View original (French)

Weather Station Auriol Z29536

Solved
pfgbel -  
automnale60 Posted messages 1 Status Membre -
Hello,
I have this weather station that works really well except for the display "19" (the atmospheric pressure from the previous hour) which stubbornly stays at "0".
I believe I followed the operating procedure for creating a history (history/weather, 3sec,...)
Could someone help me?
Thank you in advance!
pol

3 réponses

Réponse 1 / 3
thierry63
 
I'm the one where the outside temperature doesn't display???? Unless I put the transmitter very close, it then picks up the temperature for a certain time and then no longer picks it up???? I don't understand anything.
85
monray
 
Good evening, I've had the same problem for 3 days, tried everything: batteries, reset, settings, and nothing works?
0
monegib
 
I have the same problem, I can't get the outside temperature to display again. I've changed the batteries in both devices but still nothing.
2
automnale60 Posted messages 1 Status Membre > monegib
 
When changing the batteries of both devices (sensor or station) or one of the two, it is essential to repeat exactly the setup procedure as during the initial installation. I followed this advice found in the manual of a "high-end" station for my Auriol Z29962A from Lidl and... it works!
I hope to help someone... sooner or later.
0
deblaer
 
I have the same problem with the outdoor temperature; there is no reading on the dial.
0