View original (French)

Merge 2 iso files into one installation

Solved
pilotdu80en80 Posted messages 327 Status Member -  
Bustasyl Posted messages 863 Status Member -
Hello,

I have 2 ISO files, and I would like to install them using Daemon Tools,
please help me.

Thank you in advance.

Configuration: top secret

10 answers

  1. Anonymous user
     
    You need to mount the ISO image with Daemon Tools and after that, you will be able to perform an installation.
    0
  2. pilotdu80en80 Posted messages 327 Status Member 3
     
    Thank you, I did it except that it opens a folder with an icon inside and a "blue cabinet" with "data3" written underneath.

    I set up a virtual drive but apparently it doesn't work.
    0
  3. Anonymous user
     
    your iso may be incorrect, non-compliant for installation

    If you open the mounted cd, do you have a setup??
    0
  4. pilotdu80en80 Posted messages 327 Status Member 3
     
    no, well yes
    0
  7. pilotdu80en80 Posted messages 327 Status Member 3
     
    --->g 2 DVDs:

    the first one is the exe
    the second one is the sequel to the exe

    I can run DVD 1, but DVD 2 is a folder with files inside, as mentioned above.
    0
    1. Bustasyl Posted messages 863 Status Member 165
       
      so no worries, you mount your 2 images in Daemon Tools and you run the .exe of your DVD 1 during your installation, it will directly look for the data on your DVD 2...
      0
    2. pilotdu80en80 Posted messages 327 Status Member 3
       
      ok, so,
      I create a virtual drive,
      I click on it,
      I do "Mount" or "Add an image" ????
      I select DVD 1,
      I select DVD 2
      I click on "Create disk image"

      and that's it?
      0
    3. Bustasyl Posted messages 863 Status Member 165
       
      no, that's not it, you first mount your 1 DVD on a virtual drive and on a second virtual drive you mount the second one, as far as I remember you can have 4 virtual drives with Daemon Tools...
      You need to have both virtual drives active at the same time...
      0
  8. Anonymous user
     
    you have the ability to create 2 virtual DVD drives and then you mount the DVDs and launch from the first DVD where there is a .exe
    0
  9. pilotdu80en80 Posted messages 327 Status Member 3
     
    How to make him active at the same time,
    do they need to be launched at the same time?
    0
  10. Anonymous user
     
    1. You create 2 DVD players

    2. You load the first DVD and then the second on the 2 players
    so you have DVD1 loaded and DVD2

    3. You start DVD1
    0
  11. pilotdu80en80 Posted messages 327 Status Member 3
     
    for the creation of the 2 players, okay

    then I mounted DVD 1 and 2 on the first player
    and DVD 2 on the second player, that's right

    PS: sorry if I don't understand very well :/
    0
    1. Bustasyl Posted messages 863 Status Member 165
       
      1 on each, it's simple!

      1st virtual drive: DVD1
      2nd virtual drive: DVD2
      0
    2. pilotdu80en80 Posted messages 327 Status Member 3
       
      Okay, I'm starting DVD 1.
      0
    3. Bustasyl Posted messages 863 Status Member 165
       
      Yes, that's it. Double click on DVD1 in My Computer. If nothing happens, open it and click on "setup.exe".
      0
    4. pilotdu80en80 Posted messages 327 Status Member 3
       
      yeah, a player for each DVD, right?
      0
    5. pilotdu80en80 Posted messages 327 Status Member 3
       
      ok it seems to be good, I'll keep you posted,
      thank you

      another question:
      what is the difference between a virtual drive DT and SCSI ??
      0