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20:59:05 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2256368 (2256368) = #2256368/501:24.68
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2256368 blocks [PHILIPS DVDR1640P ]
--------------------------------------------------------------

20:59:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [PHILIPS DVDR1640P ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4621041664, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2256368 | lead-out | 1 | 0x00 | 0x41

20:59:06 #12 Phase 24 File dlgbrnst.cpp, Line 1855
Début de mise en cache des fichiers

20:59:06 #13 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.

20:59:06 #14 Phase 25 File dlgbrnst.cpp, Line 1855
Cache des fichiers terminé

20:59:06 #15 Phase 36 File dlgbrnst.cpp, Line 1855
Début de gravure à 4x (5 540 Ko/s)

20:59:06 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20:59:06 #17 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x05515000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00

20:59:06 #18 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 14:06,929 (846929ms) -> OK

20:59:06 #19 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes

21:05:43 #20 SCSI -1024 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02AA0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x0F 0x26 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x08 0x03

21:05:43 #21 CDR -1024 File Writer.cpp, Line 304
Échec de la communication

21:05:43 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

21:05:43 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

21:06:03 #24 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

21:06:03 #25 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

21:06:03 #26 Phase 38 File dlgbrnst.cpp, Line 1855
La gravure a échoué à 4x (5 540 Ko/s)


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 05/05/99 22:22:00
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/02 11:55:38
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (089), size=197984 bytes, created 03/03/01 04:55:54
File 'IoSubsys\CDRALVSD.VXD': Ver=1.00 (1030), size=20047 bytes, created 03/03/01 04:55:54
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 03/03/01 04:55:54
File 'IoSubsys\DRVWPPQT.VXD': Ver=3.10.36a, size=228223 bytes, created 05/05/99 22:22:00
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 05/05/99 22:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 05/05/99 22:22:00
File '..\System32\Drivers\Ntmap.sys': Ver=4.10.2222, size=9360 bytes, created 05/05/99 22:22:00
File 'IoSubsys\Ntmaphlp.pdr': Ver=4.10.2222, size=9825 bytes, created 05/05/99 22:22:00
File '..\System32\Drivers\Sbp2port.sys': Ver=4.10.2222, size=32592 bytes, created 05/05/99 22:22:00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69578 bytes, created 05/05/99 22:22:00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 05/05/99 22:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 05/05/99 22:22:00 (Adapter driver for rec)

Registry Keys:



MERCI de votre soutien!