Cisco 827

Résolu/Fermé
ALBATOR_123 Messages postés 160 Date d'inscription mardi 17 avril 2012 Statut Membre Dernière intervention 31 octobre 2019 - 10 juil. 2012 à 12:01
brupala Messages postés 110294 Date d'inscription lundi 16 juillet 2001 Statut Membre Dernière intervention 3 octobre 2024 - 17 juil. 2012 à 12:53
Bonjour à tous,

Je viens de recuperer un routeur cisco 827 series qui était installé sur un réseau en agence.
Je voulais savoir comment me connecter en mode console a ce routeur afin de le réinitialiser et s'entrainer la dessus.

Savez vous comment s'y connecter avec l'hyper terminal? quelle vitesse etc...
Sachant qu'il y avait un mot de passe, comment le réinitialiser?

Je me connecte avec les paramtres par defaut de l'hyper terminal mais je n'ai rien à l'ecran

Merci de votre aide ou de vos questions...

2 réponses

ALBATOR_123 Messages postés 160 Date d'inscription mardi 17 avril 2012 Statut Membre Dernière intervention 31 octobre 2019 12
10 juil. 2012 à 12:07
J'ai du mieux :

00:15:15: %PQUICC-1-LOSTCARR: Unit 0, lost carrier. Transceiver problem?

Evidemment le port ADSL du routeur n'est pas connecté!
Mais comment faire pour revenir a la config d'origine...
0
brupala Messages postés 110294 Date d'inscription lundi 16 juillet 2001 Statut Membre Dernière intervention 3 octobre 2024 13 796
17 juil. 2012 à 12:53
pour effecer la config:
write erase en mode enable, bien sûr (suppose que tu ais le mot de passe).
0
ALBATOR_123 Messages postés 160 Date d'inscription mardi 17 avril 2012 Statut Membre Dernière intervention 31 octobre 2019 12
Modifié par ALBATOR_123 le 10/07/2012 à 12:21
Voila ce que j'ai au demarrage avec les parametres suivants :

9600 baud rate No parity 8 data bits 1 stop bit No flow control


System Bootstrap, Version 12.2(1r)XE2, RELEASE SOFTWARE (fc1)
TAC Support: https://cloudsso.cisco.com/sp/startSSO.ping?SpSessionAuthnAdapterId=standardnomfa&TargetResource=https://sso.cisco.com/autho/login2/loginaction.html
Copyright (c) 2001 by cisco Systems, Inc.
C827 platform with 32768 Kbytes of main memory

program load complete, entry point: 0x80013000, size: 0x39d1e0
Self decompressing the image : #################################################
##################### [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco Internetwork Operating System Software
IOS (tm) C820 Software (C820-Y6-M), Version 12.2(8)T5, RELEASE SOFTWARE (fc1)
TAC Support: https://www.cisco.com/tac/
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 21-Jun-02 15:10 by ccai
Image text-base: 0x80013170, data-base: 0x806A1944

CISCO C827 (MPC855T) processor (revision 0x801) with 31744K/1024K bytes of memor
y.
Processor board ID JAD07030AQB (3339368936), with hardware revision 0000
CPU rev number 5
Bridging software.
1 Ethernet/IEEE 802.3 interface(s)
1 ATM network interface(s)
128K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
2048K bytes of processor board Web flash (Read/Write)


Ê


Press RETURN to get started!


00:00:06: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
00:00:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed sta
te to up
00:00:10: %LINK-3-UPDOWN: Interface ATM0, changed state to down
00:00:11: %SYS-5-CONFIG_I: Configured from memory by console
00:00:11: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, changed state to
down
00:00:15: %PQUICC-1-LOSTCARR: Unit 0, lost carrier. Transceiver problem?
0